arcelik 583630EI No Frost Refrigerator User Manual
- June 10, 2024
- arcelik
Table of Contents
Refrigerator
User Manual 583650 EI-583630EI
583630EI No Frost Refrigerator
Dear Customer,
Please read this manual before using the product.
Thank you for choosing this product. We would like you to achieve the optimal
efficiency from this high quality product which has been manufactured with
state of the art technology. To do this, carefully read this manual and any
other documentation provided before using the product and keep it as a
reference.
Heed all information and warnings in the user manual. This way, you will
protect yourself and your product against the dangers that may occur.
Keep the user manual. Include this guide with the unit if you hand it over to
someone else.
The following symbols are used in the user guide:
** Hazard that may result in death or injury.
NOTICE A hazard that may cause material damage to the product or its
surroundings
** Important information or useful tips on operation.
Read the user manual.
INFORMATION
The model information as stored in the product data base can be reached by
entering following website and searching for your model identifier (*) found on
energy label.
Safety Instructions
- This section contains safety instructions that will help get protected against risks of personal injury or property damage.
- Our company shall not be responsible for damages that may arise when these instructions are not followed.
Installation and repair procedures must always be performed by the
manufacturer, authorised service agent or a qualified person specified by the
importer.
Only use original parts and accessories.
Original spare parts will be provided for 10 years, following the
product purchasing date.
Do not repair or replace any part of the product unless specified
expressly in the user manual.
**** Do not make any technical modifications to the product.
1.1 Intended Use
This product is not suitable for commercial use and it must not be used out of
its intended use.
This product is designed to be used in houses and indoor places.
For example:
- Personnel kitchens in stores, offices and other working environments,
- Farm houses,
- Areas used by customers at hotels, motels and other types of accommodation,
- Bed&breakfast type hotels, boardinghouses,
- Catering and similar non-retail applications.
This product should not be used outdoors with or without a tent above it such
as boats, balconies or terraces. Do not expose the product to rain, snow, sun
or wind.
There is the risk of fire!
1.2 – Safety for children, vulnerable persons and pets
-
This product can be used by children at and above 8 years old and by persons with limited physical, sensory or mental capabilities or who lack experience and knowledge provided that they are supervised or trained on the safe use of the product and the risks it brings out.
-
Children aged from 3 to 8 years are allowed to load and unload refrigerating products.
-
Electrical products are dangerous for children and pets. Children and pets must not play with, climb or enter the product.
-
Cleaning and user maintenance should not be performed by children unless they are supervised by someone.
-
Keep packaging materials away from children. There is the risk of injury and suffocation!
-
Before disposing of the old or obsolete product:
1. Unplug the product by gripping from the plug.
2. Cut the power cable and remove it from the appliance together with its plug
3. Do not remove the shelves or drawers so that it is harder for children to enter the product.
4. Remove the doors.
5. Keep the product in a way that it will not tip over.
6. Do not allow children play with the old product. -
Never throw the product into fire for disposal. There is the risk of explosion!
-
If there is a lock on the door of the product, the key should be kept out of the reach of children.
1.3 – Electrical safety
- The product must be unplugged during installation, maintenance, cleaning, repairing and moving procedures.
- If the power cable is damaged, it must be replaced by a qualified person specified by the manufacturer, authorised service agent or importer in order to avoid potential dangers.
- Do not squeeze the power cable under or behind the product. Do not place heavy objects on the power cable. Power cable must not be bent excessively, pinched or get in contact with any heat source.
- Do not use extension cords, multi-sockets or adapters to operate the product.
- Portable multi-sockets or portable power sources can overheat and cause fire. Therefore, do not keep any multi-sockets behind or near the product.
- Plug must be easily accessible. If this is not possible, the electrical installation to which the product is connected must contain a device (such as a fuse, switch, circuit breaker, etc.) which conforms to the electrical regulations and disconnects all poles from the grid.
- Do not touch the power plug with wet hands.
- Remove the plug from the socket by gripping the plug and not the cable.
1.4 – Transportation safety
- Product is heavy; do not move it alone.
