KLEIN TOOLS ELITE AESEB2 Bluetooth Jobsite Earbuds User Guide

KLEIN TOOLS ELITE AESEB2 Bluetooth Jobsite Earbuds

Product Information

• Product Name: AESEB2 ELITE
• Language : English
• Instruction Manual: Included

Product Usage Instructions

1. Make sure the product is properly connected to a power source.
2. Press the power button to turn on the device.
3. Use the control panel to adjust the settings according to your preferences.
4. Refer to the instruction manual for detailed information on different features and functions.
5. To turn off the device, press and hold the power button until it shuts down.
6. Always unplug the product from the power source when not in use or during maintenance.
7. Keep the product away from water and avoid exposing it to extreme temperatures.
8. If you encounter any issues or need assistance, refer to the troubleshooting section in the instruction manual or contact our customer support.

GENERAL SPECIFICATIONS

Klein Tools AESEB2 ELITE Jobsite Bluetooth Earbuds combine hearing protection, up to 25NRR using the included memory-foam tips, with an immersive audio experience featuring rich bass, clear mids and crisp treble.

• Earbud Dimensions: 0.74″ × 0.85″ × 1.26″ (18.9 × 21.8 × 32.0 mm)

• Charging Case Dimensions: 2.44″ × 1.57″ × 1.67″ (62.0 × 40.0 × 42.5 mm)

• Weight (Charging Case and Earbuds): 2.03 oz. (57.5 g)

• Bluetooth® Version: 5.2

• Bluetooth® Connection Range: 32.8 ft. (10 m) in open space

• Hearing Protection: 25dB NRR (with memory foam tips)

• Support Profiles: H SP1.2/ HFP1.8/ A2DP1.3.2/ AVRCP1.6.2/ SPP1.2/AVDTP1.3/ AVCTP1.4/ GAVDP1.3

• Frequency Response: 20Hz – 20kHz

• Earbud Battery Type: Li-Ion Coin Cell, 3.7V / 45mAh (0.167Wh each)

• Case Battery Type: Li-polymer, 3.7V / 400mAh (1.48Wh)

• Charging Requirements: Maximum 5V DC, Minimum 0.7A

• Charge Time: Earbuds: Approx. 2 hours Case: Approx. 2 hours

• Runtime (at 70% volume): ~8 hours w/ earbuds only, ~24 hours w/ charging case

• Certified cations : FCC, IC, DOE/CEC, NRCAN, BQB

• Earbuds: FCC ID: 2AI28-AESEB2 IC: 21655-AESEB2

• Case: FCC ID : 2AI28-AESEB2C IC: 21655-AESEB2C

• Operating/Charging Temperature: 32° to 113°F (0° to 45°C)

• Storage Temperature: 14° to 122°F (-10° to 50°C)
  NOTE : Periodic recharging is recommended during prolonged storage.

• Relative Humidity : <75% non-condensing

• Drop Protection : 9.8′ (3m)

• Ingress Protection (IP) Rating: Earbuds: IP67 Case: IP5X

CONTENTS

• AESEB2 ELITE Bluetooth® Jobsite Earbuds
• Charging Case
• 2′ (61 cm) USB-A to USB-C Cable
• 3 Sets of Memory Foam Tips (for hearing protection)
• 3 Sets of Silicone Tips (for casual listening)
• This instruction manual

SYMBOLS ON PRODUCT

1. Warning or Caution
2. Risk of Electrical Shock
3. Read Instructions

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Klein Tools, Inc. is under license.

WARNINGS:  Read, understand, and follow these instructions to ensure safe operation. Keep these instructions for future reference. These hearing protectors help reduce exposure to hazardous noise and other loud sounds. Misuse or failure to wear hearing protection at all times that you are exposed to noise may result in hearing loss or injury.

• Silicone tips on earbuds DO NOT provide hearing protection.
• ONLY memory foam tips on earbuds provide hearing protection.
• Use only appropriately sized Klein Tools memory foam tips for hearing protection in loud-noise environments. Improper fit of this device will reduce its effectiveness in attenuating noise. Consult the OPERATING INSTRUCTIONS section for proper fit.
• Prolonged exposure to high volumes can cause hearing damage.
• It is the responsibility of the user to set the audio input level to the recommended volume. See the table on the next page for noise exposure levels.
• DO NOT use this product in situations that require special attention: using noise reduction equipment and listening to audio can reduce awareness of the surrounding environment.

Failure to observe these warnings can result in a risk of fire or electric shock.

• DO NOT use the product if it is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or injury.
• Risk of fire and burns. DO NOT open, crush, heat above specified maximum temperature or incinerate. Prolonged exposure to direct sunlight can result in elevated temperatures.

