Arissa Slotted Sprung Basin Waste Instruction Manual
- October 30, 2023
- Arissa
Table of Contents
Arissa Slotted Sprung Basin Waste Instruction Manual
Parts:
- Cover Cap
- Washer
- Spring
- Waste body
- Washer
- Rubber Gasket
- Back Nut
Installation:
I. Identify all components are present prior to installation
II. Fit the waste body (4) and washer (5) to the sink
III. Fit the Rubber Gasket (6) to the underneath of the sink as shown in the
diagram, secure by tightening the Back nut (7)
IV. Fit the Cover Cap (1) to the brass Click-clack spring (3)
V. Check all joints and connections for leaks
Aftercare:
Whilst modern plating techniques are used in the manufacture of this product,
the surface will be affected if cleaned incorrectly.
Surfaces should be maintained using a clean damp cloth, NO corrosive and
abrasive agents or materials should be used or come into contact with the
surface finish, or this will invalidate your product warranty.