HIRSCHMANN NB1810 NetModule Router User Manual
- June 15, 2024
- HIRSCHMANN
Table of Contents
NB1810 NetModule Router
NetModule Router NB1810
Specifications
- Product Type: NB1810
- Software Version: 4.8.0.102
- Manual Version: 2.1570
- Manufacturer: NetModule AG
- Location: Switzerland
- Date: November 20, 2023
Product Description
The NetModule Router NB1810 is a versatile device that provides
reliable network connectivity. It is designed to meet the needs of
various applications and is suitable for both commercial and
industrial environments. This user manual covers all variants of
the NB1810 product type.
Open Source Software
A large amount of the source code for this product is available
under free and open-source licenses, such as the GNU General Public
License (GPL). More information about the licenses can be obtained
from www.gnu.org. The remaining
open-source software is usually available under other permissive
licenses. If you require detailed license information for a
specific software package, please contact us.
Trademark Information
All product or company names mentioned in this manual are used
for identification purposes only and may be trademarks or
registered trademarks of their respective owners. The inclusion of
software, hardware, or processes from NetModule or other
third-party providers is subject to their respective license
agreements.
Contact Information
-
Website: https://www.netmodule.com
-
Support: https://support.netmodule.com
-
Address: NetModule AG, Maulbeerstrasse 10, CH-3011 Bern,
Switzerland -
Telephone: +41 31 985 25 10
-
Fax: +41 31 985 25 11
-
Email: info@netmodule.com
User Manual for NRSW version 4.8.0.102
1. Welcome to NetModule
Thank you for purchasing a NetModule product. This document
provides an introduction to the device and its features. The
following chapters will guide you through the device’s
commissioning, installation procedure, and provide helpful
information on configuration and maintenance. For additional
information, such as sample SDK scripts or configuration samples,
please refer to our wiki on https://wiki.netmodule.com.
2. Conformity
This chapter provides general information for putting the router
into operation.
FAQ (Frequently Asked Questions)
-
1. How do I update the software version of the NB1810 router?
To update the software version of the NB1810 router, follow
these steps:
-
1. 1. Download the latest software version from the NetModule
website.
- Access the router’s administration interface.
- Navigate to the “Software Update” section.
- Select the downloaded software file.
- Start the software update process and follow the on-screen
instructions.
-
What are the available antenna port types for the NB1810
router?
The available antenna port types for the NB1810 router are:
-
1. * Cellular antenna port types: Refer to Table 4.1 in the user
manual for detailed information.
- WLAN antenna port types: Refer to Table 4.3 in the user manual
for detailed information.
- WLAN antenna port types: Refer to Table 4.3 in the user manual
-
Where can I find SDK examples for the NB1810 router?
You can find SDK examples for the NB1810 router in the “SDK
Examples” section. Refer to Appendix A.3 in the user manual for
more details.
NetModule Router NB1810
User Manual for Software Version 4.8.0.102
Manual Version 2.1570
NetModule AG, Switzerland November 20, 2023
NetModule Router NB1810
This manual covers all variants of the NB1810 product type.
The specifications and information regarding the products in this manual are
subject to change without notice. We would like to point out that NetModule
makes no representation or warranties with respect to the contents herein and
shall not be responsible for any loss or damage caused to the user by the
direct or indirect use of this information This document may contain
information about third party products or processes. Such third party
information is generally out of influence of NetModule and therefore NetModule
shall not be responsible for the correctness or legitimacy of this
information. Users must take full responsibility for their application of any
products.
Copyright ©2023 NetModule AG, Switzerland All rights reserved
This document contains proprietary information of NetModule. No parts of the
work described herein may be reproduced. Reverse engineering of the hardware
or software is prohibited and protected by patent law. This material or any
portion of it may not be copied in any form or by any means, stored in a
retrieval system, adopted or transmitted in any form or by any means
(electronic, mechanical, photographic, graphic, optic or otherwise), or
translated in any language or computer language without the prior written
permission of NetModule.
A large amount of the source code to this product is available under licenses
which are both free and open source. Most of it is covered by the GNU General
Public License which can be obtained from www.gnu.org. The remainder of the
open source software which is not under the GPL, is usually available under
one of a variety of more permissive licenses. A detailed license information
for a particular software package can be provided on request.
All other products or company names mentioned herein are used for
identification purposes only and may be trademarks or registered trademarks of
their respective owners. The following description of software, hardware or
process of NetModule or other third party provider may be included with your
product and will be subject to the software, hardware or other license
agreements.
Contact
https://support.netmodule.com
NetModule AG Maulbeerstrasse 10 CH-3011 Bern Switzerland
Tel +41 31 985 25 10 Fax +41 31 985 25 11 info@netmodule.com https://www.netmodule.com
NB1810
2
User Manual for NRSW version 4.8.0.102
Contents
1. Welcome to NetModule . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 9 2. Conformity . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.1. Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 10 2.2. Declaration of Conformity . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 13 2.3. Waste Disposal . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.4. National Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 16 2.5. Open Source Software . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 16 3. Specifications . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.1. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 17 3.2. Features . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 17 3.3. Environmental
Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18 3.4. Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 19
3.4.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 19 3.5. Operating Elements . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 21
3.5.1. Ethernet 1/2 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 22 3.5.2. Ethernet 3-6 LEDs . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 22 3.5.3. Reset . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 3.5.4. Mobile . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3.5.5. WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 24 3.5.6. GNSS . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 25 3.5.7. USB 2.0 Host Port . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . 25 3.5.8. RJ45 Ethernet
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3.5.9. SFP Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 27 3.5.10. Power Supply . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 28 3.5.11. Serial Interface . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 3.5.12. 5 Pin
Terminal Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 30 3.5.13. Extension Slots . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 31 4. Installation . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . 33 4.1. Installation of
Micro-SIM Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 33 4.2. Installation of the microSD . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 34 4.3. Installation of the Cellular Antenna . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . 34 4.4. Installation of
the WLAN Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35 4.5. Installation of the GNSS Antenna . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 36 4.6. Installation of the Local Area Network . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 36 4.7. Installation of the SFP
Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 4.8.
Installation of the Power Supply . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 36 4.9. Installation of the Audio Interface . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 37 5. Configuration . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
5.1. First Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 38 5.1.1. Initial Access . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 38 5.1.2. Automatic Mobile Data
Connection . . . . . . . . . . . . . . . . . . . . . . . . . 39 5.1.3.
Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 40 5.2. HOME . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 41 5.3. INTERFACES . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 5.3.1. WAN . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
5.3.2. Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 50 5.3.3. Mobile . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 61 5.3.4. WLAN . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
NB1810
3
User Manual for NRSW version 4.8.0.102
5.3.5. Software Bridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 5.3.6. USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 5.3.7. Serial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 5.3.8. GNSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 5.4. ROUTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 5.4.1. Static Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 5.4.2. Extended Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 5.4.3. Multipath Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 5.4.4. Multicast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 5.4.5. BGP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 5.4.6. OSPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 5.4.7. Mobile IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 5.4.8. Quality Of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 5.5. FIREWALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 5.5.1. Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 5.5.2. Adress/Port Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 5.5.3. Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 5.5.4. NAPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 5.6. VPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 5.6.1. OpenVPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 5.6.2. IPsec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 5.6.3. PPTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 5.6.4. GRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 5.6.5. L2TP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 5.6.6. Dial-In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 5.7. SERVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 5.7.1. SDK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 5.7.2. DHCP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 5.7.3. DNS Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 5.7.4. NTP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 5.7.5. Dynamic DNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 5.7.6. E-Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 5.7.7. Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 5.7.8. SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 5.7.9. SSH/Telnet Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 5.7.10. SNMP Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 5.7.11. Let’s Encrypt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 5.7.12. Web Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 5.7.13. MQTT Broker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 5.7.14. Softflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 5.7.15. Discovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 5.7.16. Redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 5.7.17. ITxPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 5.7.18. Voice Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 5.7.19. Access Controller WLAN-AP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 5.8. SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 5.8.1. System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 5.8.2. Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 5.8.3. Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
NB1810
4
User Manual for NRSW version 4.8.0.102
5.8.4. Module Firmware Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 5.8.5. Software Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 5.8.6. Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 5.8.7. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 5.8.8. Keys and Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 5.8.9. Licensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 5.8.10. Legal Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 5.9. LOGOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 6. Command Line Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 6.1. General Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 6.2. Print Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 6.3. Getting Config Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 6.4. Setting Config Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 6.5. Checking Config Completed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 6.6. Getting Status Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 6.7. Scanning Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 6.8. Sending E-Mail or SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 6.9. Updating System Facilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 6.10. Manage keys and certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 6.11. Restarting Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 6.12. Debug System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 6.13. Resetting System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 6.14. Rebooting System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 6.15. Running Shell Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 6.16. Working with History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 6.17. CLI-PHP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 A. Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 A.1. Abbrevations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 A.2. System Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 A.3. Factory Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 A.4. SNMP VENDOR MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 A.5. SDK Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
NB1810
5
User Manual for NRSW version 4.8.0.102
List of Figures
5.1. Initial Login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 39 5.2. Home . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . 41 5.3. Status of the PoE
power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
5.4. WAN Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 44 5.5. Link Supervision . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 47 5.6. WAN Settings . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
5.7. Ethernet Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 50 5.8. Ethernet Link Settings . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 51 5.9. Authentication via
IEEE 802.1X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
5.10. PoE Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 54 5.11. VLAN Management . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 55 5.12. LAN IP Configuration . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 5.13.
LAN IP Configuration – LAN Interface . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 57 5.14. LAN IP Configuration – WAN Interface . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 58 5.15. SIMs . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 5.16.
eSIM Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 64 5.17. Add eUICC Profile . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 65 5.18. WWAN Interfaces . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 5.19.
WLAN Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 69 5.20. WLAN Configuration . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 74 5.21. WLAN IP Configuration . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 5.22. USB
Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 81 5.23. USB Device Management . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 82 5.24. Serial Port Administration . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 5.25. Serial
Port Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 85 5.26. Static Routing . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 91 5.27. Extended Routing . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 5.28.
Multipath Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 94 5.29. Mobile IP . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 102 5.30. Firewall Groups . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
5.31. Firewall Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 106 5.32. Masquerading . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 108 5.33. Inbound NAPT . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
109 5.34. OpenVPN Administration . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 111 5.35. OpenVPN Configuration . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 112 5.36. OpenVPN Client
Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
5.37. IPsec Administration . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 118 5.38. IPsec Configuration . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 119 5.39. PPTP
Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 123 5.40. PPTP Tunnel Configuration . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 124 5.41. PPTP Client Management . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 5.42. Dial-in
Server Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 128 5.43. SDK Administration . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 134 5.44. SDK Jobs . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 5.45. DHCP
Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 139 5.46. DNS Server . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 142 5.47. NTP Server . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
NB1810
6
User Manual for NRSW version 4.8.0.102
5.48. Dynamic DNS Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 5.49. E-Mail Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 5.50. SMS Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 5.51. SSH and Telnet Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 5.52. SNMP Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 5.53. Web Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 5.54. VRRP Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 5.55. ITxPT configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 5.56. ITxPT FMStoIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 5.57. ITxPT GNSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 5.58. ITxPT Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 5.59. ITxPT VEHICLEtoIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 5.60. Voice Gateway Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 5.61. AC WLAN-AP Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 5.62. AC WLAN-AP Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184 5.63. AC WLAN-AP Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 5.64. System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 5.65. Regional settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 5.66. User Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 5.67. Remote Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 5.68. Manual File Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 5.69. Automatic File Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 5.70. Factory Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 5.71. Log Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 5.72. Tech Support File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 5.73. Keys and certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 5.74. Certificate Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 5.75. Licensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
NB1810
7
User Manual for NRSW version 4.8.0.102
List of Tables
3.1. Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 18 3.2. NB1810 Interfaces . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 20 3.3. NB1810 Status Indicators .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 3.4.
Ethernet Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 22 3.5. Ethernet Status Indicators . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 22 3.6. Mobile Antenna Port
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3.7. IEEE 802.11 Standards . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 24 3.8. WLAN Antenna Port Specification . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 24 3.9. GNSS Specifications option G . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 3.10. GNSS / GPS
Antenna Port Specification . . . . . . . . . . . . . . . . . . . . . . . . .
25 3.11. USB 2.0 Host Port Specification . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 25 3.12. Ethernet Port Specification . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 26 3.13. Pin Assignments of RJ45
Ethernet Connectors . . . . . . . . . . . . . . . . . . . . . . 26 3.14. SFP
Port Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 27 3.15. Power Specifications . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 28 3.16. Power Specifications . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 3.17.
RS-232 Port Specification . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 29 3.18. RS-485 Port Specification . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 30 3.19. Terminal block connector . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 3.20. Pin
Assignments of Terminal Block . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 30 3.21. Ethernet Port Specification . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 31 3.22. Ethernet Port Specification . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 3.23. Pin
Assignments of RJ45 Ethernet Connectors . . . . . . . . . . . . . . . . . . .