WARNINGS

• DO NOT immerse in water or other liquids.
• Properly seal the charging port cover to achieve specified water & foreign object ingress protection. Keep the seal free of dirt, oil, sand, or other material that interferes with proper sealing. Failure to do so can result in a risk of fire or electric shock.
• DO NOT open the charging port cover if wet or in a wet environment. Thoroughly dry the unit and the seal around the water-resistant cover completely before opening the water-resistant cover
• DO NOT subject to impacts or drops greater than 9.8 ft. (3 m). Drops larger than this may not show signs of damage, but internal components may have been compromised. It is advisable to replace the unit if any such severe events occur.
• DO NOT attempt to repair the product or charging cable. There are no user-serviceable parts.

FEATURE DETAILS

NOTE : There are no user-serviceable parts inside.

FEATURE DETAILS

1. Charging Case LED Screen
2. “L” & “R” Earbud Charging Indicators
3. Charging Case Cover
4. USB-C Charging Port
5. USB-C Port Cover
6. Charging Case Contacts
7. Capacitive Touch Area (on each earbud)
8. Earbud Microphone (on each earbud)
9. Dual-Color LED (on each earbud)
10. Earbud Charging Contacts (on each earbud)
11. Memory Foam Tips (3 sets)*
12. Silicone Tips (3 sets)*
13. USB-A to USB-C Charging Cable
14. Recommended Volume Instructions (printed inside lid)
15. Case Touch Area

NOTE : Silicone Tips 12 are intended for casual listening only. When hearing protection is required, use the Memory Foam Tips 11.

NOISE REDUCTION RATING (NRR)
The NRR for the AESEB2 ELITE Bluetooth® Jobsite Earbuds is 25dB. It is tested by ANSI S3.19-1974. To ensure adequate hearing protection, the provided memory foam tips must be used with the Bluetooth® Jobsite Earbuds.

ANSI S3.19-1974 TESTING The level of noise entering a person’s ear when the hearing protector is worn as directed is closely approximated by the difference between the A-weighted environmental noise level and the Noise Reduction Rating (NRR).

EXAMPLE:

• The environmental noise level as measured at the ear is 93dB(A).
• The NRR is 25dB.
• The level of noise entering the ear is approximately equal to 68dB(A).

NOISE REDUCTION RATING (NRR)

CAUTION : For noise environments dominated by frequencies below 500 Hz, the C-weighted environmental noise level should be used.

NOTE : Although hearing protectors can be recommended for protection against the harmful effects of impulsive noise, the Noise Reduction Rating (NRR) is based on the attenuation of continuous noise and may not be an accurate indicator of the protection attainable against impulsive noise such as gunfire. The Environmental Protection Agency uses the Noise Reduction Rating (NRR) as a rating of a hearing protector’s noise-reducing performance. Klein Tools cannot guarantee the suitability of the NRR as a method of rating protection as protection relies on the level and exposure of sound and how well a product fits.

AUDIO INPUT LEVEL
The audio level in the hearing protector is dependent on the audio input level. To prevent harmful noise levels, the AESEB2 ELITE Bluetooth® Earbuds automatically default to 85dB when connected to a music device. If the hearing protector is connected to a music device with a high audio output level, it is the user’s responsibility to set the audio input level to a safe level. See the table in the WARNINGS section for noise exposure levels.

OPERATING INSTRUCTIONS

CHARGING THE CASE
Open the USB-C Charging Port Cover 5 and insert the USB-C end of the included charging cable 13 into the USB-C Port 4 of the charging case. Connect the USB-A end of the cable to an appropriate charging source (not included, see GENERAL SPECIFICATIONS section). While the case is charging (0 to 100%) the LED Screen 1 will indicate the charge status in a numerical fashion (e.g. ). The LED Screen 1 can be activated by touching and holding the Capacitive Touch Area 15 for one second.

CHARGING THE EARBUDS
Provided the charging case has been charged, open the charging case cover and place the earbuds in their respective slots. The “R” and “L” Earbud Charging Indicators 2 on the LED Screen 1 will blink, indicating the earbuds are charging.

USING MEMORY FOAM TIPS 11 FOR HEARING PROTECTION

WARNING : Inspect before each use. Damage to the memory foam tip can reduce noise reduction performance.

INSERTING EARBUDS INTO EARS
The AESEB2 comes with three silicone and three memory-foam eartip sets. The silicone eartips are best suited for casual or leisure use. The memory foam eartips must be worn for hearing protection (NRR):

1. Choose the eartip size (S/M/L) that best fits your ear canal and install onto the earbuds (FIG. A). Inspect each tip for dirt and damage before use.
2. With clean hands, roll and compress the memory foam tips along the stem of the earbud (FIG. B).
3. Reach over your head with a free hand to pull your ear up and back and insert the memory foam tip portion of the earbud as deep as possible (FIG. C).
4. Hold the earbud and wait 30 seconds, until the memory foam tips are fully expanded (FIG. D).
5. Rotate the earbud if necessary to make sure the earbuds rest firmly and securely inside the inner ear (FIG. E).
6. Repeat the process for another earbud.

