QUOIZEL OTN1512MBK Otten 1-Light Matte Black Shaded Pendant Installation Guide
- October 30, 2023
- QUOIZEL
Table of Contents
QUOIZEL OTN1512MBK Otten 1-Light Matte Black Shaded Pendant
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
- RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED
CARE AND MAINTENANCE
- Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
- If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am – 5:00pm EST), or visit us online at www.quoizel.com.
PACKAGE CONTENTS
MOUNTING HARDWARE
PENDANT – OTN1512MBK
INSTALLATION
Install Rod and Fixture Loop
Tighten Hex Nut inside of Ceiling Canopy
Install Fixture Chain
Suggested chain length for Ceiling height
- 8 feet ceiling: use 13 links of chain and 2 quick links
- 9 feet ceiling: use 23 links of chain and 2 quick links
- 10 feet ceiling: use 33 links of chain and 2 quick links.
Pull Supply Wires
- Pull the supply wires with ground wire through the chain alternate links.
Install Crossbar
Wiring
Install Ceiling Canopy to Crossbar
Install Glass Shade and Bulb
- Install the correct bulb referring to fixture markings and/or labels for maximum wattage.
Recommended Bulb Type (not included):
Your installation is now complete! Restore electricity and save this sheet for future reference.
IMPORTANT: This CONVERTIBLE fixture can be mounted as pendant light or semi-flush light. DO NOT CUT SUPPLY WIRES if you intend to use it as pendant light.
SEMI-FLUSH – OTN1712MBK
- Set aside Fixture Loop , Rod, Quick Link and Fixture Chain since they are not required for the semi-flush installation.
INSTALLATION INSTRUCTIONS
Remove Loop from Ceiling Canopy
- Set aside the Loop with nipple since they are not required for the semi-flush installation.
Install Ceiling Canopy to Socket Assembly
Install Crossbar
Wiring
- Cut supply wires and leave approximately 8″ from ceiling canopy.
Install Ceiling Canopy to Crossbar
Install Glass Shade and Bulb
- Install the correct bulb referring to fixture markings and/or labels for maximum wattage.
Recommended Bulb Type (not included)
Your installation is now complete! Restore electricity and save this sheet for future reference.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>