. . . 32
4.1. Cellular antenna port types . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 34 4.2. Variant with 5G module, antenna assignment . . . .
. . . . . . . . . . . . . . . . . . . 34 4.3. WLAN antenna port types . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.26. IEEE 802.11 Network Standards . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 71 5.53. Static Route Flags . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 92 5.101. SMS Control Commands . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 5.115. SMS
Number Expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 152 5.184. Certificate Sections . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 208 5.185. Certificate Operations . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
A.1. Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 229 A.2. Systemereignisse . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 231 A.3. SDK Examples . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
NB1810
8
User Manual for NRSW version 4.8.0.102
1. Welcome to NetModule
Thank you for purchasing a NetModule product. This document should give you an
introduction to the device and its features. The following chapters describe
any aspects of commissioning the device, installation procedure and provide
helpful information towards configuration and maintenance. Please find further
information such as sample SDK scripts or configuration samples in our wiki on
https://wiki.netmodule.com.
NB1810
9
User Manual for NRSW version 4.8.0.102
2. Conformity
This chapter provides general information for putting the router into
operation.
2.1. Safety Instructions
Please carefully observe all safety instructions in the manual that are marked
with the symbol .
Compliance information: The NetModule routers must be used in compliance with
any and all applicable national and international laws and with any special
restrictions regulating the utilization of the communication module in
prescribed applications and environments.
Information about the accessories / changes to the device: Please only use
original accessories to prevent injuries and health risks. Changes made to
the device or the use of non-authorized accessories will render the
warranty null and void and potentially invalidate the operating license.
NetModule routers must not be opened (SIM cards may be used according to the
instructions).
NB1810
10
User Manual for NRSW version 4.8.0.102
Information about the device interfaces: All systems that are connected to
the NetModule router interfaces must meet the
requirements for SELV (Safety Extra Low Voltage) systems.
Interconnections must not leave the building nor penetrate the body shell of
a vehicle.
Connections for antennas may only exit the building or the vehicle hull if
transient overvoltages (according to IEC 62368-1) are limited by external
protection circuits down to 1 500 Vpeak. All other connections must remain
within the building or the vehicle hull.
Installed antennas must always be at least 40 cm away from people.
All antennas must have a distance of at least 20cm from each other; in the
case of combined antennas (mobile radio / WLAN / GNSS), there must be
sufficient isolation between the radio technologies.
Devices with a WLAN interface may be operated only with applicable
Regulatory Domain configured. Special attention must be paid to country,
number of antennas and the antenna gain (see also chapter 5.3.4). WLAN
antennas with a higher amplification may be used with the NetModule router
“Enhanced-RF-Configuration” software license and the antenna gain and cable
attenuation that have been correctly configured by certified specialized
personnel. A misconfiguration will lead to loss of the approval.
The maximum gain of an antenna (incl. the attenuation of the connection
cables) must not exceed the following values in the corresponding frequency
range:
Mobile radio (600MHz .. 1GHz) < 3.2dBi
Mobile radio (1.7GHz .. 2GHz) < 6.0dBi
Mobile radio (2.5GHz .. 4.2GHz) < 6.0dBi
WiFi (2.4GHz .. 2.5GHz) < 3.2dBi, WiFi (5.1GHz .. 5.9GHz) < 4.5dBi
Note that GNSS signals can be obfuscated or blocked by malicious third-party
devices.
Only CE-compliant power supplies with a current-limited SELV output voltage
range may be used with the NetModule routers.
A Power Source Class 3 (PS3) power supply (with 100 W or more) shall only be
used under the condition that a cable strain relief on the power cable to the
router is applied. Such a cable strain relief ensures that the wires on the
router screw terminal connector are not disconnected (e.g. if under an error
condition, the router would be tangling on the cable). The cable strain relief
must withstand a pulling force of 30 N (for router weight up to 1 kg) resp. 60
N (for router weight up to 4 kg) applied to the cable of the router.
Une alimentation de classe 3 (PS3) (100 W ou plus) ne doit etre utilisee que
si le cable d alimentation du routeur est equipe d un dispositif anti-
traction. A condition qu une decharge de traction soit appliquee au cable d
alimentation du routeur. Une telle decharge de traction permet de s assurer
que les fils du connecteur a vis du routeur ne sient pas deconnectes (par
exemple si, en cas d erreur, le routeur s emmale dans le cable). La decharge
de traction du cable doit resister a une force de traction de 30 N (pour un
routeur d un poids inferieur ou egal a 1 kg) respectivement 60 N (pour un
routeur d un poids inferieur ou egal a 4 kg) appliquee au cable du routeur.
NB1810
11
User Manual for NRSW version 4.8.0.102
FCC Warning: Any Changes or modifications not expressly approved by the
party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference , and
(2) this device must accept any interference received , including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver .
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected .
Consult the dealer or an experienced radio / TV technician for help.
Exposure Requirements: To comply with the FCC RF exposure compliance
requirements, the device must be installed to provide a separation distance of
at least 40 cm from all persons.
NB1810
12
User Manual for NRSW version 4.8.0.102
General safety instructions: Observe the usage limitations of radio units at
filling stations, in chemical plants, in
systems with explosives or potentially explosive locations. The devices may
not be used in airplanes. Exercise particular caution near personal medical
aids, such as pacemakers and hear-
ing aids. The NetModule routers may also cause interference in the nearer
distance of TV sets,
radio receivers and personal computers. Never perform work on the antenna
system during a thunderstorm. The devices are generally designed for normal
indoor use. Do not expose the devices
to extraordinary environmental conditions worse than IP40. Protect them
against aggressive chemical atmospheres and humidity or temperatures
outside specifications. We highly recommended creating a copy of a working
system configuration. It can be
easily applied to a newer software release afterwards.
2.2. Declaration of Conformity
NetModule hereby declares that under our own responsibility that the routers
comply with the relevant standards following the provisions of the RED
Directive 2014/53/EU. The signed version of the Declaration of Conformity can
be obtained from https://www.netmodule.com/downloads
Operating frequency bands and related maximum radio frequency power
transmitted is shown below, according to RED Directive 2014/53/EU, Article 10
(8a, 8b).
WLAN maximum output power
IEE 802.11b/g/n Operation frequency range: 2412-2472 MHz (13 channels) Maximum
output power: 14.93 dBm EIRP average (on antenna port)
IEE 802.11a/n/ac Operation frequency range: 5180-5350 MHz / 5470-5700 MHz (19
channels) Maximum output power: 22.91 dBm EIRP average (on antenna port)
Cellular maximum output power
WCDMA Band I Operation frequency range: 1920-1980, 2110-2170 MHz Maximum
output power: 25.7 dBm rated
NB1810
13
User Manual for NRSW version 4.8.0.102
WCDMA Band III Operation frequency range: 1710-1785, 1805-1880 MHz Maximum
output power: 25.7 dBm rated
WCDMA Band VIII Operation frequency range: 880-915, 925-960 MHz Maximum output
power: 25.7 dBm rated
LTE FDD Band 1 Operation frequency range: 1920-1980, 2110-2170 MHz Maximum
output power: 25 dBm rated
LTE FDD Band 3 Operation frequency range: 1710-1785, 1805-1880 MHz Maximum
output power: 25 dBm rated
LTE FDD Band 7 Operation frequency range: 2500-2570, 2620-2690 MHz Maximum
output power: 25 dBm rated
LTE FDD Band 8 Operation frequency range: 880-915, 925-960 MHz Maximum output
power: 25 dBm rated
LTE FDD Band 20 Operation frequency range: 832-862, 791-821 MHz Maximum output
power: 25 dBm rated
LTE FDD Band 28 Operation frequency range: 703-748, 758-803 Maximum output
power: 25 dBm rated
LTE FDD Band 38 Operation frequency range: 2570-2620 MHz Maximum output power:
25 dBm rated
LTE FDD Band 40 Operation frequency range: 2300-2400 MHz Maximum output power:
25 dBm rated
5G NR Band 1 Operation frequency range: 1920-1980, 2110-2170 MHz Maximum
output power: 25 dBm rated
5G NR Band 3 Operation frequency range: 1710-1785, 1805-1880 MHz Maximum
output power: 25 dBm rated
NB1810
14
User Manual for NRSW version 4.8.0.102
5G NR Band 7 Operation frequency range: 2500-2570, 2620-2690 MHz Maximum
output power: 25 dBm rated
5G NR Band 8 Operation frequency range: 880-915, 925-960 MHz Maximum output
power: 25 dBm rated
5G NR Band 20 Operation frequency range: 832-862, 791-821 MHz Maximum output
power: 25 dBm rated
5G NR Band 28 Operation frequency range: 703-748, 758-803 MHz Maximum output
power: 25 dBm rated
5G NR Band 38 Operation frequency range: 2570-2620 MHz Maximum output power:
25 dBm rated
5G NR Band 40 Operation frequency range: 2300-2400 MHz Maximum output power:
25 dBm rated
5G NR Band 77 Operation frequency range: 3300-4200 MHz Maximum output power:
25 dBm rated
5G NR Band 78 Operation frequency range: 3300-3800 MHz Maximum output power:
25 dBm rated
2.3. Waste Disposal
In accordance with the requirements of the Council Directive 2012/19/EU
regarding Waste Electrical and Electronic Equipment (WEEE), you are urged to
ensure that this product will be segregated from other waste at end-of-life
and delivered to the WEEE collection system in your country for proper
recycling.
NB1810
15
User Manual for NRSW version 4.8.0.102
2.4. National Restrictions
This product may be generally used in all EU countries (and other countries
following the RED Directive 2014/53/EU) without any limitation. Please refer
to our WLAN Regulatory Database for getting further national radio interface
regulations and requirements for a particular country.
2.5. Open Source Software
We inform you that NetModule products may contain in part open-source
software. We are distributing such open-source software to you under the terms
of GNU General Public License (GPL)1, GNU Lesser General Public License
(LGPL)2 or other open-source licenses3. These licenses allow you to run, copy,
distribute, study, change and improve any software covered by GPL, Lesser GPL,
or other open-source licenses without any restrictions from us or our end user
license agreement on what you may do with that software. Unless required by
applicable law or agreed to in writing, software distributed under open-source
licenses is distributed on an “AS IS” basis, WITHOUT WARRANTIES OR CONDITIONS
OF ANY KIND, either express or implied. To obtain the corresponding open
source codes covered by these licenses, please contact our technical support
at router@support.netmodule.com.
Acknowledgements
This product includes: PHP, freely available from http://www.php.net
Software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org) Cryptographic software written by Eric Young
(eay@cryptsoft.com) Software written by Tim Hudson (tjh@cryptsoft.com)
Software written Jean-loup Gailly and Mark Adler MD5 Message-Digest
Algorithm by RSA Data Security, Inc. An implementation of the AES encryption
algorithm based on code released by Dr Brian Gladman Multiple-precision
arithmetic code originally written by David Ireland Software from The
FreeBSD Project (http://www.freebsd.org)
1Please find the GPL text under http://www.gnu.org/licenses/gpl-2.0.txt 2Please find the LGPL text under http://www.gnu.org/licenses/lgpl.txt 3Please find the license texts of OSI licenses (ISC License, MIT License, PHP License v3.0, zlib License) under
NB1810
16
User Manual for NRSW version 4.8.0.102
3. Specifications
3.1. Appearance
3.2. Features
All models of NB1810 have following standard functionalities: Power input
(non-isolated) 2x Ethernet ports (10/100/1000 Mbit/s) 1x SFP port 1x
serial port (RS-232/RS-485) 1x USB 2.0 host port 2x micro SIM card slots
1x microSD card slot 2x Extension slots Full featured router software
The NB1810 can be equipped with the following options: 5G, LTE, UMTS, GSM
WLAN IEEE 802.11 GPS/GNSS 4 port GBit Ethernet Switch 4 port GBit
Ethernet Switch with PoE+ Software Keys
Due to its modular approach, the NB1810 router and its hardware components can
be arbitrarily as-
NB1810
17
User Manual for NRSW version 4.8.0.102
sembled according to its indented usage or application. Please contact us in case of special project requirements.