TURNING EARBUDS ON/OFF

• ON : If the earbuds are inside the charging case, opening the Charging Case Cover 3, will automatically power on the earbuds. If the earbuds are not inside the case, touch and hold the Capacitive Touch Area 7 on either earbud for 1.5 seconds.
• OFF : Placing both earbuds into the charging case and closing the cover 3 will automatically power off the earbuds. Alternatively, touch and hold the Capacitive Touch Area 7 on either earbud for 3 seconds.

PAIRING
After successfully powering on, the earbuds will automatically enter Bluetooth® pairing mode. “Pairing” voice prompt will be heard and the Dual- Color LEDs on the earbuds 9 will alternate between flashing Red and Blue every second. To pair with your device:

1. Ensure that Bluetooth is enabled on your device and it has discovered “Klein ELITE Buds” in the pairing list.
2. Select “Klein ELITE Buds” and upon successful connection, the “Connected” voice prompt will be heard, and the Dual-Color LEDs on the earbuds 9 will turn solid blue for three seconds, then turn off.

NOTES:

1. In the event auto pairing fails, power the earbuds off and on again.
2. The earbuds will automatically attempt to connect to the last paired wireless device when turned on but are ready to pair with any compatible device within two minutes of powering on if the last paired device is not detected.

AUTO POWER-OFF
If no Bluetooth device is connected and pairing has failed, the earbuds will automatically power off after 10 minutes.

CONTROLS WHILE LISTENING TO MUSIC

• Play/Pause : Single tap the Capacitive Touch Area 7 on either earbud. Next Track: Double tap the Capacitive Touch Area 7 on the right earbud. Previous Track: Double tap the Capacitive Touch Area 7 on the left earbud. Volume Up: Touch and hold the Capacitive Touch Area 7 on the right earbud. Volume Down: Touch and hold the Capacitive Touch Area 7 on the left earbud.
• NOTE: Volume can only be increased or decreased when music is playing.

CONTROLS DURING PHONE CALLS

• Answer Call: Single-tap the Capacitive Touch Area 7 on either earbud. End Call: Touch and hold the Capacitive Touch Area 7 on either earbud for one second until the call is disconnected.
• Reject Call: Touch and hold the Capacitive Touch Area 7 on either earbud for one second.
• End Current Call and Answer Incoming Call: Single-tap the Capacitive Touch Area 7 on either earbud.
• Hold Current Call and Answer Incoming Calls: Double-tap the Capacitive Touch Area 7 on either earbud.
• Switch Between Two Active Calls: Double-tap the Capacitive Touch Area 7 on either earbud.
• End Current Call and Other Call on Hold: Touch and hold the Capacitive Touch Area 7 on either earbud for one second to end the new call, then touch and hold again to end the initial call.
• Cancel Outgoing Call: Single-tap the Capacitive Touch Area 7 on either earbud.

NOTE : In-call volume is adjustable on the phone only, not via earbud controls.

OTHER FUNCTIONS

• Enter Voice Assistant: Triple-tap the Capacitive Touch Area 7 on either earbud.
• Exit Voice Assistant: Single-tap the Capacitive Touch Area 7 on either earbud.

COMPLIANCE

FCC COMPLIANCE
This device complies with part 15 of the FCC RULES. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. FCC RF EXPOSURE STATEMENTS:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC RF Exposure Guidelines. This device must not be co‐located or operated in conjunction with any other antenna or transmitter.

IC COMPLIANCE
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation of the device.

This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES-003.

IC RADIATION EXPOSURE STATEMENT:
The equipment complies with SAR limits set forth for an uncontrolled environment and meets the RSS-102 of the IC RF Exposure Rules. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

MAINTENANCE

1. CLEANING : Be sure earbuds are turned off and the case is unplugged, and wipe with a clean, dry lint-free cloth. Do not use abrasive cleaners or solvents.
2. STORAGE : If the earbuds are to be left unused for an extended period, charge before storing, and recharge periodically during storage, to maintain the battery’s charging capacity.

WARRANTY
www.kleintools.com/warranty

DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash. Items must be properly disposed of by local regulations. Please see www.epa.gov/recycle for additional information.

CUSTOMER SERVICE
KLEIN TOOLS, INC. 450 Bond Street Lincolnshire, IL 60069 1-800-553-4676 customerservice@kleintools.com www.kleintools.com

References

• cdc.gov/niosh/topics/noise/reducenoiseexposure
• Reduce, Reuse, Recycle | US EPA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>