PHOEBE LED 14664 Smart Relay Switch User Guide
- June 4, 2024
- PHOEBE LED
Table of Contents
PHOEBE LED 14664 Smart Relay Switch
Smart Relay Switch
Setup Wifi and App Controlled
- Disconnect power by circuit breaker
- Check the line with voltage tester pen, make sure the power is off to prevent electric shock
- Follow wiring diagram and check for short circuits
- Connect circuit breaker and restore power
Safety Warning
To avoid the risk of fire, electrical shock or injury, we recommend that
installation is carried out by a qualified electrician.
Max load (Do not exceed max load on device) Traditional lamps 600W max,
LED and Fluorescent lamps 400W max.
Before use please carefully read wiring instructions. Before commencing any
electrical work ensure power supply is switched off at the mains. Either by
switching off the consumer unit or by removing the appropriate fuse. Wiring
should be in accordance with the latest IEE regulations (BS 7671).
App Set-up
- Download the Tuya Smart App from Google Play or the Apple App Store
- Connect your smart device to a 802.11 b/g/n 2.4GHz network
- Launch the Tuya App
- Power on after completion of wiring and the device is turned on by default. Press and hold the button for about 3-5 seconds until the WIFI blue LED blinks fast
- Select add device (Manually or auto detect) and choose “Socket (Wi-Fi)” from device type
- Follow the Tuya app on-screen instructions for step by step new device set-up
Voice Control
The Smart Relay Switch can be controlled by voice control via the Tuya App or
Smart Home Hub.
To connect your Smart Relay Switch to your home hub please follow your home
hub set-up instructions for adding a new Tuya Smart Device.
Crompton Lamps Limited registered in England and Wales No. 05590551 Registered
office and correspondence address: Unit 2, Marrtree Business Park, Bowling
Back Lane, Bradford BD4 8QE
Tel: +44 (0)1274 657 088
Fax: +44 (0)1274 657 087
Email: [email protected]
Web: www.cromptonlamps.com