Yorkville EXM Pro SUB Portable Subwoofer Owner’s Manual

Yorkville EXM Pro SUB Portable Subwoofer

Product Information

The EXM Yorkville is a battery-powered portable subwoofer with BluetoothTM connectivity. The product is identified by the model number EXMPROSUB and is intended for indoor use only. The product comes with an owner’s manual that contains important safety instructions, information on power sources, hazards, cleaning, and packaging.

Product Usage Instructions

Before operating the unit, read and understand the owner’s manual, and save it for future reference. Here are some guidelines to follow when using the EXM Yorkville:

• Do not expose the product to rain or moisture.
• Clean the product only with a dry cloth.
• Use only attachments/accessories specified by the manufacturer.
• Do not stack the product vertically.
• Do not place the product on an unstable cart, stand, tripod, bracket, or table.
• When installing the product, follow the manufacturer’s instructions and use mounting accessories recommended by the manufacturer.
• Equipment that is suspended overhead must use a secondary safeguard to prevent personal injury in the event the primary mounting mechanism fails.
• Prolonged use of headphones at a high volume may cause health damage to your ears.

Regarding power sources:

• Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Regarding hazards:

• The product may fall, causing serious personal injury and serious damage to the product. Use only with cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product.

Regarding safety instructions:

• Installed battery packs shall not be exposed to excessive heat such as sunshine, fire, or the like.
• Refer servicing to qualified service personnel. Do not attempt to service the product yourself.

Follow all instructions pertaining to a risk of fire, electric shock, or injury to a person. Heed all warnings.

Keep the box and packaging materials in case the unit needs to be returned for service.

IMPORTANT SAFETY INSTRUCTIONS

• This lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• The DO NOT STACK symbol is intended to alert the user that the product shall not be vertically stacked because of the nature of the product
• The exclamation point within an equilatereal triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
• CAUTION: OVERHEAD LOAD
• NOT TO BE SERVICED
• CAUTION: HOT SURFACE
• SEPARATE

FOLLOW ALL INSTRUCTIONS

Instructions pertaining to a risk of fire, electric shock, or injury to a person

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS DEVICE IS FOR INDOOR USE ONLY!
INSTALLED BATTERY PACKS SHALL NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS SUNSHINE, FIRE OR THE LIKE.

• Read Instructions: The Owner’s Manual should be read and understood before operation of your unit. Please, save these instructions for future reference and heed all warnings.
• Cleaning: Clean only with dry cloth.
• Packaging: Keep the box and packaging materials, in case the unit needs to be returned for service.
• Warning: To reduce the risk or fire or electric shock, do not expose this apparatus to rain or moisture. Do not use this apparatus near water!Warning: When using electric products, basic precautions should always be followed, including the following:

Power Sources

Your unit should be connected to a power source only of the voltage specified in the owners manual or as marked on the unit. This unit has a polarized plug. Do not use with an extension cord or receptacle unless the plug can be fully inserted. Precautions should be taken so that the grounding scheme on the unit is not defeated. An apparatus with CLASS I construction shall be connected to a Mains socket outlet with a protective earthing connection. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Hazards
Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious personal injury and serious damage to the product. Use only with cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. Only use
attachments/accessories specified by the manufacturer.

• Equipment that is suspended overhead must use a secondary safeguard to prevent personal injury in the event the primary mounting mechanism fails. Safety eyebolts attached to the equipment and galvanized steel wire can be used together to implement a failsafe mounting thus ensuring the safety of the equipment and anyone positioned below the equipment.
• Improper installation can result in bodily injury or death. If you are not qualified to attempt the installation get help from a professional structural rigger.
• Note: Prolonged use of headphones at a high volume may cause health damage to your ears.
• The apparatus should not be exposed to dripping or splashing water; no objects filled with liquids should be placed on the apparatus.
• Terminals marked with the “lightning bolt” are hazardous live; the external wiring connected to these terminals require installation by an instructed person or the use of ready-made leads or cords.
• Ensure that proper ventilation is provided around the appliance. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.

Power Cord

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. The AC supply cord should be routed so that it is unlikely that it will be damaged. Protect the power cord from being walked on or pinched particularly at plugs. If the AC supply cord is damaged DO NOT OPERATE THE UNIT. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. The mains plug of the power supply cord shall remain readily operable.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Service

The unit should be serviced only by qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, requires battery pack replacement or has been dropped. Disconnect power before servicing!

IMPORTANT SAFETY INSTRUCTIONS

The Lightning Flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prongs are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING:

• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.
•  To completely disconnect this apparatus from the ac mains, disconnect the power supply cord plug from the ac receptacle.
• The mains plug of the power supply cord or appliance coupler shall remain readily accessible.

CAUTION
TO PREVENT ELECTRIC SHOCK HAZARD, DO NOT CONNECT TO MAINS POWER SUPPLY WHILE GRILLE IS REMOVED.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Introduction

The EXM ProSUB is a lithium-ion battery-powered subwoofer. An easy-to-setup addition
to any P.A., the EXM ProSUB extends the bass of a typical sound system with the least amount of complication.

