XHDATA D-368 Bands Stereo Radio User Manual
- June 9, 2024
- XHDATA
Table of Contents
XHDATA D-368 Bands Stereo Radio
Function button description
- Mode switch
- Previous key
- Play /pause key
- Next key
- DC 5V Input socket
- Charging LED / Tuning led
- TF card socket
- USB socket
- Radio tuning button
- Power/function switch
- Volume button
- Radio band button
- Antenna
- Stereo headphone jack
- Stereo led
Radio function operation
-
Turn on the power switch ⑩ to the radio gear and adjust the right volume.
-
Push the function switch ⑫to your favorite band.
-
When listening to FM or SW band, please pull out the rod antenna and adjust it to the best receiving angle ⑬.
When listening to AM band, please rotate the body to adjust to the best receiving angle. -
Turn the tuning button ⑨ slowly to select the radio station.
FM stereo operation
- Plug in stereo headphones during FM radio. When the stereo light is on, you can enjoy stereo music
USB/TF MP3 playing function
- Turn on the power ⑩ switch to MP3 and adjust the right volume.
- Insert the USB or TF card into the corresponding socket⑦ ⑧
- Short press the previous ② or next ④button to select the previous or next song. Long press these two buttons for fast reverse or fast forward function.
- Short press ③ to pause. Press again to resume playback.
- Long press the play key for 3 seconds, and when “one” is displayed, it is in single play status. Long press again, and “all” is displayed in all play status.
- Long press ① is Bluetooth, short press in order to play Bluetooth /USB.
Wireless BT play function
- Turn on the power ⑩switch to MP3 and adjust the right volume.
- When the USB or TF card is not plugged in, the machine will play Bluetooth connection by default.
- Turn on the Bluetooth connection of mobile phone “D-368”
- Short press the previous ② or next ④ button to select the previous or next song.
- Long press the “play” key ⑦ for 3 seconds to forcibly disconnect the currently connected device, and then press it again to restore the connection.
Charging function operation
- Plug the charging cable into the “DC5V in”⑤ charging port and the other end into the 5V USB out put port of the mobile phone adapter.
- When the battery is fully charged, the LED is off.
SPECIFICATIONS
- FM1:87-108MHZ SW1-9:4.75-22.0MHZ
- FM2:64-108MHZ DC IN:5V≧1000mA
- AM:522-1620KHZ DC :3.7V (18650)
Skype: radiwow
Email: xhdatacn@gmail.com
Facebook: XHDATA https://www.xhdata.com.cn
Whatsapp: +86 18025193267
MADE IN CHINA
References
Read User Manual Online (PDF format)
Loading......