arcelik RHB 6050 Hand Blender with Grater User Manual

arcelik RHB 6050 Hand Blender with Grater

The Hand Blender with Grater is available in three models: RHB 6050, RHB 6050 K, and RHB 6050 S. The product is suitable for contact with food and has a power source of 220-240 V~, 50-60 Hz. The power of the product is 1500 W, and it has insulation II class. The product comes with a motor body, start/turbo button, chopping blade, measuring cup, pushing apparatus, gearbox, gear box button, chopper hopper cover, grater and chopping knives, grater disc, shredding knife, accessory shaft, process chamber, container lock, beater accessory holder, and whisking blade.

Usage Instructions

• First Operation
  Before using the Hand Blender with Grater for the first time, please read the user manual carefully. Make sure that all components are assembled correctly and securely before use.

• Intended Use
  The Hand Blender with Grater is intended for use in personnel kitchen areas in shops, offices and other working areas, ranches,areas used by customers in mobile settings, bedrooms and breakfast locations. The product can be used for blending, whisking, chopping, and grating.

• Blending
  Insert the blending blade into the process chamber. Place the ingredients into the container and attach it to the motor body. Press the start/turbo button to begin blending. For best results,use the start/turbo button intermittently.

• Whisking
  Insert the whisking blade into the accessory shaft. Attach the accessory shaft to the motor body and place the ingredients into the container. Press the start/turbo button to begin whisking. For best results, use the start/turbo button intermittently.

• Chopping
  Insert the chopping blade into the process chamber. Place the ingredients into the container and attach it to the motor body. Press the start/turbo button to begin chopping. For best results, use the start/turbo button intermittently.

• Using the Grater Disc
  Insert the grater disc into the process chamber. Place the ingredients into the container and attach it to the motor body. Press the start/turbo button to begin grating. For best results, use the start/turbo button intermittently.

Important Safety and Environmental Instructions

Children should not use or tamper with the Hand Blender with Grater. Cleaning and user maintenance should not be carried out by children. The product must not be used by children. Follow all safety instructions to prevent hazards that can result in injury or property damage. Any warranty is void if safety instructions are not followed. Do not immerse the appliance, power cord, or plug-in water or any other liquids. The product has a protection class against electric shock, and there is a warning of electric shock. Recycle the product and packaging according to local regulations.

Please read this guide first

Dear Customer,
Thank you for choosing an Arçelik product. We would like you to achieve optimal efficiency from this high-quality product which has been manufactured with the state of the art technology. Please make sure you read and understand this guide and supplementary documentation fully before use and keep it as a reference. Include this guide with the unit if you hand it over to someone else. Observe all warnings and information herein and follow the instructions. Keep in mind that this user guide may apply to several product models. The guide clearly indicates any variations of different models.
Symbols and their Meanings
The following symbols have been used throughout this guide:

• Important information and beneficial advic-es regarding the usage of the device.
• WARNING: Warnings about hazards to life and property.
• Suitable for contact with food.
• Do not immerse the appliance, the power cord or the plug-in water or in any other liq-uids.
• Protection class against electric shock.
• Warning of electric shock.

OVERVIEW

1. Motor body
2. Start/Turbo Button
3. Chopping Blade
4. Measuring cup
5. Pushing Apparatus
6. Gear Box
7. Gear Box Button
8. Chopper Hopper Cover
9. Grater and Chopping Knives
10. Grater Disc
11. Shredding Knife
12. Accessory Shaft
13. Process Chamber
14. Container Lock
15. Beater Accessory Holder
16. Whisking blade

Technical data

The values provided with the appliance or its accompanying documents are laboratory readings in accordance with the respective standards. These values may differ depending on the use and ambient conditions.

Important safety and environmental instructions

This section contains safety instruc-tions to prevent hazards that can result in injury or property damage. Any warranty is void if these instruc-tions are not followed.

