QUOIZEL FTS3124EK and FTS3124MM Silver Ceiling Fan Installation Guide

INSTALLATION GUIDE FOR

FTS3124EK and FTS3124MM

WARNINGS AND CAUTIONS                       Released Date: 2022-04-08

READ AND SAVE THESE INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, install or operate the product.

WARNING

• RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
• RISK OF PERSONAL INJURY – DO NOT bend the blades when installing the fan, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.
• RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY – mount to outlet box marked (acceptable for fan support of 22.7kg(50lbs) or less) and use mounting screws provided with the outlet box.
• All set screws must be checked, and re-tightened where necessary, before installation.
• After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and the ungrounded conductor on the other side of the outlet box.
• Suitable for use with solid-state speed controls.
• use only with light kits marked suitable for use in damp locations.
• This unit weighs 14.5 kg (31.9 lbs).

CAUTION

• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Disconnect fixture from the power source before replacing bulbs or cleaning. Make sure the bulbs are given sufficient time to cool be before removing.

TOOLS REQUIRED

CARE AND MAINTENANCE

• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.

If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am – 5:00pm EST), or visit us on-line at www.quoizel.com.

PACKAGE CONTENTS

[A] Rod Assembly
x 1
[B] 12″L Rod
x 1
[C] Ceiling Canopy
x 1
[D] Ceiling Canopy Cap
x 1
[E] Receiver
x 1
[F] Fan Blade
x 1
[G] Blade Assembly Nut
x 1
[H] LED Bulb
x 4

[G] Rubber Washer
x 16
[H] Lock Screw
x 16
[I] Fixture Body
x 1
[J] Glass Panel
x 8

PACKAGE CONTENTS (PARTS BAG 1)

[AA] Lock Washer
x 4
[BB] Spring Washer
x 4
[CC] Flat Washer
x 4
[DD] Wire Connector
[1pc replacement connector included] x 7
[EE] Screw
x 2
[FF] Mechanical Screw
x 2
[GG] Hanger Frame
x 1

PACKAGE CONTENTS (PARTS BAG 2)

[HH] Spring Washer
x 1
[II] Flat Washer
x 1
[JJ] Wall Anchor
x 1
[KK] Screw
x 1
[LL] Fastener with Set Screw
x 1

PACKAGE CONTENTS (PARTS BAG 3)

[MM] Remote Control Transmitter
x 1
[NN] 9V Battery
x 1
[OO] Wall Bracket
x 1
[PP] Screw
x 2

INSTALLATION

[1] Install Glass Panels

[2] Install Hanger Frame

1. CEILING

2. Outlet box

3. 9/64″ pilot hole

4. Use wood screws
   When securing to support structure with approved electrical outlet box. Drill 9/64” pilot holes.

5. Use machine screws
   when securing to existing ceiling fan-rated outlet box.
   that supports of 50 lbs (22.72 kg) or less.

This fan cannot be used for the ceiling which angle is greater than 10 degree.

For angled ceilings, point opening toward peak.

[3] Choose Rod

1. OPTION 1
   Standard Downrod
   (Included – Pre-assembled)
   for ceilings 11 Feet high

2. OPTION 2
   Longer Downrod
   (Included)
   for angled ceilings or ceilings 12 or higher

3. SKIP TO NEXT STEP

4. Steps 1-3 to remove standard downrod

5. Steps 4-6 to assemble longer downrod

[4] Install Rod to Fixture Body

1. Steps 1-2 to remove pin
2. Install ceiling canopy & ceiling canopy cap
3. Remove set screws on fixture body
4. Install rod
5. Install pin
6. Install set screws

[5] Install Rod to Hanger Frame

1. Pick the fan up by the down rod only.
   Place the downrod ball into the slot in the ceiling bracket.

[6] Install Safety Cable

1. 5/16″ pilot hole
2. Optional: for concrete ceiling

[7] Wiring

1. White wire from outlet box
2. Black (or Red) wire from outlet box
3. Black wire from receiver with the Label “AC N”
4. Black wire from receiver with the Label “AC L”
5. White Wire from receiver with the Label “N”
6. Black wire from receiver with the Label “MOTOR L”
7. Blue wire from receiver with the Label “LIGHT L”
8. White wire from fixture identified with the Label “N”
9. Black wire from fixture identified with the Label “MOTOR L”
10. Blue wire from fixture identified with the Label “LIGHT L”
11. Green Ground Screw on the Crossbar
12. Bare, or Green Ground wire from outlet box
13. Ground wire from Fixture
14. Ground wire from Hanger Frame

[8] Place Controller to Hanger Frame

[9] Install Ceiling Canopy and Cap

[10] Install Fan Blade

1. Remove pin
2. Attach fan blade
3. Install pin
4. Install blade assembly nut

[11] Install Bulbs

Install four correct bulbs referring to fixture markings and/or labels for maximum wattage.

Recommended Bulb Type (included):

1. BULB BASE TYPE
   Medium (E26)

2. BULB TYPE
   TYPE LED

[12] Install Wall Bracket

[13] Install Battery to Remote Control Transmitter

1. Remove back cover and battery

2. Match the codes on receiver and remote

3. Remove the rubber stopper from the receiver. Then the code must be the same for both receiver and remote. Place the previously removed rubber stopper back in the receiver.

4. Receiver

5. Antenna

6. Remote

7. Battery
   6F22 9V

8. Connect battery

9. Install battery and back cover

OPERATION:

1. Light button :
   Press it to turn on the lights. Press it again to turn off the lights. Long press it, the bulbs will be dimmable.

2. HI, MED, LOW, OFF buttons: To adjust fan speed.

ADDITIONAL FUNCTIONS

[14] Reverse Fan Blade (Optional)

1. Reversing Switch

Reverse Switch Information

Season| Rotation Direction|

Switch Position

Summer

| Counterclockwise| Left
Winter| Clockwise|

Right

Note:

1. If airflow is desired in the opposite direction, turn the fan off and wait for the blades to stop turning.
2. Push the reverse switch to Left or Right completely.

Your installation is now complete!  Restore electricity and save this sheet for future reference.

Documents / Resources

| QUOIZEL FTS3124EK and FTS3124MM Silver Ceiling Fan [pdf] Installation Guide
FTS3124EK, FTS3124MM, FTS3124EK and FTS3124MM Silver Ceiling Fan, FTS3124EK Silver Ceiling Fan, FTS3124MM Silver Ceiling Fan, Silver Ceiling Fan, Fan, Silver Fan, Ceiling Fan
---|---

References

• Quoizel | Artisans In Lighting

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>