Configuration

The Yorkville Sound EXM ProSUB may be used in several different configurations. The basic system is a single EXM ProSUB used with a pair of full-range loudspeakers, typically the Yorkville Sound EXM Mobile/Mobile8/Mobile12. Multiple EXM ProSUBs can also be used along with multiple full-range enclosures if more bass output is required. The EXM ProSUB accepts and combines signals from stereo line-level sources and mono sources.
Multiple EXM ProSUBs can be daisy-chained through the Link jacks while full- range loudspeakers will be fed a properly filtered signal from the High Pass Output jacks.

*Note: Use corresponding Input and High Pass Output

image-exmmobileSUB-configurations-00-1v0

Bluetooth

The Yorkville EXM ProSUB is capable of Bluetooth™ audio streaming from devices such as smart phones, tablets and laptops. Pairing your device with an EXM ProSUB is simple and gives you the freedom to play your music wirelessly.
The EXM ProSUB also supports wireless stereo pairing between two EXM ProSUB units. One unit will act as the “Primary” unit, playing the left channel of the audio and maintaining the connection to your device, while the other unit will act as a “Secondary” unit, playing the right channel. You only need to connect your device to the Primary EXM ProSUB unit to enjoy high quality wireless stereo playback. See “Stereo Mode” below.

Bluetooth™ Operation
When the EXM ProSUB is powered on, Bluetooth™ will be disabled by default. To enable it and connect to your device, simply tap the Bluetooth™ button. If a device was previously connect-ed to the EXM ProSUB, it will attempt to automatically reconnect. Similarly, if a wireless stereo connection was previously established, both EXM ProSUB units used will attempt to automati- cally re-establish the wireless stereo connection (in the same Primary or Secondary role they previously performed).

Pairing
To pair your device to an EXM ProSUB, simply press the Bluetooth™ button down and hold for 4 seconds, then release the button.

Status
The blue status indicator alerts let you know the current status of the Bluetooth™ con-nection as described in this chart:

Mode Standalone| Linked

ON

| Link-Back

ON, blinks 1x every 2 seconds.

| Standby

Flashes 1x every 2 seconds

| Pairing

Flashes 2x per second

| Stereo Grouping

N/A

| Grouped
---|---|---|---|---|---|---
Stereo Primary| ON| ON, blinks 1x every

2 seconds.

| Flashes 2x every 2

seconds

| Flashes 3x per

second

| Double flash| ON
Stereo Secondary| ON| N/A| N/A| N/A| Double flash| Slow flash

Level Control
Streamed music volume can be changed only via the connected Bluetooth™ device.

Stereo Mode
The EXM ProSUB supports wireless stereo playback between two EXM ProSUB cabinets, for an enhanced listening experience. One cabinet will act as the Primary unit, while the other acts as a Secondary unit. The Primary unit will play the left audio channel of streamed music, and also maintain the Bluetooth™ connection with your device, while the Secondary unit will play the right audio channel. Your device only connects to the Primary unit, not the Secondary.
To enable Stereo Mode, simply double-tap the Bluetooth™ button on the EXM ProSUB that should act as the Primary unit (left channel), then double tap the Bluetooth™ button on the other EXM ProSUB (right channel). The order matters, as the first unit double tapped will become the Primary unit (left channel). Both EXM ProSUB units will automatically attempt to re-establish the
Stereo Mode connection the next time they are powered on and enabled, with the same Primary and Secondary roles previously used. You can still pair new devices to an EXM ProSUB Primary unit if it is in Stereo Mode. Pairing a device to an EXM ProSUB that is in Secondary mode will end the stereo wireless connection.

Button Operation

• Single Tap – Enables Bluetooth™
• Double Tap – Enter Stereo Mode
• Press and Hold (4 seconds) – Enter Pairing Mode
• Press and Hold (8 seconds) – Disables Bluetooth™

Range
The EXM’s Bluetooth™ operating range is rated for 10 meters (33 feet) line of sight. The quality of the link can be affected by an excess of traffic in the 2.4 GHz bandwidth or structures between the Bluetooth™ unit and the streaming device. Note: When connected with Bluetooth™, ALL audio is streamed from your device. If you don’t want your streaming music to be interrupted, turn off ‘notifications’ on your device

Input Jacks
The input jacks on the EXM ProSUB can be fed with mono or stereo from your source. It is best that the audio source go directly to the EXM ProSUB and then looped to your full range loudspeakers through the High Pass Output jacks, this ensures there’s an ideal crossover to the full-range loudspeaker. For mono signals, the Left or Right jack will accept a ¼-inch or XLR cable. When using stereo signals, the EXM ProSUB’s mono output will sum the Left and Right signals internally. Note: stereo separation is maintained for signals leaving the High Pass Output jacks.

Sub Level Control
The EXM ProSUB Sub Level control sets the amount of bass added to the sound system by the EXM ProSUB. This adjusts for the relative sensitivity of the companion full-range speakers and the desired system frequency response. This control is best set by listening while operating at a moderate level (i.e. before the onset of limiting) and then not changing it. A setting of 0 dB on the EXM ProSUB Sub Level control is the best starting point when setting up a sound system. From there, adjustments can be made to achieve the best sound. Note: The 0 dB mark refers to the setting that will give full power when the line input is used and the input signal is at a level of 0 dBV (1 Vrms).

