Quoizel OTN1512MBK and OTN1712MBK Lamps and Lighting Installation Guide

OTN1512MBK and OTN1712MBK Lamps and Lighting
Installation Guide

INSTALL ATION GUIDE FOR
OTN1512MBK and OTN1712MBK

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING

• RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.

CAUTION

• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).

TOOLS REQUIRED

CARE AND MAINTENANCE

• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
  If you need further assistance call Quoined Customer Care at 1-800-645-3184 (9:00am – 5:00pm EST), or visit us on-line at www.quoizel.com.

PACKAGE CONTENTS

MOUNTING HARDWARE

INSTALLATION

OPTION 1: PENDANT – OTN1512MBK

1. Install Rod and Fixture Loop

2. Tighten Hex Nut inside of Ceiling Canopy

3. Install Fixture Chain
   OPTIONAL: Adjust Chain as desired, using pliers and soft cloth (neither included).Suggested chain length for Ceiling height: 8 feet ceiling: use 13 links of chain and 2 quick links 9 feet ceiling: use links of 23 chain and 2 quick links 10 feet ceiling: use 33 links of chain and 2 quick links.

4. Pull Supply Wires
   Pull the supply wires with ground wire through the chain alternate links.

5. Install Crossbar

6. Wiring

7. Install Ceiling Canopy to Crossbar

8. Install Glass Shade and Bulb
   Install the correct bulb referring to fixture markings and/or labels for maximum wattage.Your installation is now complete! Restore electricity and save this sheet for future reference.

IMPORTANT: This CONVERTIBLE fixture can be mounted as pendant light or semi-flush light. DO NOT CUT SUPPLY WIRES if you intend to use it as pendant light.
OPTION 2: SEMI-FLUSH – OTN1712MBK

• Set aside Fixture Loop Rod , , Quick Link and Fixture Chain since they are not required for the semi-flush installation.

  1. Remove Loop from Ceiling Canopy * Set aside the Loop with nipple since they are not required for the semi-flush installation.

  2. Install Ceiling Canopy to Socket Assembly

  3. Install Crossbar

  4. Wiring
     Cut supply wires and leave approximately 8″ from ceiling canopy.
     

  5. Install Ceiling Canopy to Crossbar

  6. Install Glass Shade and Bulb

Install the correct bulb referring to fixture markings and/or labels for maximum wattage.        Your installation is now complete! Restore electricity and save this sheet for future reference.

References

• Quoizel | Artisans In Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>