Verdant VX3-TW-KT-W Wireless Energy Thermostat Product Specifications Guide
- October 30, 2023
- Verdant
Table of Contents
Verdant VX3-TW-KT-W Wireless Energy Thermostat
View all Verdant thermostat manual
INTRODUCTION
The Verdant VX Series Thermostat delivers unprecedented energy savings without compromising guest comfort. An integrated occupancy sensor allows for energy saving when rooms are unoccupied. Energy-saving presets eliminate guesswork and make it easy to adjust the energy-saving settings. A patented “Night Occupancy” feature ensures comfort while guests are sleeping. Built-in wireless mesh networking enables optional online management features. Fully configurable settings allow for the customization of energy savings to fit any situation.
- Temperature Setback automatically adjusts the temperature when rooms are unoccupied to save energy.
- Temperature Recovery allows for setting a maximum time permitted for establishing a comfortable room temperature.
- Setback Optimization monitors the temperature recovery rate and optimizes setback temperatures.
- Setback Limits control the maximum and minimum room temperature when a room is in setback mode.
- Set Point Limits prevent guests from setting the room temperature to extreme, energy-wasting levels
Typical HVAC Applications
- PTAC with Electric Heat
- FCU 2-Pipe, 2 Fan, with Electric Heat
- Heat Pump, 2 Fan, with Electric Heat
- FCU, 2/4-Pipe, ECM Fan
- PTHP with Electric Heat
- FCU 4-Pipe, 3 Fan
- WSHP, 2 Fan, with Electric Heat
- VRF Systems (Part # VX-RSW-W)
Case Dimensions (Imperial) | 4.02 x 5.51” x 0.93” | 4.84” x 2.76” x 1.02” |
---|---|---|
Case Dimensions (Metric) | 102mm x 140mm x 23.5mm | 123mm x 70mm x 26mm |
Screen Dimensions (Imperial) | 3.63” x 2.13” | N/A |
Screen Dimensions (Metric) | 92mm x 54mm | N/A |
Operating Voltage | 2 “AA” Cell Batteries/24AC | 24VAC |
Control Inputs/Outputs
| | Fan High (GH)| Analog Input 1
Fan Low (GL)| Analog Input 2
Compressor (Y)| Analog Input 3
Heat Pump (OB)| Analog Output 1
Heat (W)| Analog Output 2
AUX 1| Analog Output 3
AUX 2| RS485 Output 1
| RS485 Output 2
12VDC Input
12VDC Output
Occupancy Sensor Beam Width (Angular degrees)| ±47° (94°)| N/A
Wireless Frequency| 902-928MHz| 902-928MHz
Temperature Accuracy(Fahrenheit)| ±1°F| N/A
FCC ID| XEYWX-DB| XEY-ZX-LV
IC| 8410A-WXDB| 8410A-ZXLV
FCC
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
- THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
- THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
PURSUANT TO PART 15.21 OF THE FCC RULES, ANY CHANGES OR MODIFICATIONS TO THIS EQUIPMENT NOT EXPRESSLY APPROVED BY VERDANT ENVIRONMENTAL TECHNOLOGIES, INC. MAY VOID VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT
VERDANT
- Requires a network access license for each thermostat (Part Number: XMF) and one “Online Connection Kit” (Part Number: OL-KT).
- Additional fees apply. 020421 Emerson is a trademark of Emerson Electric Co.
- ©2021 Emerson Climate Technologies, Inc. All rights reserved.
Verdant VX3-TW-KT-W Wireless Energy Thermostat Product Specifications Guide