High Pass Output Jacks
The High Pass Output jacks are provided to eliminate the need for an external crossover, use these jacks to feed the input of your powered full-range loudspeakers. The output signal of these XLR jacks has had the audio below 100 Hz removed, helping to achieve a flat system response when feeding the full- range loudspeakers.

Full Range Output Jack
The Full Range Output jack can be used to send the full range source signal (mono/summed) to additional EXM ProSUBs or other powered enclosures that do not require a stereo source.

Protection and Indicators
The EXM ProSUB has circuitry to help prevent amplifier clipping, over- excursion and to protect the amplifier and/or voice coil from overheating. At high levels the internal limiter will limit the gain of the EXM ProSUB. This is to ensure the desired low frequency balance prior to limiting.

Battery Status Indicators
The EXM Mobile/Mobile12 has a series of four LEDs to indicate the approximate charge level. The upper green LED is illuminated if there is greater than 75% charge in the battery. The red LED only will indicate that the battery is critically low (approximately
10% remaining) and needs immediate charging. The indicators will be engaged only when the power switch is turned on.

Charging Indicator
Whenever AC is connected to the unit, the charging indicator will be turned on. If it is green, the
unit is fully charged. If it is red, the unit is in the process of charging.

Charging the EXM ProSUB
To charge the EXM ProSUB, plug it into an AC power source using the included power cord. The charging indicator LED is the best indication of the charging status; even if all of the battery status LEDs are lit, there is still possibly some additional charging time required. The EXM ProSUB can be safely left connected to AC power for charging indefinitely. It will intelligently control its own charging regime when plugged in long-term.
The EXM ProSUB will not charge when the temperature is below 0° C or above 45° C.
If the EXM ProSUB is going to be stored unused for a long period of time (greater than 6 months) it is advisable to periodically plug it in to charge up the battery.
If the EXM ProSUB has been stored for a long period of time unused and it has not been maintained,
it is advisable to connect the charger and leave it plugged in for approximately 24 hours.

Specifications

• Active or Passive Active
• Program Power (watts) 500 watts, program (800 watts, peak)
• Measured Max SPL (C-Weighted, Max Hold) 122dB Continuous, 128 dB Peak
• Frequency Response (Hz +/- 3dB) 47Hz-100Hz
• Crossover Frequency (Hz) 100 Hz Lowpass
• Cabinet Configuration Bass Reflex
• Driver Configuration 2x 10-inch LF woofer
• LF Driver(s) 2×10-inch Neo with 2-inch Voice Coil
• LF Impedance (ohms) 4 ohm Load (2x 8 ohm in Parallel)
• LF Protection Excursion, Voice Coil Thermal (RMS)
• LF Amplifier Type Class D
• Cooling Scheme Convection
• Power Cable Yes
• Power Switch Yes
• Power Consumption 150VA
• Inputs 2x (L&R) XLR / ¼-inch Combi-jack, Bluetooth™, 3.5mm Stereo,
• Outputs 2x XLR (L&R)High Pass Out, XLR Full Range Mix Out
• Level Controls Sub Level
• Limiter Excursion, Thermal (RMS), Clipping
• LED Indicators Power, Bluetooth™, Battery Level, Charging Status, Clip
• Enclosure Materials 15 mm Birch Plywood
• Stacking Feature Interlocking Rubber Feet (top/bottom)
• Covering / Finish ABS Laminated
• Dimensions (DWH, inches) 20/15.5/27
• Dimensions (DWH, cm) 51/39/60
• Weight (lbs/kg) 67/30.5

Block Diagram for EXM ProSUB

DESIGNED & MANUFACTURED BY YORKVILLE SOUND

Two & Ten Year Warranty

Unlimited Warranty
Yorkville’s two and ten-year unlimited warranty on this product is transferable and does not require registration with Yorkville Sound or your dealer. If this product should fail for any reason within two years of the original purchase date (ten years for the wooden enclosure), simply return it to your Yorkville dealer with original proof of purchase and it will be repaired free of charge. This includes all Yorkville products, except for the YSM Series studio monitors, Coliseum Mini Series and TX Series Loudspeakers.
Freight charges, consequential damages, weather damage, damage as a result of improper installation, damages due to exposure to extreme humidity, accident or natural disaster are excluded under the terms of this warranty. Warranty does not cover consumables such as vacuum tubes or par bulbs. See your Yorkville dealer for more details. Warranty valid only in Canada and the United States.

Canada
Voice: 905-837-8481 Fax: 905-839-5776

U.S.A.
Voice: 716-297-2920 Fax: 716-297-3689

www.yorkville.cowww.yorkville.comm

Yorkville Sound Inc.
4625 Witmer Industrial Estate Niagara Falls, New York 14305 USA

U.S.A.
Yorkville Sound Inc.
4625 Witmer Industrial Estate Niagara Falls, New York 14305, USA
Voice: 716-297-2920
Fax: 716-297-3689

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>