General safety

• This appliance complies with international safety standards. This appliance is not designed for commercial use, it is intended for use at home and in similar applications as specified below:
  • In personnel kitchen areas in shops, offices and other working areas,
  • Ranches,
  • Areas used by customers in mo-tels and hotels, and other residential settings,
  • Bedrooms and breakfast locations.
• The appliance may be used by per-sons with limited physical, perceptual or mental abilities or persons with a lack of experi-ence and knowledge if they are supervised or given instructions on the operation of the appliance and any relevant risks they maybe encountered. Children should not tamper with the appliance. Cleaning and user maintenance must not be carried out by chil-dren. This appliance may not be used by children.
• Store the appliance and its elec-trical cord out of the reach of children.
• Do not use the appliance if the power cord, the appliance or the appliance blade is damaged. Contact authorised service.
• Use only original parts or parts recommended by the manufac-turer.
• Do not disassemble the appli-ance.
• Your mains power supply should be in align with the specified information on the type tag of the appliance.
• Do not use the appliance with an extension cord.
• Do not unplug the appliance by pulling on the cord.
• When it is left unattended, be-fore attaching/detaching accessories, or before cleaning, wait for the moving parts to stop and unplug the power cord of the appliance.
• Do not touch the plug of the appliance while your hands are damp or wet.
• Do not use the appliance for hot meals.
• Warning: Your product is equipped with a safety thermic for protection. Your product will automatically stop due to over-heating in long-term use. After a short cooling period, you can restart your appliance.
• Use the appliance only with the provided rubber base and the bowl.
• Do not operate the device for more than 30 seconds without interruption. After starting, let it rest for 3 minutes before using it again. Do not operate the ap-pliance with the empty bowl.
• To avoid damaging the blades and the appliance, remove bones and seeds from foods.
• The appliance is not suitable for dried or rough food that may lead the blades to become blunt very rapidly.
• Follow all warnings to avoid in-juries due to misuse.
• Do not touch the accessories while emptying the container, during cleaning and after use, without stopping the blades and unplugging the product. Handle the chopping blade carefully, trying to hold it only by its plas-tic part.
• After cleaning, dry the appliance and all its components before connecting it to power and in-stalling the components.
• Do not immerse the appliance, the power cord or the plug in water or in any other liquids.
• Do not operate the appliance or its components over or near hot surfaces or do not put on such surfaces.
• If you keep the packaging materials, keep them out of the reach of children.

Compliance with the WEEE regulations and waste disposal

This product does not contain the dangerous and prohibited materials indicated in “Waste Electrical and Electronic Equipment Control Regulation” published by the Ministry of Environment and Urbanisation of the Republic of Turkey. Complies with WEEE Regulations. This product was manufactured from recyclable and reusable high-quality parts and materials. Therefore, do not dispose of this product with other domestic wastes at the end of its life cycle. Take it to a collection point for re-cycling of electrical and electronic equipment. You can ask your local administration about these collection points. You can help protect the environment and natural resources by delivering used products for recycling.
Packaging information

The product’s packaging is made of re-cyclable materials, in accordance with the National Legislation. Do not dispose of the packaging waste with the household waste or other wastes, dispose it to the pack-aging collection areas specified by local authori-ties.
What to do for energy saving
Observe the recommended periods specified in the manual during use. Unplug the appliance after each use.

Operation

First operation
Remove all packaging and labeling materials and dispose of them in accordance with the applicable law. Clean the device before using the device for the first time (see “Cleaning and Care”). Use the appliance in an upright position on a stable, flat, clean, dry and non-slip surface.
Intended use

• This appliance is designed for household use only. It should not be used for commercial purposes.
• Do not use the appliance for any purpose other than its intended use.
• This appliance is intended for slicing and blending food only.
• Unplug the appliance when not in use.
• When you first press the trigger, it switches to the “operating” position, and when you press the trigger all the way, it switches to the “turbo” function.

Blending

Warnings:

• Do not touch the sharp parts of knives with bare hands
• Make sure that the chopping blade is fully seated on the motor unit. Keep the device upright while mixing ingredients in the mixing bowl.

You can use your hand blender to prepare sauces, soups, mayonnaise, baby food, milkshakes, etc.

• Put small pieces of the food you want to puree or blend into the measuring cup (4).
• Attach the chopping blade (3) to the motor body (1) by turning it counter clock-wise until it locks. Plug in the appliance.
• Insert the chopping blade (3) into the measuring cup (4) containing the ingredients and start the device by pressing the low or high-speed start button.
• If the ingredients stick to the sides of the plastic container, remove them with a spatula and continue mixing.
• Turn the appliance off and unplug it.
• Remove the chopping blade (3) from the measuring cup (4).
• Turn the chopping blade (3) clockwise to detach it from the motor unit (1).

Whisking
You can use the whisk attachment to whip cream, egg whites, ready-made dessert batter, etc.