3.3. Environmental Conditions
Parameter Standard Input Voltage Input Voltage with option Ep
Operating Temperature Range
Storage Temperature Range Humidity Altitude Over-Voltage Category Pollution
Degree Ingress Protection Rating
Rating
12 VDC to 48 VDC (-25% / +10%)
48 VDC (±10%)
standard:
-40 C to +70 C
Option Ep (60W): -40 C to +50 C
Option Ep (45W): -40 C to +55 C
Option Ep (30W): -40 C to +60 C
Option Ep (15W): -40 C to +65 C
-40 C to +85 C
0 to 95% (non-condensing)
up to 4000m
I
2
IP40 (with SIM and USB covers mounted)
Table 3.1.: Operating Conditions
NB1810
18
User Manual for NRSW version 4.8.0.102
3.4. Interfaces
3.4.1. Overview
NB1810
19
User Manual for NRSW version 4.8.0.102
Nr. Label 1 LED Indicators 2 SD 3 Reset 4 SIM 1 / 2
5 USB 6 EXT 1 7 EXT 2 8 ETH 1-6
9 MOB 2/WLAN 1
10 EXT
11 MOB 1/WLAN 2
12 GNSS 13 PWR 14 RS-232/RS-485
15 SFP
Panel Front Front Front Front
Front Front Front Front/ Bottom Top
Top
Top
Top Bottom Bottom
Bottom
Function LED Indicators for the different interfaces microSD card Reboot and
factory reset button Micro SIM 1/2 (3FF), they can be assigned dynamically to
any modem by configuration. USB 2.0 host port Extension EXT1 Extension EXT2
Ethernet ports, can be used for LAN/WAN
2 SMA female connectors for MIMO WLAN or MIMO cellular antenna 2 SMA female
connectors for additional antennas e.g. WLAN for variants with 5G 2 SMA female
connectors for MIMO WLAN or MIMO cellular antenna 1 SMA female connector for
additional GNSS antenna Power supply 12-48 VDC (Pins 1 and 2) Non-isolated
serial RS-232/RS-485 interface (Pins 3 to 5) which can be used for console
administration, serial device server or other serial based communication
applications. SFP port, can be used for LAN/WAN
Table 3.2.: NB1810 Interfaces
NB1810
20
User Manual for NRSW version 4.8.0.102
3.5. Operating Elements
The following table describes the default NB1810 status indicators.
Label STAT WAN LAN VPN EXT
SYS
Color g
g g g g
g g gyr
State Blinking
On On Blinking Off On
Off On Blinking Off Off On/ Blinking
Function
Device busy; device is in startup, software- or configuration update.
The device is ready.
The hotlink connection is up.
The hotlink connection is establishing or changing the interface.
The hotlink is disabled.
A WLAN access-point or ETH LAN-connection is up. ETH: enabled as LAN and link
status is up WLAN: WLAN enabled and configured as access-point.
No WLAN or ETH LAN-connection is up.
VPN connection is up.
VPN is up and waiting for a connection.
VPN connection down.
Extension is disabled.
The EXT LED indicates the state of the extension interfaces: GNSS (default),
DIO, CAN, Serial, BLE, … or user specific (control via SDK or container) The
configuration is done in the UI LED settings. Optional: the signal strength of
wireless interfaces could be indicated (LTE, WiFi, BLE, ..).
Shows the overall system state. This could be derived from health indicators
such as:
all services up and running overall throughput is normal CPU load is
normal the supervisor … User application (state set by user in SDK or
container)
g
On System operation state: normal
g
Blinking System operation state: during startup
r
On System operation state: emergency, watchdog, failure
Table 3.3.: NB1810 Status Indicators
NB1810
21
User Manual for NRSW version 4.8.0.102
3.5.1. Ethernet 1/2 LEDs The following table describes the Ethernet status indicators.
Label S
L/A
Color
State 1 blink 2 blinks 3 blinks
off on blinking off
Function 10 Mbit/s 100 Mbit/s 1000 Mbit/s no Link Link on Activity no Link
Table 3.4.: Ethernet Status Indicators
3.5.2. Ethernet 3-6 LEDs The following table describes the Ethernet status indicators.
Label S
L/A
Color
State on
blinking off on
blinking off
Function 1000 Mbit/s 100 Mbit/s no Link or 10 Mbit/s Link on Activity no Link
Table 3.5.: Ethernet Status Indicators
3.5.3. Reset
The reset button has two functions: 1. Reboot the system: Press at least 3
seconds to trigger a system reboot. The reboot is indicated with the red
blinking STAT LED. 2. Factory reset: Press at least 10 seconds to trigger a
factory reset. The start of the factory reset is confirmed by all LEDs
lighting up for a second.
NB1810
22
User Manual for NRSW version 4.8.0.102
3.5.4. Mobile
The various variants of the NB1810 support up to 2 WWAN modules for mobile
communication. The LTE modules support 2×2 MIMO. The Variant with 5G supports
up to 1 WWAN modules with 4×4 MIMO. Here you will find an overview of the
different modems and the individual bands
The mobile antenna ports have the following specification:
Feature
Specification
Max. allowed cable length
30 m
Min. number of antennas 4G-LTE
2
Min. number of antennas 5G
4
Max. allowed antenna gain including cable attenuation
Mobile radio (600MHz .. 1GHz) < 3.2dBi Mobile radio (1.7GHz .. 2GHz) < 6.0dBi Mobile radio (2.5GHz .. 4.2GHz) < 6.0dBi
Min. distance between collocated radio transmitter antennas
20 cm
Min. distance between people and an- 40 cm tennas
Connector type
SMA
Table 3.6.: Mobile Antenna Port Specification
NB1810
23
User Manual for NRSW version 4.8.0.102
3.5.5. WLAN The variants of the NB1810supports up to 3 802.11 a/b/g/n/ac WLAN modules.
Standard 802.11a 802.11b 802.11g 802.11n 802.11ac
Frequencies 5 GHz 2.4 GHz 2.4 GHz 2.4/5 GHz 5 GHz
Bandwidth 20 MHz 20 MHz 20 MHz 20/40 MHz 20/40/80 MHz
Max. Data Rate 54 Mbit/s 11 Mbit/s 54 Mbit/s 300 Mbit/s 867 Mbit/s
Table 3.7.: IEEE 802.11 Standards
Note: 802.11n and 802.11ac support 2×2 MIMO The WLAN antenna ports have the following specification:
Feature
Specification
Max. allowed cable length
30 m
Max. allowed antenna gain including cable attenuation
3.2dBi (2,4GHz) resp. 4.5dBi (5GHz)1
Min. distance between collocated ra- 20 cm dio transmitter antennas (Example: WLAN1 to MOB1)
Min. distance between people and an- 40 cm tenna
Connector type
SMA
Table 3.8.: WLAN Antenna Port Specification
1Note: WLAN antennas with a higher amplification may be used with the NetModule router “Enhanced-RF-Configuration” software license and the antenna gain and cable attenuation that have been correctly configured by certified specialized personnel.
NB1810
24
User Manual for NRSW version 4.8.0.102
3.5.6. GNSS
Feature Systems Data stream Tracking sensitivity Supported antennas
Specification BeiDou, Galileo, GLONASS, GPS JSON or NMEA up to -161 dBm Active and passive
Table 3.9.: GNSS Specifications option G
The GNSS antenna port have the following specification:
Feature
Specification
Max. allowed cable length
30 m
Antenna LNA gain
15-20 dB typ, 30 dB max.
Min. distance between collocated ra- 20 cm dio transmitter antennas (Example: GNSS to MOB1)
Connector type
SMA
Table 3.10.: GNSS / GPS Antenna Port Specification
3.5.7. USB 2.0 Host Port The USB 2.0 host port has the following specification:
Feature Speed Current Max. cable length Cable shield Connector type
Specification Low, Full & Hi-Speed max. 500 mA 3m mandatory Type A
Table 3.11.: USB 2.0 Host Port Specification
NB1810
25
User Manual for NRSW version 4.8.0.102
3.5.8. RJ45 Ethernet Connectors
Specification The Ethernet ports have following specification:
Feature Isolation to enclosure Speed Mode Crossover Max. cable length Cable type Cable shield Connector type
Specification 1500 VDC 10/100/1000 Mbit/s Half- & Full-Duplex Automatic MDI/MDI-X 100 m CAT5e or better mandatory RJ45
Table 3.12.: Ethernet Port Specification
Pin Assignment
Pin
Gbit
Fast Ethernet
1
M0+
TX+
2
M0-
TX-
3
M1+
RX+
4
M2+
5
M2-
6
M1-
RX-
7
M3+
8
M3-
Table 3.13.: Pin Assignments of RJ45 Ethernet Connectors
NB1810
26
User Manual for NRSW version 4.8.0.102
3.5.9. SFP Port
Specification The SFP port have following specification:
Feature SFP Specification Laser Module Class Signaling rate (range) Supply voltage Connector type
Specification IEEE802.3 and SFF-8472 Max Class 1 modules allowed 1.25 GBd±100 ppm 3.3 VDC ±10% SFP
Table 3.14.: SFP Port Specification
NB1810
27
User Manual for NRSW version 4.8.0.102
3.5.10. Power Supply
Standard Power Supply specification without option Ep
Feature Power supply nominal voltages Voltage range Avg. power consumption Max. power consumption Max. cable length Cable shield
Specification 12 VDC, 24 VDC, 36 VDC and 48 VDC 12 VDC to 48 VDC (-25% / +10%) 15 W 25 W 30 m not required
Table 3.15.: Power Specifications
Power Supply with Option Ep (4xETH with PoE) The power port in conjunction with the Option Ep (PoE PSE) has the following specification:
Feature Power supply nominal voltages Voltage range Avg. power consumption Max. power consumption Max. cable length Cable shield Galvanic isolation
Specification 48 VDC 48 VDC (±10%) 82 W 90 W 30 m not required just to PoE Supply
Table 3.16.: Power Specifications
For connector type and pin assignment check chapter 3.5.12.
NB1810
28
User Manual for NRSW version 4.8.0.102
3.5.11. Serial Interface
The serial interface is switchable by software.
RS-232 (non-isolated) As default the RS-232 port is available with following
specification:
Feature Protocol Baud rate
Data bits Parity Stop bits Software flow control Hardware flow control
Galvanic isolation Max. cable length Cable shield
Specification 3-wire RS-232 (TXD, RXD, GND) 300, 1 200, 2 400, 4 800, 9 600, 19 200, 38 400, 57 600, 115 200 7 bit, 8 bit none, odd, even 1, 2 none, XON/XOFF none none 10 m not required
Table 3.17.: RS-232 Port Specification
RS-485 (non-isolated) The RS-485 port has the following specification:
Feature Protocol Baud rate
Data bits Parity Stop bits Software flow control Hardware flow control
Galvanic isolation Internal bus termination Max. cable length Cable shield
Cable type
Specification 3-wire RS-485 (GND, A, B) 1 200, 2 400, 4 800, 9 600, 19 200, 38 400, 57 600, 115 200 7 bit, 8 bit none, odd, even 1, 2 none, XON/XOFF none none 120could be added as SW option 10 m not required Twisted Pair
NB1810
29
User Manual for NRSW version 4.8.0.102
Feature Max. transceivers on bus Max. number of nodes
Specification 256 256
Table 3.18.: RS-485 Port Specification
For connector type and pin assignment check chapter 3.5.12.
3.5.12. 5 Pin Terminal Block
Feature Connector type
Specification 5 pin terminal block header 3.5 mm (screw locking)
Table 3.19.: Terminal block connector
Pin Assignment
RS-485 RS-232 PWR
Pin Name Description
1
V+ Power Input
2
VGND Power Ground
3 GND RS-232 GND (non-isolated)
4
RxD RS-232 RxD (non-isolated)
5
TxD RS-232 TxD (non-isolated)
3 GND GND (non-isolated)
4
A RS-485 (RxD/TxD+ non-inverting pin) (non-isolated)
5
B RS-485 (RxD/TxD- inverting pin) (non-isolated)
Table 3.20.: Pin Assignments of Terminal Block
NB1810
30
User Manual for NRSW version 4.8.0.102
3.5.13. Extension Slots
Available Options
The NB1810 has two optional extension slots (EXT 1, EXT 2) for various
interfaces and one RJ45 extension interface (ETH switch with or without PoE+).
The extensions which can be inserted in the EXT1 and EXT2 slots are customer
specific, please contact us. One of the following extension boards can be
inserted in the RJ45 extension:
4-Port Gbit Ethernet Switch (Options E)
4-Port Gbit Ethernet Switch with PoE+ (Power Over Ethernet Supply, Options
Ep)
4-Port Gbit Ethernet Switch Specification (options E and Ep) The 4-port Gbit Ethernet switch (Options E and Ep) has the following specification:
Feature Isolation to enclosure Speed Mode Crossover Max. cable length Cable type Cable shield Connector type
Specification 1500 VDC 10/100/1000 Mbit/s Half- & Full-Duplex Automatic MDI/MDI-X 100 m CAT5e or better mandatory RJ45
Table 3.21.: Ethernet Port Specification
The optional PoE+ Power Source Equipment has the following specification (only option Ep):
Feature Standards
Isolation to enclosure Max. Output Power (per port) Max. Output Power (total)
Specification IEEE802.3af and IEEE802.3at, including twoevent classification 1500 VDC 30 W 60 W
Table 3.22.: Ethernet Port Specification
NB1810
31
User Manual for NRSW version 4.8.0.102
Pin
Gbit
Fast Ethernet
1
M0+
TX+
2
M0-
TX-
3
M1+
RX+
4
M2+
5
M2-
6
M1-
RX-
7
M3+
8
M3-
Table 3.23.: Pin Assignments of RJ45 Ethernet Connectors
NB1810
32
User Manual for NRSW version 4.8.0.102
4. Installation
The NB1810is designed for mounting on a DIN rail. Additional mounting holes
allow the user to change DIN rail adapter orientation 90° rotated vs. default
position. Please consider the safety instructions in chapter 2 and the
environmental conditions in chapter 3.3.
