ergotron 98-468 CareFit Printer Bracket User Guide
- June 4, 2024
- ERGOTRON
Table of Contents
CareFitTM Printer Bracket for Wall Track
User Guide
Determine mounting location:
Align bracket with a slot in cable cover.
For the latest User Installation Guide please visit:
www.ergotron.com
For Warranty visit:
www.ergotron.com/warranty
For Service visit: www.ergotron.com
For local customer care phone numbers visit: http://frontart.ergotron.com
NOTE: When contacting customer service, reference the serial number.
www.ergotron.com
USA: 1-800-888-8458
Europe: +31 (0)33-45 45 600
China: 400-120-3051
Japan: japansupport@ergotron.com
© 2021 Ergotron, Inc. All rights reserved. CareFit” is a registered trademark
of Ergotron, Inc.
While Ergotron, Inc. makes every effort to provide accurate and complete
information on the installation and use of its products, it will not be held
liable for any editorial errors or omissions (including those made in the
process of translation from English to another language), or for incidental,
special or consequential damages of any nature resulting from furnishing this
instruction and performance of equipment in connection with this instruction.
Ergotron, Inc. reserves the right to make changes in the product design and/or
product documentation without notification to its users. For the most current
product information, or to know if this document is available in languages
other than those herein, please contact Ergotron. No part of this publication
may be reproduced, stored in a retrieval system, or transmitted in any form or
by any means, electronic, mechanical, photocopying, recording, or otherwise
without the prior written consent of Ergotron, Inc.,1181 Trapp Road, Eagan,
Minnesota, 55121, USA Patents Pending and Patented U.S. & Foreign. Ergotron is
a registered trademark of Ergotron, Inc.
888-98-217-W-00 rev. B • 04/22
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>