• Fit the whisking blade (16) into the whisker accessory holder (15) so that it clicks into place.
• Attach the whisking blade holder (15) to the motor body (1) by turning it counterclockwise. Plug in the appliance.
• Put the ingredients you want to process into the measuring cup (4).
• Insert the whisking blade (16) into the measuring cup (4) containing the ingre-dients and press and hold the start but-ton (2).
• When finished, release the start button (2) and unplug the appliance.
• Remove the whisking blade (16) from the measuring cup (4). Separate the whisking blade (16) from the motor body (1) by turning it clockwise.

Chopping.

Warnings:

• Do not crush extremely hard ingredients such as coffee beans, ice, coconut, cereals or bones. Remove the stems of the plants, the shell of the walnut, and the bone, nerve and cartilage of the meat.
• You can use it to shred minced meat, cheese, onion, mint and similar herbs, garlic, carrots, walnuts, almonds, prunes, etc.
• Do not touch the blades with bare hands. The blades are very sharp.
• Place the processing chamber (13) on a flat surface.
• Insert the shredding blade (11) into the processing chamber (13).
• Chop large pieces of food into small pieces before putting the ingredients into the processing chamber (13).
• Place the chopper hopper cover and gearbox (6) on the hopper (13).
• Fit the motor body (1) onto the gearbox (6) by turning it clockwise.
• Plug in the appliance and press and hold the start button (2).

Warnings:

• Make sure that the container lock (14) is fully engaged with the chopper hopper lid (8).
• If hot liquid is poured into the hopper, care must be taken as sudden vaporization may occur. Do not put food with a temperature higher than 70°C into the hopper and operate the product for a maximum of 30 minutes with food at this temperature.
• When you first press the trigger, it switches to the “operating” position, and when you press the trigger all the way, it switches to the “turbo” function.
• When finished, release the start button and unplug the appliance from the pow-er outlet.
• To remove the chopper bowl cover (8), first slide the latch (7) on the gearbox to the right and remove the attachment (6). Then press the container lock (14) and remove the hopper lid (8) by turn-ing it.
• Carefully remove the shredding blade (11).

Using the grater disk
You can use the grater and slicer blades to grate and slice ingredients such as cucumber, zucchini, carrot, and eggplant.

• Hold the grater and chopping blade (9) facing upwards and insert it into the grater disc (16).
• Insert the accessory carriage shaft (12) into the fixed shaft in the processing chamber (13) and then insert the grat-er disc (10).
• Then close the chopper hopper cov-er (8).

Hand Blender with Grater / User Manual

• Push gently from the bottom to remove the grater blade (9) from the disk (10).
• A “click” is heard when the chopper bowl lid (8) is fully closed.
• Fit the motor housing (1) onto the gear-box (6) by turning it clockwise.
• Plug in the appliance. Place your food in the feed opening and push it with the pushing attachment (5), press and hold the start button (2) and pass it through the grater.

Warnings:

• Never use your fingers, fork, knife, etc. to push.

• Do not attach the blades (11) to the accessory carrier shaft (12) while grating.
  When finished, wait for the disk (10) to stop and unplug it from the socket.
  To remove the motor housing (1), turn the motor body counterclockwise to re- move it.
  To remove the chopper bowl cover (8), first slide the latch (7) on the gearbox to the right and remove the attachment (6). Then press the container lock (14) and remove the hopper lid (8) by turn-ing it.

• Holding the accessory carriage shaft (12), remove it together with the grater disk (10) and remove your food from the processing bowl (13).

Operation

Holding the accessory carriage shaft (12), remove it together with the grater disk (10) and remove your food from the processing bowl (13).

Cleaning and maintenance

Cleaning
Warnings:

• Never place the gearbox under running water and never put it in the dishwasher.
• Never use gasoline, solvents, abrasive cleaners, metal objects, or hard brushes to clean the appliance.
• Do not touch the chopping blades with bare hands. The blades are very sharp. Use any brush during cleaning!
• Do not place the product body and the power cord in water or other liquids, do not put them under running water and never put them in the dishwasher.
• You can wash the surfaces of the shredder bar that enter the chamber under the tap, but be careful not to get water on the inner surfaces.
• Turn the appliance off and unplug it.
• ait for the appliance to completely cool down.
• Clean the motor unit (3), whisk holder (17) and lockable cover (7) with a damp soft cloth and then wipe dry.

01M-8818941100-1922-06 01M-8818931100-1922-06 01M-8819031100-1922-06

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>