The following precautions must be taken before installing a NB1810 router:
Avoid direct solar radiation Protect the device from humidity, steam and
aggressive fluids Guarantee sufficient circulation of air around the device
The device is for indoor use only
Attention: NetModule routers are not intended for the end consumer market. The
device must be installed and commissioned by a certified expert.
4.1. Installation of Micro-SIM Cards
Up to two Micro-SIM cards can be inserted in a NB1810 router. SIM cards can be
inserted by sliding it into one of the designated slots on the front panel.
You have to push the SIM card using a small paper clip (or similar) until it
snaps into place. To remove the SIM, you will need to push it again in the
same manner. The SIM card will then rebounce and can be pulled out. SIMs can
be assigned flexibly to any modem in the system. It is also possible to switch
a SIM to a different modem during operation, for instance if you want to use
another provider upon a certain condition. However, a SIM switch usually takes
about 10-20 seconds which can be bypassed (e.g. at boot-up) if SIMs are
installed reasonably. Using only a single SIM with one modem, it should be
preferably placed into the SIM 1 holder. For systems which should operate two
modems with two SIMs in parallel, we recommend to assign MOB 1 to SIM 1, MOB 2
to SIM 2. Further information about SIM configuration can be found in chapter
5.3.3.
Attention: After a SIM Switch the SIM Cover of the NB1810 router has to be
mounted again and screwed to get IP40 protection class.
NB1810
33
User Manual for NRSW version 4.8.0.102
4.2. Installation of the microSD
Up to one card can be inserted in a NB1810 router. This card is accessed using
SPI mode. Therefore the card has to support SPI mode. Following cards will
work:
SanDisk Kingston Swissbit Transcend
4.3. Installation of the Cellular Antenna
For a reliable function of the NetModule router via the mobile network, the
NetModule routers require a good signal. Use suitable remote antennas with
extended cables to achieve an optimal location with a sufficient signal and to
maintain the distances to other antennas (at least 20cm to each other). The
antenna manufacturer’s instructions must be observed. Keep in mind that
effects caused by Faraday cages such as large metal surfaces (elevators,
machine housings, etc.), close meshed iron constructions and others may reduce
signal reception significantly. The mounted antennas or antenna cables should
be fixed with a wrench. The following table shows how to connect the cellular
antennas. 4G-LTE antennas require both the main and auxiliary ports to be
connected.
Antenna Port MOB 1 A1 MOB 1 A2 MOB 2 A3 MOB 2 A4
Type Main Auxiliary Main Auxiliary
Table 4.1.: Cellular antenna port types
5G requires 4 antennas per module (antenna ports A1-A4). See example in table
4.2.
Attention: When installing the antenna be sure to observe chapter 2
MOB 1
MOB 2
GNSS EXT
Antenna Port
A1 A2
A3 A4
A5 A6 A7
NB1810-NWac4Ep-G 5G Mobile 1 5G Mobile 1 GNSS WLAN 1
Table 4.2.: Variant with 5G module, antenna assignment
NB1810
34
User Manual for NRSW version 4.8.0.102
4.4. Installation of the WLAN Antennas
The following table shows how to connect the WLAN antennas. The number of
attached antennas can be configured in the software. If only one antenna is
used, it must be attached to the main port. However, for better diversity and
thus better throughput and coverage, we highly recommend using two antennas.
Antenna Port WLAN 1 A3 WLAN 1 A4 WLAN 2 A1 WLAN 2 A2
Type Main Auxiliary Main Auxiliary
Table 4.3.: WLAN antenna port types
For variants with 5G cellular module, WLAN 1 is assigned to antenna ports
A6-A7, because 5G cellular is assigned to antenna ports A1-A4. See example in
table 4.2.
Attention: When installing the antenna be sure to observe chapter 2
NB1810
35
User Manual for NRSW version 4.8.0.102
4.5. Installation of the GNSS Antenna
The GNSS antenna must be mounted to the connector GNSS. Whether the antenna is
an active or passive GNSS antenna has to be configured in the software. We
recommend active GNSS antennas for highly accurate GNSS tracking.
Attention: When installing the antenna be sure to observe chapter 2
4.6. Installation of the Local Area Network
Up to two 10/100/1000 Mbit/s Ethernet devices can be directly connected to the
router, further devices can be attached via an additional Ethernet switch.
Please ensure that the connector has been plugged in properly to ETH and
remains in a fixed state, you might otherwise experience sporadic link loss
during operation. The Link/Act LED will lit up as soon as the device has
synced. If not, it might be necessary to configure a different link setting as
described in chapter 5.3.2. By default, the router is configured as a DHCP
server and has the IP address 192.168.1.1.
Attention: Only a shielded Ethernet cable may be used.
4.7. Installation of the SFP Module
The NB1810 router provides one SFP port. Please ensure that the SFP module has
been plugged in properly to SFP and remains in a fixed state.
Attention: Only laser module class 1 are allowed.
4.8. Installation of the Power Supply
The router can be powered with an external source supplying between 12 VDC and
48 VDC. It must be used with a certified (CE or equivalent) power supply,
which must have a limited and SELV circuit output. The router is now ready for
getting engaged.
NB1810
36
User Manual for NRSW version 4.8.0.102
Attention: Following points must be observed: Power supply wires attached to
PWR Inputs (V+ and VGND) must be able to withstand
up to 8A current without heating up significantly or damaging its isolation.
Only CE-compliant power supplies with a current-limited SELV output voltage
range
may be used with the NetModule routers. A Power Source Class 3 (PS3) power
supply (with 100 W or more) shall only be used
under the condition that a cable strain relief on the power cable to the
router is applied. Such a cable strain relief ensures that the wires on the
router screw terminal connector are not disconnected (e.g. if under an error
condition, the router would be tangling on the cable). The cable strain relief
must withstand a pulling force of 30 N (for router weight up to 1 kg) resp. 60
N (for router weight up to 4 kg) applied to the cable of the router. Une
alimentation de classe 3 (PS3) (100 W ou plus) ne doit etre utilisee que si le
cable d alimentation du routeur est equipe d un dispositif anti-traction. A
condition qu une decharge de traction soit appliquee au cable d alimentation
du routeur. Une telle decharge de traction permet de s assurer que les fils du
connecteur a vis du routeur ne sient pas deconnectes (par exemple si, en cas d
erreur, le routeur s emmale dans le cable). La decharge de traction du cable
doit resister a une force de traction de 30 N (pour un routeur d un poids
inferieur ou egal a 1 kg) respectivement 60 N (pour un routeur d un poids
inferieur ou egal a 4 kg) appliquee au cable du routeur.
4.9. Installation of the Audio Interface
The audio interface (line out) is available on the PTT (Option Ap) and the
Audio (Option A) extension.
Attention: Risk of hearing damage: Avoid the use of earphones or Headphones at
high volumes or over one longer period.
NB1810
37
User Manual for NRSW version 4.8.0.102
5. Configuration
The following chapters provide information on setting up the router and
configuring its functions as provided with system software 4.8.0.102.
NetModule provides regularly updated router software with new functions, bug
fixes and closed vulnerabilities. Please keep your router software up to date.
ftp://share.netmodule.com/router/public/system-software/
5.1. First Steps
NetModule routers can be easily set up by using the HTTP-based configuration
interface, called the Web Manager. It is supported by the latest web browsers.
Please ensure to have JavaScript turned on. Any submitted configuration via
the Web Manager will be applied immediately to the system when pressing the
Apply button. When configuring subsystems which require multiple steps (for
instance WLAN) you can use the Continue button to store any settings
temporarily and apply them at a later time. Please note that those settings
will be neglected at logout unless applied. You may also upload configuration
files via SNMP, SSH, HTTP or USB in case you intend to deploy a larger numbers
of routers. Advanced users may also use the Command Line Interface (CLI) and
set configuration parameters directly. The IP address of Ethernet 1 is
192.168.1.1 and DHCP is activated on the interface by default. The following
steps need to be taken to establish your first Web Manager session:
1. Connect the Ethernet port of your computer to the Ethernet 1
(FastEthernet) port of the router using a shielded CAT5 cable with RJ45 (or
M12) connector.
2. If not yet activated, enable DHCP on your computer’s Ethernet interface so
that an IP address can be obtained automatically from the router. This usually
takes a short amount of time until your PC has received the corresponding
parameters (IP address, subnet mask, default gateway, name server). You may
track the progress by having a look to your network control panel and check
whether your PC has correctly retrieved an IP address of the range
192.168.1.100 to 192.168.1.199.
3. Launch your favorite web browser and point it to the IP address of the
router (the URL is http://192.168.1.1).
4. Please follow the instructions of the Web Manager for configuring the
router. Most of the menus are self-explanatory, further details are given in
the following chapters.
5.1.1. Initial Access
In factory state you will be prompted for a new administrator password. Please
choose a password which is both, easy to remember but also robust against
dictionary attacks (such as one that contains numbers, letters and punctuation
characters). The password shall have a minimum length of 6 characters. It
shall contain a minimum of 2 numbers and 2 letters.
NB1810
38
User Manual for NRSW version 4.8.0.102
Admin Password Setup
Please set a password for the admin account. It shall have a minimum length of
6 characters and contain at least 2 numbers and 2 letters.
Username: Enter new password: Confirm new password:
I agree to the terms and conditions
admin
Configure automatic mobile data connection
Apply
NetModule Router Simulator Hostname netbox Software Version 4.4.0.103 © 2004-2020, NetModule AG
NetModule Insights
Subscribe to our mailing and get the latest news about software releases and
much more
Figure 5.1.: Initial Login
Please note that the admin password will be also applied for the root user
which can be used to access the device via the serial console, Telnet, SSH or
to enter the bootloader. You may also configure additional users which will
only be granted to access the summary page or retrieve status information but
not to set any configuration parameters. A set of services (USB Autorun, CLI-
PHP) are by default activated in factory state and will be disabled as soon as
the admin password has been set. They can be enabled again afterwards in the
relevant sections. Other services (SSH, Telnet, Console) can be accessed in
factory state by providing an empty or no password. The passphrase which is
used to store and access generated and uploaded private keys is initialized to
a random value. It can be changed as described in chapter 5.8.8.
5.1.2. Automatic Mobile Data Connection
If you put a SIM with disabled PIN into the first SIM slot and select
‘Configure automatic mobile data connection’ the router will try to select
matching credentials from a database of known providers and
NB1810
39
User Manual for NRSW version 4.8.0.102
esteblish a mobile data connection automatically. This feature is highly
dependent on the SIM card features and the available networks. This Option is
only availble if the router is equipped with a cellular module.
5.1.3. Recovery
Following actions might be taken in case the router has been misconfigured and
cannot be reached anymore:
1. Factory Reset: You can initiate a reset back to factory settings via the
Web Manager, by running the command factory-reset
2. Serial Console Login: It is also possible to log into the system via the
serial port. This requires a terminal emulator (such as PuTTY or
HyperTerminal) and an RS232 connection (115200 8N1) attached to the serial
port of your local computer. You will also see the kernel messages at bootup
there.
3. Recovery Image: In severe cases we can provide a recovery image on demand
which can be loaded into RAM via TFTP and executed. It offers a minimal system
image for running a software update or doing other modifications. You will be
provided with two files, recovery-image and recovery-dtb, which must be placed
in the root directory of a TFTP server (connected via LAN1 and address
192.168.1.254). The recovery image can be launched from the bootloader using a
serial connection. You will have to stop the boot process by pressing s and
enter the bootloader. You can then issue run recovery to load the image and
start the system which can be accessed via HTTP/SSH/Telnet and its IP address
192.168.1.1 afterwards. This procedure can be also initiated by holding the
factory reset button longer than 15 seconds.
NB1810
40
User Manual for NRSW version 4.8.0.102
5.2. HOME
This page provides a status overview of enabled features and connections.
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
Status Summary WAN WWAN WLAN GNSS Ethernet LAN Bridges DHCP OpenVPN IPsec PPTP MobileIP Firewall System
Summary Description LAN2 WWAN1 WLAN1 IPsec1 PPTP1 MobileIP
Administrative Status enabled enabled enabled, access-point enabled enabled, server enabled
Operational Status dialing down up down up down
LOGOUT
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
Figure 5.2.: Home
Summary This page offers a short summary about the administrative and
operational status of the router’s interfaces.
WAN This page offers details about any enabled Wide Area Network (WAN) links
(such as the IP addresses, network information, signal strength, etc.) The
information about the amount of downloaded/uploaded data is stored in non-
volatile memory, thus survive a reboot of the system. The counters can be
reset by pressing the Reset button.
