Aseptico ATC-03CF Tray Stand User Manual

Aseptico ATC-03CF Tray Stand

Product Information

The Aseptico ATC-03CF Command Air Portable Tray Stand is a portable and lightweight field system that includes a standard instrument tray with a tripod stand. It is designed to be used with the ADC-01CS Command Air Portable Dental Chair and can be easily deployed. The tray stand comes with a soft padded carrying case for both the tray and tripod stand, making it convenient to transport. The tray stand features a molded support and a stainless-steel tray that measures 14 x 9.75 inches. The tripod stand is height adjustable, with a folded size of 26 x 4 x 3.5 inches and an open size of 25 x 25 x 29 to 57 inches. The tray stand weighs 2.4 lbs without the carrying case and 2.85 lbs with the carrying case, while the tripod stand weighs 5.25 lbs without the carrying case and 5.65 lbs with the carrying case.

Product Usage Instructions

1. Remove the tray and stand from the carrying cases.
2. Unfold the tripod legs and slide them to the base of the center column. Secure them with the thumbscrew and set them on the floor.
3. Line up the mounting holes on the far end of the molded tray support with the mounting block and thumbscrews on the telescoping center column. Tighten the thumbscrews to secure the molded tray support to the center column.
4. Place the stainless steel tray on top of the molded tray support.
5. Turn the telescoping center column adjustment counterclockwise to loosen it, set the column to the desired height, and then turn it clockwise to secure it.

Note: that the tray stand is covered by a limited warranty. Expendable components such as batteries, fuses, light bulbs, and tubing sets installed on Aseptico products are specifically excluded and have no warranty. Consumable goods are warranted for the stated expiration date of such goods. Repair or replacement of any product(s) or part(s) under this warranty does not extend the term of this warranty.

WARRANTY

Aseptico Inc. warrants its new products against defects in material and workmanship under normal and proper use, care, and maintenance for a period of two (2) years from date of original invoice. This two (2) year warranty does NOT apply nor is it extended to products that are not manufactured by Aseptico. These products may be covered by a separate limited warranty provided by the particular manufacturer, and all claims and questions regarding the same are to be directed to the particular manufacturer. Expendable components, such as batteries, fuses, light bulbs, and tubing sets installed on Aseptico products are specifically excluded and have no warranty. Consumable goods are warranted for the stated expiration date of such goods. Repair or replacement of any product(s) or part(s) under this warranty does not extend the term of this warranty, and such product(s) or part(s) shall remain covered by the unexpired portion of the warranty period, or for ninety (90) days from the date of return to Aseptico, whichever is later. This limited warranty applies only to the initial or first installation of the product or part. During the specific warranty periods set forth above, Aseptico will, at its option, repair or replace the product(s) or particular part(s) that are found to be defective in either material or workmanship in part or whole. Aseptico shall be the sole arbiter of such action. In the event of alleged defect under warranty, the purchaser is to notify Aseptico’s Customer Service department promptly. Customer Service will provide Return Material Authorization (RMA) instructions, usually directing that the product be returned for service, shipping prepaid by the buyer or end user, to Aseptico or its designated and authorized warranty service center. This warranty shall not apply to products (1) that have been subjected to neglect, abuse, misuse, improper installation, inadequate maintenance, or damage due to improper use of cleaning materials or chemicals, or non-compliance with Aseptico’s storage, installation, operation, maintenance or environmental requirements; (2) that have undergone any modification or repair not previously authorized by Aseptico in writing, or service, repair or modification by or from any facility other than an authorized Aseptico service center or technician, or that use non-authorized software or spare or replacement parts; or (3) that fail due to reasonable and normal use or wear and tear, or materials made, furnished or specified by the buyer or end user. Aseptico does not assume under this warranty any risks or liabilities arising from the clinical use of its products, whether or not such use involves coincidental utilization of products manufactured by others. Under no circumstances will Aseptico be liable or responsible for special, compensatory, incidental, consequential or punitive damages, lost profits, lost sales, or loss of use or loss of business opportunity by or through the use of the product. Aseptico’s sole and maximum liability with respect to the product, other than its obligations set forth above, shall be the total purchase price paid for the product.

PURPOSE

The Aseptico ATC-03CF Command Air Portable Tray Stand is a lightweight, heavy- duty field system that includes a standard instrument tray with a tripod stand. This tray stand is highly portable and will fit in the mil-spec hard shell case included with the ADC-01CS Command Air Portable Dental Chair for easy deployment.

PERFORMANCE CHARACTERISTICS:

Tray and Molded Support:

• Size: 14” x 9.75”
• Weight without carrying case: 2.4 lbs
• Weight with carrying case: 2.85 lbs
• Tripod Stand:
• Size (folded): 26” x 4” x 3.5”
• Size (open): 25” x 25” x 29” to 57” (Height adjustable)
• Weight without carrying case: 5.25 lbs.
• Weight with carrying case: 5.65 lbs.

ITEMS FURNISHED

• One (1) AA-50 Tray and Molded Support
• One (1) Tripod Stand
• One (1) Soft padded tray carrying case
• One (1) Soft padded tripod stand carrying case
• One (1) Operation and Maintenance Manual

SET-UP:

1. Remove tray & stand from carrying cases. Unfold tripod legs, slide to the base of the center column, and secure with a thumbscrew. Set on the floor.
2. Line-up mounting holes on the far end of the molded tray support with the mounting block and thumbscrews on the telescoping center column. Tighten thumb screws to secure molded tray support to the center column.
3. Place stainless steel tray on top of molded tray support. Turn the telescoping center column adjustment counterclockwise to loosen, set the column to the desired height, then turn clockwise to secure.

PARTS LIST

• Aseptico ATC-03CF Command Air Portable Tray Stand
• P.O. Box 1548
• Woodinville, WA 98072-1548
• 1-800-426-5913
• 425-487-3157
• Fax: 360-668-8722
• email: [email protected].
• Internet: www.aseptico.com.
• P.O. Box 1548
• Woodinville, WA 98072-1548
• 1-800-426-5913
• 425-487-3157
• Fax: 360-668-8722
• email: [email protected].
• Internet: www.aseptico.com.
• P/N 420271 Rev. C ECO 15499 04/2022

References

• Aseptico Inc | Dental Motors, Portable Dental Equipment, OEM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>