PHILIPS RD Series MyCreation Decorative Pendant Light Instruction Manual
- October 30, 2023
- Philips
Table of Contents
PHILIPS RD Series MyCreation Decorative Pendant Light
Product Information
Pendant Track-Mounted (PT) and Pendant Surface-Mounted Canopy (PS)
- The product is available in two variants: Pendant Track-Mounted (PT) and Pendant Surface-Mounted Canopy (PS).
- The PT variant is suitable for indoor usage with a voltage range of 220V 50Hz to 240V 60Hz. It is designed to accommodate T10 LED bulbs only with a maximum power of 40W.
- The PS variant comes with GA 69CT dimensions of 1750/3000mm and has a maximum IP20 rating. The product has a maximum glow wire rating of 850°C.
- The product is subject to change without notice. Refer to the website https://pro.mycreation.lighting.philips.com/ for any updates.
- The product comes with a user manual that contains detailed instructions for usage.
Product Usage Instructions
Pendant Track-Mounted (PT)
- Before installation, choose the phase (1,2, or 3) and ensure the luminaire is disconnected from power.
- Using the provided screws, mount the PT variant on the track.
- Connect the luminaire to the power supply using the L and N wires as indicated on the product.
- Ensure that the luminaire is securely fastened and locked in place. Use a torque of 0.8Nm while fastening.
Pendant Surface-Mounted Canopy (PS)
- Before installation, ensure that the luminaire is disconnected from power.
- Choose the desired length of the PS variant and adjust the product accordingly.
- Connect the luminaire to the power supply using the L and N wires as indicated on the product.
- Ensure that the luminaire is securely fastened and locked in place. Use a torque of 0.8Nm while fastening.
- The luminaire comes with quick exchange shades that can be replaced easily.
- While handling the product, observe precautions for handling electrostatic sensitive devices.
- Clean the product with a dry cloth only.
Pendant track-mounted (PT)
Pendant surface-mounted canopy (PS)
WHAT’S IN THE BOX
Pendant track-mounted (PT)
Pendant surface-mounted canopy (PS)
Pendant track-mounted
(PT) GA69
Pendant surface-mounted
canopy (PS)
Quick exchange shades
Disconnect before servicing
Luminaire has basic insulation between Low Voltage supply and control
conductors.
The control gear and/or the external flexible cable contained in this
luminaire shall only be replaced by the manufacturer or his service agent or a
similar qualified person. The light source contained in this luminaire is not
replaceable, in case of damage replace the luminaire.
Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.
This product contains a light source of energy efficiency class: see table or label.
Disposal of the product.
This product is made of high quality materials and components that can be
recycled and reused. If a product is marked with the crossed-out circular
garbage can symbol shown here, it means that it is subject to the European
Directive 2012/19/EU. You should check the information about local facilities
collecting used electrical and electronic products and their packaging on your
own. Local regulations prohibiting the discarding of equipment and packaging
together with municipal waste must be strictly observed. Proper disposal of
used packaging and product will help to avoid potential harmful eff ects on the
environment and human health.
© 2023 Signify Holding.
All rights reserved. This document contains information relating to the
product portfolio of Signify which information may be subject to change. No
representation or warranty as to the accuracy or completeness of the
information included herein is given and any liability for any action in
reliance thereon is disclaimed. The information presented in this document is
not intended as any commercial offer and does not form part of any quotation
or contract. Philips and the Philips Shield Emblem are registered trademarks
of Koninklijke Philips N.V.. All other trademarks are owned by Signify Holding
or their respective owners.
Signify Holding.
The Netherlands
2023-05-16
4422 944 10057
© 2023 Signify Holding. All rights reserved