WWAN This page shows information about modems and their network status.
AC This page shows information about the Access Controller (AC) WLAN-AP. This
includes the current states and status information of discovered and managed
AP3400 devices.
NB1810
41
User Manual for NRSW version 4.8.0.102
WLAN The WLAN page offers details about the enabled WLAN interfaces when
operating in access-point mode. This includes the SSID, IP and MAC address and
the currently used frequency and transmit power of the interface as well as
the list of associated stations.
GNSS This page displays the position status values, such as
latitude/longitude, the satellites in view and more details about the used
satellites.
Ethernet This page shows information about the Ethernet interfaces and packet
statistics information. NB1810routers equipped with an optional PoE power
supply will show additional information on the pwer supply status for ports
ETH3 to ETH6:
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
Status Summary WWAN GNSS Ethernet LAN Bridges DHCP DNS System
ETH1
ETH2 / SFP
Description Link state Link speed MAC PoE power PoE detection PoE class PoE consumption PoE voltage PoE current
ETH3
ETH4
ETH5
Value up 1000 Mb/s full duplex 00:11:2B:02:B1:11 good good Class 4 5 W 53.040 V 108.154 mA
LOGOUT ETH6
NB1800 NetModule Router Hostname NB1800 Software Version 4.7.0.100 ©
2004-2022, NetModule AG
Figure 5.3.: Status of the PoE power supply
LAN This page shows information about the LAN interfaces plus the neighborhood
information. Bridges This page shows information about configured virtual
bridge devices.
NB1810
42
User Manual for NRSW version 4.8.0.102
Bluetooth This page shows information about Bluetooth interfaces.
DHCP This page offers details about any activated DHCP service, including a
list of issued DHCP leases.
OpenVPN This page provides information about the OpenVPN tunnel status.
IPSec This page provides information about the IPsec tunnel status.
PPTP This page provides information about the PPTP tunnel status.
GRE This page provides information about the GRE tunnel status.
L2TP This page provides information about the L2TP tunnel status.
MobileIP This page provides information about Mobile IP connections.
Firewall This page offers information about any firewall rules and their
matching statistics. It can be used to debug the firewall.
QoS This page provides information about the used QoS queues.
BGP This page provides information about the Border Gateway Protocol.
OSPF This page provides information about the Open Shortest Path First routing
protocol.
DynDNS This page provides information about Dynamic DNS.
System Status The system status page displays various details of your NB1810
router, including system details, information about mounted modules and
software release information.
SDK This section will list all webpages generated by SDK scripts.
NB1810
43
User Manual for NRSW version 4.8.0.102
5.3. INTERFACES
5.3.1. WAN
Link Management Depending on your hardware model, WAN links can be made up of
either Wireless Wide Area Network (WWAN), Wireless LAN (WLAN), Ethernet or PPP
over Ethernet (PPPoE) connections. Please note that each WAN link has to be
configured and enabled in order to appear on this page.
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
LOGOUT
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
Digital I/O
GNSS
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
WAN Link Management
In case a WAN link goes down, the system will automatically switch over to the
next link in order of priority. A link can be either established when the
switch occurs or permanently to minimize link downtime. Outgoing traffic can
also be distributed over multiple links on a per IP session basis.
Priority Interface 1st LAN2 2nd WWAN1
Operation Mode permanent permanent
Apply
Figure 5.4.: WAN Links
NB1810
44
User Manual for NRSW version 4.8.0.102
In general, a link will be only dialed or declared as up if the following prerequisites are met:
Condition Modem is registered Registered with valid service type Valid SIM state Sufficient signal strength Client is associated Client is authenticated Valid DHCP address retrieved Link is up and holds address Ping check succeeded
WWAN X X X X
X X X
WLAN
X X X X X X
ETH
X X X
PPPoE
X X X
The menu can be used further to prioritize your WAN links. The highest
priority link which has been established successfully will become the so-
called hotlink which holds the default route for outgoing packets.
In case a link goes down, the system will automatically switch over to the
next link in the priority list. You can configure each link to be either
established when the switch occurs or permanently in order to minimize link
downtime.
Parameter 1st priority 2nd priority
3rd priority
4th priority
WAN Link Priorities
The primary link which will be used whenever possible.
The first fallback link, it can be enabled permanently or being dialed as soon
as Link 1 goes down.
The second fallback link, it can be enabled permanently or being dialed as
soon as Link 2 goes down.
The third fallback link, it can be enabled permanently or being dialed as soon
as Link 3 goes down.
Links are being triggered periodically and put to sleep in case it was not
possible to establish them within a certain amount of time. Hence it might
happen that permanent links will be dialed in background and replace links
with lower priority again as soon as they got established. In case of
interfering links sharing the same resources (for instance in dual-SIM
operation) you may define a switch-back interval after which an active hotlink
is forced to go down in order to let the higher-prio link getting dialed
again.
We recommend to use the permanent operation mode for WAN links in general.
However, in case of time-limited mobile tariffs for instance, the switchover
mode might be applicable. By using the distributed mode, it is possible to
distribute outgoing traffic over multiple WAN links based on their weight
ratio.
NB1810
45
User Manual for NRSW version 4.8.0.102
Attention: You can have concurrent WWAN links which share a common resource like one WWAN module using SIM cards of different providers. In that case it would not be possible to find out if the link with the higher priority is available without putting down the low priority link. Therefore, such a link will behave like a switchover, even if configured as permanent.
For mobile links, it is further possible to pass through the WAN address towards a local host (also called Drop-In or IP Pass-through). In particular, the first DHCP client will receive the public IP address. More or less, the system acts like a modem in such case which can be helpful in case of firewall issues. Once established, the Web Manager can be reached over port 8080 using the WAN address but still over the LAN1 interface using port 80.
Parameter disabled permanent on switchover
distributed
WAN Link Operation Modes Link is disabled Link is being established permanently Link is being established on switchover, it will be dialed if previous links failed Link is member of a load distribution group
Parameter Operation mode Weight Switch-back
Bridge Mode Bridging interface
WAN Link Settings The operation mode of the link The weight ratio of a distributed link Specifies the switch-back condition of a switchover link and the time after an active hotlink will be teared down If WLAN client, specifies the bridge mode which will be used. If WLAN client, the LAN interface to which the WAN link should be bridged.
The following bridge modes can be configured for a WLAN client:
Parameter disabled 4addr frame1 pseudo bridge
Bridge modes Disables the bridge mode Enables the 4 address frame format Enables a bridge like behavior by relaying DHCP and broadcast messages
NetModule routers provide a feature called IP pass-through (aka Drop-In mode).
If enabled, the WAN
1This options requires an access point with four address frame format support.
NB1810
46
User Manual for NRSW version 4.8.0.102
address will be be passed-through to the first DHCP client of the specified LAN interface. As Ethernetbased communication requires additional addresses, we pick an appropriate subnet to talk to the LAN host. In case this overlaps with other addresses of your WAN network, you may optionally specify the network given by your provider to avoid any address conflicts.
Parameter IP Pass-through Interface WAN network WAN netmask
IP Pass-Through Settings Enables or disables IP pass-through Specifies the interface on which the address shall be passed-through Specifies the WAN network Specifies the WAN netmask
Supervision
Network outage detection on a per-link basis can be performed by sending pings
on each link to some authoritative hosts. A link will be declared as down in
case all trials have failed and only as up if at least one host can be
reached.
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
LOGOUT
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
Digital I/O
GNSS
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
Link Supervision
Network outage detection can be performed by sending pings on each WAN link to authoritative hosts. The link will be declared as down in case all trials failed. You may further specify an emergency action if a certain downtime is reached.
Link
Hosts
Emergency Action
ANY
8.8.8.8, 8.8.4.4
none
Figure 5.5.: Link Supervision
NB1810
47
User Manual for NRSW version 4.8.0.102
Parameter Link Mode
Primary host Secondary host Ping timeout
Ping interval Retry interval Max. number of failed trials Emergency action
Supervision Settings
The WAN link to be monitored (can be ANY)
Specifies whether the link shall only be monitored if being up (e.g. for using
a VPN tunnel) or if connectivity shall be also validated at connection
establishment (default)
The primary host to be monitored
The secondary host to be monitored (optional)
The amount of time in milliseconds a response for a single ping can take,
consider to increase this value in case of slow and tardy links (such as 2G
connections)
The interval in seconds at which pings are transmitted on each interface
The interval in seconds at which pings are re-transmitted in case a first ping
failed
The maximum number of failed ping trials until the link will be declared as
down
The emergency action which should be taken after a maximum downtime has been
reached. Using reboot would perform a reboot of the system, restart link
services will restart all link-related applications including a reset of the
modem.
WAN Settings
This page can be used to configure WAN specific settings like the Maximum
Segment Size (MSS). The MSS corresponds to the largest amount of data (in
bytes) that the router can handle in a single, unfragmented TCP segment. In
order to avoid any negative side effects, the number of bytes in the data
segment and the headers must not add up to more than the number of bytes in
the Maximum Transmission Unit (MTU). The MTU can be configured per each
interface and corresponds to the largest packet size that can be transmitted.
NB1810
48
User Manual for NRSW version 4.8.0.102
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
LOGOUT
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
Digital I/O
GNSS
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
TCP Maximum Segment Size
The maximum segment size defines the largest amount of data of TCP packets (usually MTU minus 40). You may decrease the value in case of fragmentation issues or link-based limits.
MSS adjustment: Maximum segment size:
enabled disabled
1380
Apply
Figure 5.6.: WAN Settings
Parameter MSS adjustment Maximum segment size
TCP MSS Settings Enable or disable MSS adjustment on WAN interfaces. Maximum number of bytes in a TCP data segment.
NB1810
49
User Manual for NRSW version 4.8.0.102
5.3.2. Ethernet
NB1810 routers ship with 2 dedicated Gigabit Ethernet ports (ETH1 and ETH2)
which can be linked via RJ45 connectors. ETH1 usually forms the LAN1 interface
which should be used for LAN purposes. Other interfaces can be used to connect
other LAN segments or for configuring a WAN link. The LAN10 interface will be
available as soon as a pre-configured USB Ethernet device has been plugged in.
Ethernet Port Assignment
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
Digital I/O
GNSS
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
Port Assignment
Link Settings
Ethernet 1 Administrative status: Network interface:
Ethernet 2 Administrative status: Network interface:
enabled disabled LAN1
enabled disabled LAN2
Apply
LOGOUT
Figure 5.7.: Ethernet Ports
This menu can be used to individually assign each Ethernet port to a LAN
interface, just in case you want to have different subnets per port or use one
port as WAN interface. You may assign multiple ports to the same interface.
NB1810
50
User Manual for NRSW version 4.8.0.102
Ethernet Link Settings
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
Digital I/O
GNSS
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
Port Assignment
Link Settings
Link speed for Ethernet 1: Link speed for Ethernet 2:
Apply
auto-negotiated auto-negotiated
LOGOUT
Figure 5.8.: Ethernet Link Settings
Link negotiation can be set for each Ethernet port individually. Most devices
support auto-negotiation which will configure the link speed automatically to
comply with other devices in the network. In case of negotiation problems, you
may assign the modes manually but it has to be ensured that all devices in the
network utilize the same settings then.
NB1810
51
User Manual for NRSW version 4.8.0.102
Authentication via IEEE 802.1X
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges USB Serial GNSS
NB3800 NetModule Router Hostname nb Software Version 4.7.0.100 © 2004-2022,
NetModule AG
Port Assignment Link Settings Wired 802.1X
Ethernet 1 Wired 802.1X status:
Ethernet 2 Wired 802.1X status: EAP type: Anonymous identity: Identity:
Password: Certificates: Ethernet 3 Wired 802.1X status: Reauthentication
Period: Authenticator ID: Use MAB: Ethernet 4 Wired 802.1X status:
Ethernet 5 Wired 802.1X status:
Apply
disabled Client Authenticator
disabled Client Authenticator PEAP
Netmodule-Anon
testid
·········
show
missing Manage keys and certificates
disabled Client Authenticator 3600 Netmodule-Auth
disabled Client Authenticator
disabled Client Authenticator
LOGOUT
Figure 5.9.: Authentication via IEEE 802.1X
NetModule-routers support authentication via the IEEE 802.1X standard. This
can be configured for each Ethernet port individually. The following options
exist:
NB1810
52
User Manual for NRSW version 4.8.0.102
Parameter Wired 802.1X status EAP type Anonymous identity Identity Password Certificates
Wired IEEE 802.1X Client Settings If set to Client, the router will authenticate on this port via IEEE 802.1X Which protocol to use to authenticate The anonymous identify for PEAP authentication The identify for EAP-TLS or PEAP authentication (required) The password for PEAP authentication (required) Certificates for authentication via EAP-TLS or PEAP. Can be configured in chapter 5.8.8
Parameter Wired 802.1X status
Reauthentication Period Authenticator ID Use MAB
Einstellungen IEEE 802.1X Authenticator
If set to Authenticator, the router will propagate IEEE 802.1X authentication
requests on this port to a configured RADIUS server (see chapter 5.8.2)
Time in seconds after which a connected client has to reauthenticate
This unique name identifies the authenticator at the RADIUS server
Activate this option if you want to allow authentication of devices which are
not capable of IEEE 802.1X via MAC Authentication Bypass. These are reported
to the RADIUS server with their MAC address as user name and password
PoE Power Supply If available the optional PoE power supply can be activated or deactivated individually for each port.
