Arissa Brushed Brass Click Clack Unslotted Basin Waste Instructions

Arissa Brushed Brass Click Clack Unslotted Basin Waste

Part

This product consists of the following parts:

1. Cover Cap
2. Washer
3. Spring
4. Waste Body
5. Washer
6. Rubber Gasket
7. Back Nut

Installation Instructions

1. Before installation, ensure that all components are present.
2. Fit the waste body (4) and washer (5) to the sink.
3. Fit the Rubber Gasket (6) to the underneath of the sink as shown in the diagram.
4. Secure the Rubber Gasket by tightening the Back Nut (7).
5. Fit the Cover Cap (1) to the brass Click-clack spring (3).
6. Check all joints and connections for leaks.

Aftercare Instructions

While modern plating techniques are used in the manufacture of this product, the surface will be affected if cleaned incorrectly. To maintain the surface, use a clean damp cloth. Do not use any corrosive or abrasive agents or materials as they may damage the surface finish and invalidate your product warranty.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>