tp-link Tapo C420S1 Smart Wire-Free Security Camera System Owner’s Manual

tp-link Tapo C420S1 Smart Wire-Free Security Camera System

Product Information

The Tapo C420S1 is a smart and secure wire-free security camera system that comes with a rechargeable and removable battery which extends usage with a low-power protocol. This camera system offers full-color and sharp views day and night, rain or shine with its full-color night vision feature. The camera system also comes with a smart AI detection and notification feature that identifies people, pets, and vehicles, notifying users as needed. The Tapo C420S1 is equipped with a starlight sensor that provides clearer videos and photos with 1.7 times more pixels than 1080p. The camera system has a 180-day battery life based on TP-Link’s laboratory testing with 10-20 triggered events per day. Actual battery life may vary based on device settings, use, and environmental factors. The Tapo C420S1 is IP65 weatherproof, which helps it perform well even in harsh environments with rain and dust. The camera system also offers two-way audio communication through a built-in microphone and speaker. Users can save recorded videos on the hub-installed microSD card (up to 256 GB) or by using Tapo Care cloud storage services.

Product Usage Instructions

1. Remove the camera from the packaging.
2. Download the Tapo app on your smartphone or tablet.
3. Follow the instructions on the app to set up the hub.
4. Insert the microSD card into the hub and initialize it within the Tapo app.
5. Press the SYNC button on the hub to pair with the camera or silence the hub when it rings.
6. Press the SYNC/RESET button on the camera for 1 second to pair with the hub.
7. Place the camera in the desired location and adjust it as needed.
8. Use the Tapo app to customize camera settings, such as motion detection sensitivity and sound and light alarm trigger.
9. Use the Tapo app to view live footage, recorded videos, and receive notifications when motion is detected.
10. Users can communicate through the built-in microphone and speaker by pressing the microphone icon on the live footage screen.
11. To reset the camera, press and hold the SYNC/RESET button for about 5 seconds.

Model : Tapo C420S1
Smart. Secure. Easy

• Full-Color Night Vision
• Starlight Sensor
• Smart AI Detection and Notification
• IP65 Weatherproof

Highlight

• Full-Color in the Night
• Offer full-color and sharp views day and night, rain or shine.
• Smart AI Detection and Notification
• Smart AI identifies people, pets, and vehicles, notifying users as needed.

Features

• 2K QHD
  Now with 1.7 times more pixels than 1080p, providing clearer videos and photos.

• 180-Day Battery Life*
  The rechargeable and removable battery with a low-power protocol extends your usage.

• Wire-Free Placement
  No wires means you can place the cameras almost anywhere inside or outside – whatever works for you!

• Sound and Light Alarm
  Trigger sound and light as an alarm when motion is detected.

• Two-Way Audio
  Enables communication through a built-in microphone and speaker.

• IP65 Weatherproof
  Helps Tapo C420S1 perform well even in harsh environments with rain and dust.

• Flexible Storage Choices
  Save recorded videos on the hub-installed microSD card* (up to 256 GB) or by using Tapo Care** cloud storage services.

Specifications

Camera

• Image Sensor: 1/3“
• Resolution: 2K QHD (2560 × 1440 px)
• Night Vision: 850 nm IR LED up to 49 ft/15m
• Lens: F/NO: 1.61±10%; Focal Length: 3.18mm±5%
• View Range: 113°

Audio

• Audio Communication: 2-way audio
• Audio Input & Output: Built-in microphone and speaker Video
• Video Compression: H.264
• Frame Rate: 15/20 fps
• Video Streaming: 2K QHD
• Audio Compression: G.711

Activity Notifications

• Input Trigger: Motion detection, Person detection, Pet detection, Vehicle detection.
• Output Notification: Notification,Snapshot(Tapo care),Clips(Tapo care).

Network

• Wireless Protocols: IEEE 802.11b/g/n, 2.4 GHz
• Frequency: 2.4 GHz
• Wireless Security: WPA/WPA2-PSK
• Security: 128 bit AES encryption with SSL/TLS
• Protocol: TCP/IP, ICMP, DNS, HTTPS, TCP, UDP

Hardware

• Camera Adapter Input: 100-240V, 50/60Hz
• Camera Adapter Output: 5.0V, 1.0A
• Camera Typical Power Consumption: 0.928W
• Camera Maximum Power Consumption: 2.39W
• Hub Adapter Input: 100-240V, 50/60Hz, 0.3A
• Hub Adapter Output: 9.0V, 0.85A
• Hub Maximum Power Consumption: 9W
• External Storage: microSD card slot †(Supports up to 256 GB)
• Camera Dimensions (Lx W x H): 4.35 x 2.52 x 2.52in. (110.664.264.2mm)
• Hub Dimensions (L x W x H): 2.8 x 2.8 x 1.2 in. (71.4571.4531.25mm)

180-day battery life is based on TP-Link’s laboratory testing with 10-20 triggered events per day. Actual battery life may vary based on device settings, use, and environmental factors. †microSD card needs to be purchased separately.**Tapo Care needs to be subscribed separately.

Others

• Certification: CE, RoHS, RCM
• Package Contents:
  • Tapo C420 Camera (Battery Included)
  • Tapo H200 Hub
  • USB Adapter
  • USB Adapter Cable
  • DC Power Adapter
  • Mounting Screws
  • Mounting Templates
  • Camera Brackets
  • Quick Start Guide
  • RJ45 Ethernet Cable
• Operating Temperature: -20℃~45℃(-4°F ~113 °F )
• Storage Temperature: -20℃~60℃ (-4°F~140°F)
• Operating Humidity: 10%~90%RH, Non-condensing
• Storage Humidity: 5%~90%RH, Non-condensing

Specifications are subject to change without notice. All brands and product names are trademarks or registered trademarks of their respective holders.
©2023 TP-Link

Device Appearance

Front

1. Spotlights

2. Light Sensor

3. Motion Sensor

4. Status LED
   Indicate the status of your camera.

5. Microphone

6. Lens
   Back

7. SYNC/RESET Button
   While the camera is powered on: Press for 1 second: Pair with the hub Press and hold for about 5 seconds: Reset the camera

Hub Appearance

1. SYNC Button
   Press to pair with the camera, or silence the hub when it rings.

2. RESET
   Use a pin to press and hold for about 5 seconds until the hub LED quickly blinks red to reset the hub.

3. microSD Card Slot
   Insert a microSD card to record camera videos locally. Initialize the microSD card within the Tapo app first. *microSD card not included.

4. Status LED
   Indicate the status of your hub. Notes: Connect up to 4 cameras to a hub.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>