NB1810
53
User Manual for NRSW version 4.8.0.102
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
GNSS
NB1800 NetModule Router Hostname NB1800 Software Version 4.7.0.100 ©
2004-2022, NetModule AG
Port Assignment Link Settings Wired 802.1X
PoE
Ethernet 3
Operating mode:
auto
Ethernet 4
Operating mode:
auto
Ethernet 5
Operating mode:
auto
Ethernet 6
Operating mode:
auto
Apply
LOGOUT
Figure 5.10.: PoE Power Supply
Parameter Operating mode
PoE Settings
The value “auto” enables the power supply. A valid power supply setting is
negotiated with the supplied device automatically. The value “off” disables
the power supply on this port.
VLAN Management
NetModule routers support Virtual LAN according to IEEE 802.1Q which can be
used to create virtual interfaces on top of an Ethernet interface. The VLAN
protocol inserts an additional header to Ethernet frames carrying a VLAN
Identifier (VLAN ID) which is used for distributing the packets to the
associated virtual interface. Any untagged packets, as well as packets with an
unassigned ID, will be distributed to the native interface.
NB1810
54
User Manual for NRSW version 4.8.0.102
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
Digital I/O
GNSS
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
VLAN Management
VLAN ID
Interface
LAN1-1
1
Network Interface Priority
LAN1
default
LAN1-2
5
LAN1
background
Mode routed routed
LOGOUT
Figure 5.11.: VLAN Management
In order to form a distinctive subnet, the network interface of a remote LAN
host must be configured with the same VLAN ID as defined on the router.
Further, 802.1P introduces a priority field which influences packet scheduling
in the TCP/IP stack.
The following priority levels (from lowest to highest) exist:
Parameter 0 1 2 3 4 5 6 7
VLAN Priority Levels Background Best Effort Excellent Effort Critical Applications Video (< 100 ms latency and jitter) Voice (< 10 ms latency and jitter) Internetwork Control Network Control
NB1810
55
User Manual for NRSW version 4.8.0.102
IP Settings This page can be used to configure IP addressing for your LAN/WAN Ethernet interfaces.
Parameter Mode MTU
LAN IP Settings Defines whether this interface is being used as LAN or WAN
interface.
The Maximum Transmission Unit for the interface, if provided it will specify
the largest size of a packet transmitted on the interface.
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
LOGOUT
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
GNSS
NB2800 NetModule Router Hostname NB2800 Software Version 4.6.0.100 ©
2004-2021, NetModule AG
IP Address Management
Network Interface
Mode IP Address Mode
LAN1
LAN STATIC
LAN1-1
LAN STATIC
LAN1-2
LAN STATIC
LAN2
WAN DHCP
IP Address 192.168.1.1 192.168.101.1 192.168.102.1 –
Netmask 255.255.255.0 255.255.255.0 255.255.255.0 –
Figure 5.12.: LAN IP Configuration
NB1810
56
User Manual for NRSW version 4.8.0.102
LAN-Mode When running in LAN mode, the interface may be configured with the following settings:
Parameter IP address Netmask Alias IP address Alias Netmask MAC
LAN IP Settings The IP interface address The netmask for this interface Optional alias IP interface address Optional alias netmask for this interface Custom MAC adress for this interface (not supported for VLANs)
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
GNSS
NB2800 NetModule Router Hostname NB2800 Software Version 4.6.0.100 ©
2004-2021, NetModule AG
IP Settings LAN1 Mode: Static Configuration IP address: Netmask: Alias IP
address: Alias Netmask: MTU: MAC:
Apply
LAN WAN
192.168.1.1 255.255.255.0
LOGOUT
Figure 5.13.: LAN IP Configuration – LAN Interface
NB1810
57
User Manual for NRSW version 4.8.0.102
WAN-Mode When running in WAN mode, the interface may be configured with two IP versions in the following way:
Parameter IPv4 IPv6 Dual-Stack
Description Only Internet Protocol Version 4 Only Internet Protocol Version 6 Run Internet Protocol Version 4 and Version 6 in parallel
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
GNSS
NB2800 NetModule Router Hostname NB2800 Software Version 4.6.0.100 ©
2004-2021, NetModule AG
IP Settings LAN1 Mode:
IP version: IPv4 Configuration IPv4 WAN mode: IPv6 Configuration IPv6 WAN
mode: MTU: MAC:
Apply
LAN WAN IPv4 IPv6 Dual-Stack
DHCP Static PPPoE
SLAAC Static
LOGOUT
Figure 5.14.: LAN IP Configuration – WAN Interface
NB1810
58
User Manual for NRSW version 4.8.0.102
Depending on the selected IP version you can configure your interface with the following settings:
IPv4 Settings The router can configure its IPv4 address the following ways:
Parameter DHCP
Static
PPPoE
IPv4 WAN-Modes
When running as DHCP client, no further configuration is required because all
IP-related settings (address, subnet, gateway, DNS server) will be retrieved
from a DHCP server in the network.
Allows you to define static values. Caution has to be taken to assign a unique
IP address as it would otherwise raise IP conflicts in the network.
PPPoE is commonly used when communicating with another WAN access device (like
a DSL modem).
IPv4-PPPoE Settings The following settings can be applied:
Parameter User name Password Service name
Access concentrator name
PPPoE Configuration
PPPoE user name for authenticating at the access device
PPPoE password for authenticating at the access device
Specifies the service name set of the access concentrator and can be left
blank unless you have multiple services on the same physical network and need
to specify the one you want to connect to.
The name of the concentrator (the PPPoE client will connect to any access
concentrator if left blank)
NB1810
59
User Manual for NRSW version 4.8.0.102
IPv6 Settings The router can configure its IPv6 address the following ways:
Parameter SLAAC
Static
IPv6 WAN-Modes
All IP-related settings (address, prefix, routes, DNS server) will be
retrieved by the neighbor-discovery-protocol through stateless-
addressautoconfiguration.
Allows you to define static values. Caution has to be taken to assign a unique
IP address as it would otherwise raise IP conflicts in the network. You can
only configure global addresses. The link-local address is automatically
generated via the MAC address.
DNS Server
When all enabled IP versions are set to Static, you may configure an
interface-specific nameserver. To override the interface-specific nameservers
see chapter 5.7.3.
NB1810
60
User Manual for NRSW version 4.8.0.102
5.3.3. Mobile
Modems Configuration This page lists all available WWAN modems. They can be
disabled on demand.
Query This page allows you to send Hayes AT commands to the modem. Besides the
3GPP-conforming AT command-set further modem-specific commands can be
applicable which we can provide on demand. Some modems also support running
Unstructured Supplementary Service Data (USSD) requests, e.g. for querying the
available balance of a prepaid account. SIMs
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
LOGOUT
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
Digital I/O
GNSS
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
Mobile SIMs
This menu can be used to assign a default modem to each SIM which will also be
used by SMS and GSM voice services. A SIM card can get switched in case of
multiple WWAN interfaces sharing the same modem.
SIM Default SIM1 Mobile1
Current Mobile1
SIM State missing
SIM Lock unknown
Registered no
Update
Figure 5.15.: SIMs
The SIM page gives an overview about the available SIM cards, their assigned
modems and the current state. Once a SIM card has been inserted, assigned to a
modem and successfully unlocked, the card should remain in state ready and the
network registration status should have turned to registered. If
NB1810
61
User Manual for NRSW version 4.8.0.102
not, please double-check your PIN. Please keep in mind that registering to a network usually takes some time and depends on signal strength and possible radio interferences. You may hit the Update button at any time in order to restart PIN unlocking and trigger another network registration attempt. Under some circumstances (e.g. in case the modem flaps between base stations) it might be necessary to set a specific service type or assign a fixed operator. The list of operators around can be obtained by initiating a network scan (may take up to 60 seconds). Further details can be retrieved by querying the modem directly, a set of suitable commands can be provided on request.
NB1810
62
User Manual for NRSW version 4.8.0.102
Configuration
A SIM card is generally assigned to a default modem but might be switched, for
instance if you set up two WWAN interfaces with one modem but different SIM
cards. Close attention has to be paid when other services (such as SMS or
Voice) are operating on that modem, as a SIM switch will naturally affect
their operation. The following settings can be applied:
Parameter PIN code PUK code Default modem Preferred service
Registration mode Network selection
WWAN SIM Configuration
The PIN code for unlocking the SIM card
The PUK code for unlocking the SIM card (optional)
The default modem assigned to this SIM card
The preferred service to be used with this SIM card. Remember that the link
manager might change this in case of different settings. The default is to use
automatic, in areas with interfering base stations you can force a specific
type (e.g. 3G-only) in order to prevent any flapping between the stations
around.
The desired registration mode
Defines which network shall be selected. This can be bound to a specific
provider ID (PLMN) which can be retrieved by running a network scan.
NB1810
63
User Manual for NRSW version 4.8.0.102
eSIM / eUICC
Attention: Note that eUICC profiles are NOT affected by a factory reset. To
remove an eUICC profile from a device, manually remove it before performing
the factory reset.
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
Serial
GNSS
CAN
Bluetooth
NG800 NetModule Router Hostname Simulator Software Version 4.6.0.100 ©
2004-2021, NetModule AG
SIM Card
eSIM Profiles
Profile configuration for embedded SIM1
ICCID
Operator
Name
EID: 89033032426180001000002063768022
Nickname
LOGOUT
Figure 5.16.: eSIM Profiles
Selected router models contain an eUICC (embedded universal integrated circuit
card) which allows you to download eSIM profiles from the internet to the
router instead of having to insert a physical SIM card into the router. The
eSIM profiles to be installed must be compliant to the GSMA RSP Technical
Specification SGP.22. These are the same eSIM profiles that are used with
current mobile phones. Profiles according to the older GSMA SGP.02
specification are not supported. eSIM profiles can be managed on the “eSIM
Profiles” tab of the “Mobile / SIMs” configuration page. The management page
allows you to display all installed eSIM profiles as well as to install,
enable, disable and delete eSIM profiles. It is also possible to store a
nickname for each profile. The eUICC can store up to about 7 eSIM profiles
depending on the size of the profiles. Only one of those profiles can be
active at a time. In order to install new eSIM profiles, you need to first
establish IP connectivity to the internet so that
NB1810
64
User Manual for NRSW version 4.8.0.102
the router can download the profile from the mobile network operator’s server.
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
Serial
GNSS
CAN
Bluetooth
NG800 NetModule Router Hostname Simulator Software Version 4.6.0.100 ©
2004-2021, NetModule AG
Add eUICC profile to SIM1 Method:
Activation code: ? Confirmation code:
Apply
Activation/QR Code Root discovery service scan or upload QR code
LOGOUT
Figure 5.17.: Add eUICC Profile
The following two ways are supported to install eSIM profiles and can be
selected on the eSIM profiles configuration page:
1. QR code provided by the network operator To download the eSIM profile
using this method your mobile network operator provides you a QR code which
contains the information about the eSIM profile to be installed. If the device
you are using to access the configuration GUI of the router has a camera, you
can scan the QR code using the camera. Otherwise you can also upload an image
file of the QR code. Or it is also possible to enter the contents of the QR
code manually into the corresponding input field.
2. GSMA Root Discovery Service When using this method, you need to provide
the EID, which is a unique number that identifies the eUICC of the router, to
your mobile network operator. The EID is displayed on the eSIM profiles
configuration page. The operator will then prepare the eSIM profile for your
router on his provisioning servers. Afterwards, you can use the GSMA Root
Discovery Service method to retrieve the eSIM
NB1810
65
User Manual for NRSW version 4.8.0.102
profile without having to specify any additional information for the download. Note: Most mobile network operators allow only one download of an eSIM profile. So, if you download the profile once and delete it afterwards, you will not be able to download the same profile a second time. In this case you would need to request a new eSIM profile from your operator.
NB1810
66
User Manual for NRSW version 4.8.0.102
WWAN Interfaces
This page can be used to manage your WWAN interfaces. The resulting link will
pop up automatically as WAN link once an interface has been added. Please
refer to chapter 5.3.1 for how to manage them.
The Mobile LED will be blinking during the connection establishment process
and goes on as soon as the connection is up. Refer to section 5.8.7 or consult
the system log files for troubleshooting the problem in case the connection
did not come up.
