TOURATECH 09-403-5864-0 Brake and Clutch Lever Instruction Manual
- June 4, 2024
- Touratech
Table of Contents
TOURATECH 09-403-5864-0 Brake and Clutch Lever
We recommend having the accessory parts fitted by a specialist workshop.
- Caution
- Note
- Warning
- Liquid
- Torque
- Template
- 2 Persons
- Original motorcycle part
M 4 2,7
M 5 5,5
M 6 9,7
M 8 23,0
M l0 47,0
M12 80,0
M14 130,0
M16 196,0
M 18 270,0
M20 385,0
0,8 Nm
1,7 Nm
7,9 Nm
14,0 Nm
24,0 Nm
-,- Nm
59,0 Nm
-,- Nm
114,0 Nm
These instructions are written based on our current stale of knowledge. Information is provided without any guarantee as to its accuracy. Subject lo technical modifications.
The order of assembly steps must be followed.
Touratech accepts no liability for incorrectly fitted ports and resulting material damage or personal injury!
Please observe applicable road vehicle (construction and use) regulations as
well as
EC/ECE Directives and applicable laws in your country. If parts are fitted
which require inspection and/ or approval after filling, lake your vehicle to
a testing station immediately and have the vehicle papers updated.
Check and if necessary tighten all bolted connections after 50 km.
Standard tightening torques in Nm for bolted connections with strength class
8.8.
For special tightening torques refer to your specialist workshop!
Please take into account that fitting panniers, crash bars, foot peg lowering
kits (rider
and pillion),Kickstand enlargement plate, front spoilers and engine guards may
restrict the bike’s lean angle!
If modifications are mode to the fairing, stem, handlebar, fairing parts, etc., ensure that electrical wiring, brake lines, accelerator and clutch cables are refitted correctly.
Check clearance, both sides with full steering lock .
Always disconnect the battery when working on the electrics!
We recommend cutting protective film to size and applying it to impact areas that are likely to be chipped by stones.
Work on the brake system and suspension should always be carried out by a specialist workshop.
The maximum load on luggage rocks is 5 kg! Luggage racks ZegoPro TC is 10 kg!
If other original accessories or aftermarket accessories are used, ensure clearance, fitment and do not come into contact with other parts!
Apply conventional lubricant to stainless steel bolts prior to assembly.
PDF fitting instructions a lso can be downloaded from the Touralech webshop.
Mounting instructions
01-402-5861-0 Touratech Suspension Federbein fur Honda CRFl 000L Africa Twin ab 2018 Typ Level2/PDS
01-402-5861-0 Touratech Suspension Federbein fur Honda CRFl 000L Africa Twin ab 2018 Typ Level2/PDS
01-402-5861-0 Touratech Suspension Federbein fur Honda CRFl 000L Africa Twin ab 2018 Typ Level2/PDS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>