Hotron R-C-RSN-WHD4 ClearGuard Wireless Automated Toilet Door Switch Set Instruction Manual
- October 30, 2023
- Hotron
Table of Contents
ClearGuard
Wireless Automated Toilet Door Switch Set
Instruction Manual
Thank you for purchasing the Hotron Clear Guard switch.
The Clear Guard switch is designed to help automate access to public toilets
for people who ordinarily would require assistance.
Specifications
| Set | Receiver (CG-Rx) | 1 EA |
|---|---|---|
| Internal Switch (CGI-Tx) / External Switch (CGE-Tx) | 1 Each | |
| Power Connector (Gray) | 1 EA | |
| Output Contact Point Connector (Yellow) | 1 EA | |
| Screw | 2 EA (3 X 8 size) | |
| Double-sided Tape | 2 EA | |
| Battery | 1.5V AAA Size 8 EA | |
| Manual | 1 Copy | |
| HEX Screw driver | 1 EA (2mm) | |
| Spec | Receiver (CG-Rx) | Internal Switch (CGI-Tx) / External Switch (CGE-Tx) |
| Power | DC12-30V/AC12-24V | Rated Frequency |
| Relay Contact Capacity | 1A/30VDC, 0.5A/125VDC | Battery |
| Operating Temp | -20 C-50 (‘ | Operating Temp |
| Product Size | 150x43x25mm | Product Size |
| Current Consumption | Stancby. 3CrnA/ Operation: 8CrnA(for DC24V) | |
| International Protection | I P65 |
General Information
Operation Check & Caution
- Input DC12~30V/AC12-24V for power supply. Make sure power LED is on.
- Put AAA size batteries into the internal & external switches.
- Register the internal & external switches with the receiver.
- Ensure the receiver (CG-Rx) is wired correctly.
- Immediately change the batteries when aural alert is heard.
- Athough the CGI-Tx and CGE-Tx are IP65 water resistant, excessive water can cause damage to the internal components.
User Manual
-
ID Registration
Ensure the Receiver is powered up and press and hold the open or close button on the Internal or External switch whilst pressing the Register/Delete button on the Receiver.
When pairing is successfully executed, “DOOR IS OPENING” will be heard. -
ID Deletion
Power on the receiver and press the register/delete button for more than 10 seconds.
The buzzer sounds and your ID is deleted successfully. -
Press the blue door open button on the external switch to enter the toilet.
Once inside, press the red door close button to lock the door.
The occupied symbol (Add image of lock here)will illuminate on the external switch if entry is attempted whilst the toilet is occupied. -
Emergency Open
Keep pressing the open button on the external switch until the word “ Occupied” is heard 10 times. -
Setting the Door Hold Open Time (Default : Manual)
Dip Switch| Time| Dip Switch| Time
---|---|---|---
| After 3 s close the door| | After 15 min, close the door
| After 15 s close the door| | Manual (Toggle) open or close by pressing button -
Voice Language Selection
Dip Switch (Default : ENG) -
Switch Operation Announcement
The door will automatically open one hour after it has been closed from the inside.