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
Digital I/O
GNSS
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
Mobile Interfaces Interface Modem SIM PDP WWAN1 Mobile1 SIM1 PDP1
Number Service APN / User *99***1# automatic internet.telekom / tm
LOGOUT
Figure 5.18.: WWAN Interfaces
The following mobile settings are required:
Parameter Modem SIM Service type
WWAN Mobile Parameters The modem to be used for this WWAN interface The SIM card to be used for this WWAN interface The required service type
Please note that these settings supersede the general SIM based settings as soon as the link is being dialed.
NB1810
67
User Manual for NRSW version 4.8.0.102
Generally, the connection settings are derived automatically as soon as the modem has registered and the network provider has been found in our database. Otherwise, it will be required to configure the following settings manually:
Parameter Phone number
Access point name IP version
Authentication Username Password
WWAN Connection Parameters
The phone number to be dialed, for 3G+ connections this commonly refers to be
*99***1#. For circuit-switched 2G connections you can enter the fixed phone
number to be dialed in international format (e.g. +41xx).
The access point name (APN) being used
What IP version to use. Dual-stack lets you use IPv4 and IPv6 together. Please
note, that your provider might not support all IP versions.
The authentication scheme being used, if required this can be PAP or/and CHAP
The user-name used for authentication
The password used for authentication
Furtheron, you may configure the following advanced settings:
Parameter Required signal strength Home network only Negotiate DNS Call to
ISDN Header compression
Data compression Client address MTU
WAN Advanced Parameters
Sets a minimum required signal strength before the connection is dialed
Determines whether the connection should only be dialed when registered to a
home network
Specifies whether the DNS negotiation should be performed and the retrieved
name-servers should be applied to the system
Has to be enabled in case of 2G connections talking to an ISDN modem
Enables or disables 3GPP header compression which may improve TCP/IP
performance over slow serial links. Has to be supported by your provider.
Enables or disables 3GPP data compression which shrinks the size of packets to
improve throughput. Has to be supported by your provider.
Specifies a fixed client IP address if assigned by the provider
The Maximum Transmission Unit for this interface
NB1810
68
User Manual for NRSW version 4.8.0.102
5.3.4. WLAN
WLAN Management In case your router is shipping with a WLAN (or Wi-Fi) module
you can operate it either as client, access point, mesh point or certain dual
modes. As a client it can create an additional WAN link which for instance can
be used as backup link. As access point, it can form another LAN interface
which can be either bridged to an Ethernet-based LAN interface or create a
self-contained IP interface which can be used for routing and to provide
services (such as DHCP/DNS/NTP) in the same way like an Ethernet LAN interface
does. As mesh point, it can create a wireless mesh network to provide a
backhaul connectivity with dynamic path selection. As dual mode, it is
possible to run access point and client or mesh point and access point
functionality on the same radio module.
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
Digital I/O
GNSS
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
WLAN Management Administrative status:
Operational mode:
Regulatory domain: Operation type: Radio band: Bandwidth: Channel: Number of antennas: Antenna gain:
Apply
Continue
enabled disabled client access point mesh point dual modes European Union
802.11b 2.4 GHz 20 MHz
Auto
2 0 dB
Channel utilisation
LOGOUT
Figure 5.19.: WLAN Management
If the administrative status is set to disabled, the module will be powered
off in order to reduce the overall power consumption. Regarding antennas, we
generally recommend using two antennas for better coverage and throughput. A
second antenna is definitely mandatory if you want to achieve higher
throughput rates as in 802.11n. A WLAN client and a mesh point will
automatically became a WAN link and can be managed as described in chapter
5.3.1.
NB1810
69
User Manual for NRSW version 4.8.0.102
Configurable parameters for access-point, client mode, mesh point and any dual mode:
Parameter Regulatory Domain Number of antennas Antenna gain
Tx power Disable low data rates
WLAN Management Select the country the Router operates in Set the number of connected antennas Specify the antenna gain for the connected antennas. Please refer to the antennas datasheet for the correct gain value. Specifies the max. transmit power used in dBm. Avoid sticky clients by disabling low data rates.
Warning Please be aware that any inappropriate parameters can lead to an infringement of conformity regulations.
Running as access point or dual mode, you can further configure the following settings:
Parameter Operation type Radio band
Outdoor Bandwidth Channel enable client tracking Short Guard Interval
WLAN Management Specifies the desired IEEE 802.11 operation mode Selects the radio band to be used for connections, depending on your module it could be 2.4 or 5 GHz Shows the 5 GHz outdoor channels Specify the channel bandwidth operation mode Specifies the channel to be used Enables the tracking of non associated clients Enables the Short Guard Interval (SGI)
Running as client, you can further configure the following settings:
Parameter Scan channels
2.4 GHz 5 GHz
WLAN Management Select if all supported channels should be scanned or just user defined channels Set the channels which should be scanned in 2.4 GHz Set the channels which should be scanned in 5 GHz
Available operation modes are:
NB1810
70
User Manual for NRSW version 4.8.0.102
Standard 802.11a 802.11b 802.11g 802.11n 802.11ac
Frequencies 5 GHz 2.4 GHz 2.4 GHz 2.4/5 GHz 5 GHz
Bandwidth 20 MHz 20 MHz 20 MHz 20/40 MHz 20/40/80 MHz
Table 5.26.: IEEE 802.11 Network Standards
Data Rate 54 Mbit/s 11 Mbit/s 54 Mbit/s 300 Mbit/s 866.7 Mbit/s
NB1810
71
User Manual for NRSW version 4.8.0.102
Running as mesh point, you can further configure the following settings:
Parameter Radio band
Channel
WLAN Mesh-Point Management Selects the radio band to be used for connections,
depending on your module it could be 2.4 or 5 GHz
Specifies the channel to be used
Note: NetModule Routers with 802.11n and 802.11ac support 2×2 MIMO
NB1810
72
User Manual for NRSW version 4.8.0.102
Prior to setting up an access point, it is always a good idea to run a network
scan for getting a list of neighboring WLAN networks and then choose the less
interfering channel. Please note that two adequate channels are required for
getting good throughputs with 802.11n and a bandwidth of 40 MHz.
WLAN Configuration Running in client mode, it is possible to connect to one
ore more remote access-points. The system will switch to the next network in
the list in case one goes down and return to the highest-prioritized network
as soon as it comes back. You can perform a WLAN network scan and pick the
settings from the discovered information directly. The authentication
credentials have to be obtained by the operator of the remote access point.
Parameter SSID Security mode WPA mode
WPA cipher
Identity Passphrase
Force PMF Enable fast transition
Required signal strength
WLAN Client Configuration The network name (called SSID)
The desired security mode
The desired encryption method. WPA3 should be preferred over WPA2 and WPA1
The WPA cipher to be used, the default is to run both (TKIP and CCMP)
The identity used for WPA-RADIUS and WPA-EAP-TLS
The passphrase used for authentication with WPA-Personal, otherwise the key
passphrase for WPA-EAP-TLS
Enables Protected Management Frames
If client, enable fast roaming capabilites via FT. FT is only performed if the
AP supports this feature, too
Required signal strength to esablish the connection
The client is performing background scans for the purpose of roaming within an ESS. The background scans are based on the current signal strenght.
Parameter Threshold
Long interval
Short interval
WLAN Client Background Scan Parameters
The signal strength threshold in dBm when the long or short time interval
should occur
The time in seconds when a background scan should be performed if the
threshold is above the given threshold value
The time in seconds when a background scan should be performed if the
threshold is below the given threshold value
NB1810
73
User Manual for NRSW version 4.8.0.102
Running in access-point mode you can create up to 8 SSIDs with each running their own network configuration. The networks can be individually bridged to a LAN interface or operate as dedicated interface in routing-mode.
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
LOGOUT
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
Digital I/O
GNSS
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
WLAN Access-Point Configuration
Interface
SSID
WLAN1
NB1600-Private
Security Mode WPA / Cipher
WPA-PSK
WPA + WPA2 / TKIP + CCMP
Figure 5.20.: WLAN Configuration
NB1810
74
User Manual for NRSW version 4.8.0.102
This section can be used to configure security-related settings.
Parameter
WLAN Access-Point Configuration
SSID
The network name (called SSID)
Security mode
The desired security mode
WPA mode
The desired encryption method. WPA3 + WPA2 mixed mode should be preferred
WPA cipher
The WPA cipher to be used, the default is to run both (TKIP and CCMP)
Passphrase
The passphrase used for authentication with WPA-Personal.
Force PMF
Enables Protected Management Frames
Hide SSID
Hides the SSID
Isolate clients
Disables client-to-client communication
Band steering master
The WLAN interface which the client should be steered to
Opportunistic Wireless En- The WLAN interface for a seamless transition from an OPEN WLAN
cryption transition
to an OWE encrypted WLAN interface
Accounting
Sets accounting profile
The following security modes can be configured:
Parameter Off None WEP WPA-Personal
WPA-Enterprise
WPA-RADIUS
WPA-TLS
OWE
WLAN Security Modes
SSID is disabled
No authentication, provides an open network
WEP (is nowadays discouraged)
WPA-Personal (TKIP, CCMP), provides password-based authentication
WPA-Enterprise in AP mode, can be used to authenticate against a remote RADIUS
server which can be configured in chapter 5.8.2
EAP-PEAP/MSCHAPv2 in client mode, can be used to authenticate against a remote
RADIUS server which can be configured in chapter 5.8.2
EAP-TLS in client mode, performs authentication using certificates which can
be configured in chapter 5.8.8
Opportunistic Wireless Encryption alias Enhanced OPEN provides encryption WLAN
without any authentication
NB1810
75
User Manual for NRSW version 4.8.0.102
Running in mesh point mode, it is possible to connect to one or more mesh points within the mesh network at the same time. The system will automatically join the wireless network, connect to the other mesh partners with the same ID and sercurtiy credentials. The authentication credentials have to be obtained by the operator of the mesh network.
Parameter
WLAN Mesh-Point Configuration
MESHID
The network name (called MESHID)
Security mode
The desired security mode
enable gate announcements To enable gate announcments for the mesh network
NB1810
76
User Manual for NRSW version 4.8.0.102
The following security modes can be configured:
Parameter Off None SAE
WLAN Mesh-Point Security Modes MESHID is disabled No authentication, provides an open network SAE (Simultaneous Authentication of Equals) is a secure passwordbased authentication and key establishment protocol
NB1810
77
User Manual for NRSW version 4.8.0.102
WLAN IP Settings
This section lets you configure the TCP/IP settings of your WLAN network. A
client and mesh point interface can be run over DHCP or with a statically
configured address and default gateway.
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
Digital I/O
GNSS
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
WLAN1 IP Settings Network mode: IP address: Netmask:
Apply
Continue
bridged routed 192.168.200.1 255.255.255.0
LOGOUT
Figure 5.21.: WLAN IP Configuration
The access point networks can be bridged to any LAN interface for letting WLAN clients and Ethernet hosts operate in the same subnet. However, for multiple SSIDs we strongly recommend to set up separated interfaces in routing-mode in order to avoid unwanted access and traffic between the interfaces. The corresponding DHCP server for each network can be configured in afterwards as described in chapter 5.7.2.
Parameter Network mode
Bridge interface
IP address / netmask
WLAN IP Settings
Choose whether the interface shall be operated bridged or in routingmode
If bridged, the LAN interface to which the WLAN network should be bridged
In routing-mode, the IP address and netmask for this WLAN network
NB1810
78
User Manual for NRSW version 4.8.0.102
The following feature can be configured if the WLAN interface is bridged
Parameter 4addr frame IAPP Pre-auth
Fast transition
WLAN Bridging features
Enables the 4-address frame format (required for bridge links)
Enables the Inter-Access Point Protocol feature
Enables the pre-authentication mechanism for roaming clients (if supported by
the client). Pre-auth is only supported with WPA2Enterprise with CCMP
Enables fast transistion (FT) capabilities for roaming client (if supported by
the client)
The following fast transistion parameters can be configured
Parameter Mobility domain Preshared key Fast transition clients only
WLAN Bridging features The mobility domain of the FT network The PSK for the FT network If enabled, the AP will only accept clients that support FT
NB1810
79
User Manual for NRSW version 4.8.0.102
5.3.5. Software Bridges
Software bridges can be used to bridge layer-2 devices like OpenVPN TAP, GRE
or WLAN interfaces without the need for a physical LAN interface.
Bridge Settings This page can be used to enable/disable software bridges. It
can be configured as follows:
Parameter Administrative status IP Address Netmask MTU
Bridge Settings
Enables or disables the bridge interface. If you need an interface to the
local system you need to define an IP address for the local device.
IP address of the local interface (available only if “Enabled with local
interface” was selected
Netmask of the local interface (available only if “Enabled with local
interface” was selected
Optional MTU size for the local interface (available only if “Enabled with
local interface” was selected
NB1810
80
User Manual for NRSW version 4.8.0.102
5.3.6. USB
NetModule routers ship with a standard USB host port which can be used to
connect a storage, network or serial USB device. Please contact our support in
order to get a list of supported devices.
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
Digital I/O
GNSS
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
Administration USB Administration
Devices
Autorun
This menu can be used to activate USB-based serial and network devices.
Administrative status:
enabled disabled
Enable hotplug:
Apply
LOGOUT
USB Administration
Parameter Administrative status Enable hotplug
Figure 5.22.: USB Administration
USB Administration Specifies whether devices shall be recognized Specifies
whether device shall be recognized if plugged in during runtime or only at
bootup
NB1810
81
User Manual for NRSW version 4.8.0.102
USB Devices
This page shows the currently connected devices and it can be used to enable a
specific device based on its Vendor and Product ID. Only enabled devices will
be recognized by the system and raise additional ports and interfaces.
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
Digital I/O
GNSS
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
Administration
Devices
Autorun
Connected USB Devices Vendor ID Product ID Bus ID Manufacturer
Device
Enabled USB Devices Vendor ID Product ID Bus ID Module
Type
Refresh
LOGOUT
Type Attached
Figure 5.23.: USB Device Management
Parameter Vendor ID Product ID Module
USB Devices The USB Vendor ID of the device The USB Product ID of the device The USB module and type of driver to be applied for this device
Any ID must be specified in hexadecimal notation, wildcards are supported (e.g. AB[0-1][2-3] or AB*) A USB network device will be referenced as LAN10.
NB1810
82
User Manual for NRSW version 4.8.0.102
5.3.7. Serial This page can be used to manage your serial ports. A serial port can be used by:
Parameter none login console
device server modem bridge modem emulator
SDK
Serial Port Usage
The serial port is not used
The serial port is used to open a console which can be accessed with a serial
terminal client from the other side. It will provide helpful bootup and kernel
messages and spawns a login shell, so that users can login to the system. If
more than one serial interface is available, one serial interface can be
configured as ‘login console’ at a time.
The serial port will be exposed over a TCP/IP port and can be used to
implement a Serial/IP gateway.
Bridges the serial interface to the Modem TTY of an intergrated WWAN Modem.
Emulates a classical AT command driven modem on the serial interface. See
http://wiki.netmodule.com/app-notes/hayes-modemat-simulator for detailed
information.
The serial port will be reserved for SDK scripts.
NB1810
83
User Manual for NRSW version 4.8.0.102
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges
USB
Serial
Digital I/O
GNSS
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
Administration
Port Settings
SERIAL1 is used by:
Apply
Back
none login console device server modem emulator SDK
Figure 5.24.: Serial Port Administration
LOGOUT
NB1810
84
User Manual for NRSW version 4.8.0.102
Running a device server, the following settings can be applied:
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
WAN Link Management Supervision Settings
Ethernet Port Setup VLAN Management IP Settings
Mobile Modems SIMs Interfaces
WLAN Administration Configuration IP Settings
Bridges USB Serial Digital I/O GNSS
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
Administration
Port Settings
SERIAL1 Port Settings
Physical protocol: Baud rate: Data bits: Parity: Stop bits: Software flow
control: Hardware flow control: Server Configuration Protocol on IP port:
Port:
Timeout: Allow remote control (RFC 2217): Show banner:
Allow clients from:
Apply
RS232 115200 8 data bits None 1 stop bit None None
Telnet
2000
endless
numbered
600
everywhere specify
Figure 5.25.: Serial Port Settings
LOGOUT
Parameter Physical protocol Baud rate Data bits Parity Stop bits
NB1810
Serial Settings Selects the desired physical protocol on the serial port Specifies the baud rate run on the serial port Specifies the number of data bits contained in each frame Specifies the parity used for every frame that is transmitted or received Specifies the number of stop bits used to indicate the end of a frame
85
User Manual for NRSW version 4.8.0.102
Parameter Software flow control
Hardware flow control Protocol on TCP/IP Port Timeout
Serial Settings
Defines the software flow control for the serial port, XOFF will send a stop,
XON a start character to the other end to control the rate of any incoming
data
You may enable RTS/CTS hardware flow control, so that the RTS and CTS lines
are used to control the flow of data
You may choose the IP protocols Telnet or TCP raw for the device server
The TCP port for the device server
The timeout until a client is declared as disconnected
Parameter Protocol on IP port Port Timeout
Allow remote control Show banner Stop bits Allow clients from
Server Settings Selects the desired IP protocol (TCP or Telnet) Specifies the TCP port on which the server will be available The time in seconds before the port will be disconnected if there is no activity on it. A zero value disables this function. Allow remote control (ala RFC 2217) of the serial port Show a banner when clients connect Specifies the number of stop bits used to indicate the end of a frame Specifies which clients are allowed to connect to the server
Please note that the device server does not provide authentication or
encryption and clients will be able connect from everywhere. Please consider
to restrict access to a limited network/host or block packets by using the
firewall.
When running the serial port as AT modem emulator the following settings can
be applied:
Parameter Physical protocol Baud rate Hardware flow control
Serial Port Settings Selects the desired physical protocol on the serial port Specifies the baud rate run on the serial port You may enable RTS/CTS hardware flow control, so that the RTS and CTS lines are used to control the flow of data
Parameter Port
Incoming connections via Telnet The TCP port for the device server
Parameter Number
Phonebook Entries Phone number that will get an alias
NB1810
86
User Manual for NRSW version 4.8.0.102
Parameter IP address Port
Phonebook Entries IP address the number will become Port value for the IP address
NB1810
87
User Manual for NRSW version 4.8.0.102
5.3.8. GNSS
Configuration
The GNSS page lets you enable or disable the GNSS modules present in the
system and can be used to configure the daemon that can be used to share
access to receivers without contention or loss of data and to respond to
queries with a format that is substantially easier to parse than the NMEA 0183
emitted directly by the GNSS device.
We are currently running the Berlios GPS daemon (version 3.15), supporting the
new JSON format. Please navigate to http://www.catb.org/gpsd/ for getting more
information about how to connect any clients to the daemon remotely. The
position values can also be queried by the CLI and used in SDK scripts.
Parameter Administrative status Operation mode Antenna type Accuracy
Fix frame interval
GNSS Module Configuration
Enable or disable the GNSS module
The mode of operation, either standalone or assisted (for A-GPS)
The type of the connected GPS antenna, either passive or actively 3 volt
powered
The GNSS receiver compares the calculated position accuracy based on the
satellite information and compares it with this accuracy threshold in meters.
If the calculated position accuracy is better than the accuracy threshold, the
position is reported. Adjust this parameter to a higher threshold in case the
GNSS receiver does not report a position fix, or when it takes a long time to
calculate a fix. This could be caused when there is no clear sky view of the
GNSS antenna which is the case in tunnels, beside tall buildings, trees, and
so on.
The amount of time to wait between fix attempts
If the GNSS module does support AssistNow and the operation mode is assisted the following configuration can be done:
Parameter Primary URL Secondary URL
GNSS Assisted GPS Configuration The primary AssistNow URL The secondary AssistNow URL
Information about AssistNow: If you have a lot of devices in the field that use the AssistNow service, please consider creating your own AssistNow token at http://www. u-blox.com. If there are too many requests per time, the service may not work as expected. If you have further questions, please contact our support.
Parameter Server port
GNSS Server Configuration
The TCP port on which the daemon is listening for incoming connections
NB1810
88
User Manual for NRSW version 4.8.0.102
Parameter Allow clients from
Clients start mode
GNSS Server Configuration
Specifies where clients can connect from, can be either everywhere or from a
specific network
Specifies how data transferal is accomplished when a client connects. You can
specify on request which typically requires an R to be sent. Data will be sent
instantly in case of raw mode which will provide NMEA frames or super-raw
which includes the original data of the GPS receiver. If the client supports
the JSON format (i.e. newer libgps is used) the json mode can be specified.
Please consider to restrict access to the server port, either by a specifying a dedicated client network or by using a firewall rule.
Information about Dead Reckoning: If you have a device which supports Dead Reckoning, please consult the GNSS Dead Reckoning installation guide for further information or please contact our support.
NB1810
89
User Manual for NRSW version 4.8.0.102
Position This pages provides further information about the satellites in view and values derived from them:
Parameter Latitude Longitude Altitude Satellites in view Speed
Satellites used
Dilution of precision
GNSS Information The geographic coordinate specifying the north-south position The geographic coordinate specifying the east-west position The height above sea level of the current location The number of satellites in view as stated in GPGSV frames The horizontal and vertical speed in meter per second as stated in GPRMC frames The number of satellites used for calculating the position as stated in GPGGA frames The dilution of precision as stated in GPGSA frames
Furtheron, each satellite also comes with the following details:
Parameter PRN Elevation Azimuth SNR
GNSS Satellite Information
The PRN code of the satelitte (also referred as satellite ID) as stated in
GPGSA frames
The elevation (up-down angle between the dish pointing direction) in degrees
as stated in GPGSV frames
The azimuth (rotation around the vertical axis) in degrees as stated in GPGSV
frames
The SNR (Signal to Noise Ratio), often referred as signal strength
Please note that the values are shown as calculated by the daemon, their
accuracy might be suggestive.
Supervision
Parameter Administrative status Mode Max. downtime
Emergency action
GNSS Supervision
Enable or disable GNSS supervision
Specifies whether to monitor the NMEA stream or GPS fixes
The period of time without valid NMEA stream or GPS fix after which an
emergency action shall be taken
The corresponding emergency action. You can either let just restart the
server, which will also re-initialize the GPS function on the module, or reset
the module in severe cases. Please note that this may have effects on any
running WWAN/SMS services.
NB1810
90
User Manual for NRSW version 4.8.0.102
5.4. ROUTING
5.4.1. Static Routes
This menu shows all routing entries of the system. They are typically formed
by an address/netmask couple (represented in IPv4 dotted decimal notation)
which specify the destination of a packet. The packets can be directed to
either a gateway or an interface or both. If interface is set to ANY, the
system will choose the route interface automatically, depending on the best
matching network configured for an interface.
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
LOGOUT
Static Routes Extended Routes Multipath Routes Multicast
IGMP Proxy Static Routes BGP OSPF Mobile IP Administration QoS Administration
Classification
Static Routes
This menu shows all routing entries of the system, they can consist of active and configured ones. The flags are as follows: (A)ctive, (P)ersistent, (H)ost Route, (N)etwork Route, (D)efault Route (Netmasks can be specified in CIDR notation)
Destination Netmask
Gateway
Interface Metric Flags
192.168.1.0 255.255.255.0 0.0.0.0
LAN1 0 AN
192.168.101.0 255.255.255.0 0.0.0.0
LAN1-1 0 AN
192.168.102.0 255.255.255.0 0.0.0.0
LAN1-2 0 AN
192.168.200.0 255.255.255.0 0.0.0.0
WLAN1 0 AN
Route lookup
NetModule Router Simulator Hostname NB1600 Software Version 4.4.0.103 ©
2004-2020, NetModule AG
Figure 5.26.: Static Routing
In general, host routes precede network routes and network routes precede
default routes. Additionally, a metric can be used to determine the priority
of a route, a packet will go in the direction with the lowest metric in case a
destination matches multiple routes. Netmasks can be specified in CIDR
notation (i.e. /24 expands to 255.255.255.0).
NB1810
91
User Manual for NRSW version 4.8.0.102
Parameter Destination Netmask
Gateway Interface Metric Flags
Static Route Configuration
The destination address of a packet
The subnet mask which forms, in combination with the destination, the network
to be addressed. A single host can be specified by a netmask of
255.255.255.255, a default route corresponds to 0.0.0.0.
The next hop which operates as gateway for this network (can be omitted on
peer-to-peer links)
The network interface on which a packet will be transmitted in order to reach
the gateway or network behind it
The routing metric of the interface (default 0), higher metrics have the
effect of making a route less favorable
(A)ctive, (P)ersistent, (H)ost Route, (N)etwork Route, (D)efault Route
The flags obtain the following meanings:
Flag
Description
A
The route is considered active, it might be inactive if the interface for this route is not yet
up.
P
The r
References
- autorun.sh
- My Dyn Account
- NetModule | Robust Communication
- Licenses – Open Source Initiative
- Home | u-blox
- app-notes:hayes-modem [NetModule Router Wiki]
- app-notes:hayes-modem-at-simulator [NetModule Router Wiki]
- GPSD redirection page
- The FreeBSD Project
- The GNU Operating System and the Free Software Movement
- GNU General Public License v2.0 - GNU Project - Free Software Foundation
- gnu.org/licenses/gpl-2.0.txt
- gnu.org/licenses/lgpl.txt
- netfilter/iptables project homepage - The netfilter.org project
- /index.html
- /index.html
- Business VPN For Secure Networking | OpenVPN
- PHP: Hypertext Preprocessor
- Home | u-blox
- Wireshark · Go Deep
- Support | NetModule
- Support | NetModule
- Login required - ITxPT Wiki
- start [NetModule Router Wiki]
- NetModule | Robust Communication
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>