- Do not hold its door when moving the product.
- Pay attention not to damage the cooling system or the piping during transportation. If the piping is damaged, do not operate the product and call the authorised service agent.
1.5 – Installation safety
-
Call the authorised service agent for installation of the product. To make the product ready for use, check the information in the user manual to make sure that the electricity and water installations are suitable. If they are not, call a qualified electrician and plumber to have the necessary arrangements made. Otherwise, there is the risk of electric shock, fire, problems with the product, or injury!
-
Prior to installation, check if the product has any defects on it. If the product is damaged, do not have it installed.
-
Place the product on a clean, flat and solid surface and balance it with adjustable feet. Otherwise, the product may tip over and cause injuries.
-
The installation location must be dry and well ventilated. Do not place carpets, rugs or similar covers under the product. Insufficient ventilation causes the risk of fire!
-
Do not cover or block the ventilation openings. Otherwise, power consumption increases and your product may get damaged.
-
Product must not be connected to supply systems such as solar power supplies. Otherwise, your product may get damaged due to sudden voltage changes!
-
The more refrigerant a refrigerator contains, the larger the installation location must be. If the installation location is too small, flammable refrigerant and air mixture will accumulate in cases of refrigerant leakage in cooling system. The required space for each 8 gr of refrigerant is 1 m³ minimum. The amount of refrigerant in your product is indicated on the Type Label.
-
Product must not be installed in places exposed to direct sunlight and it must be kept away from heat sources such as hobs, radiators, etc.
If it is inevitable to install the product close to a heat source, a suitable insulation plate must be used in between and the following minimum distances must be kept to the heat source:
– Minimum 30 cm away from heat sources such as hobs, ovens, heater units or stoves,
– Minimum 5 cm away from electric ovens. -
Protection class of your product is Type I. Plug the product in a grounded socket that conforms the voltage, current and frequency values stated on the type label of the product. The socket must be equipped with a 10 A – 16 A circuit breaker. Our company shall not be liable for any damages that will arise when the product is used without grounding and electrical connection in accordance with the local and national regulations.
-
Product must not be plugged in during installation. Otherwise, there is the risk of electric shock and injury!
-
Do not plug the product in sockets that are loose, dislocated, broken, dirty, greasy or bear the risk of getting in contact with water.
-
Route the power cable and hoses (if any) of the product in a way that they do not cause risk of tripping over.
-
Exposing the live parts or power cable to hu- midity may cause short circuit. Therefore, do not install the product in places such as ga- rages or laundry rooms where humidity is high or water may splash. If the refrigerator gets wet with water, unplug it and call the authorised service agent.
-
Never connect your refrigerator to energy sav- ing devices. Such systems are harmful to your product.
1.6- Operational safety
-
Never use chemical solvents on the product. There is the risk of explosion!
-
If the product malfunctions, unplug it and do not operate until it is repaired by the authorised service agent. There is the risk of electric shock!
-
Do not place flame sources (lit candles, cigarettes, etc.) on or close to the product.
-
Do not climb on the product. There is the risk of falling and getting injured!
-
Do not damage the pipes of the cooling system with sharp or penetrating objects. The refrigerant that might come out when the refrigerant pipes, pipe extensions or surface coatings are punctured causes skin irritations and eye injuries.
-
Unless recommended by the manufacturer, do not place or use electrical devices inside the refrigerator/deep freezer.
-
Be careful not to trap your hands or any other part of your body in the moving parts inside the refrigerator. Pay attention not to squeeze your fingers between the door and the refrigerator. Be careful when opening and closing the door particularly if there are children around.
-
Never eat ice cream, ice cubes or frozen food right after removing them from the refrigerator. There is the risk of frostbite!
-
When your hands are wet, do not touch the inner walls or metal parts of the freezer or the food stored therein. There is the risk of frostbite!
-
Do not place tins or bottles that contain car- bonated drinks or freezable liquids in the freezer compartment. Tins and bottles may burst. There is the risk of injury and material damage!
-
Do not place or use flammable sprays, flam- mable materials, dry ice, chemical substances or similar heat-sensitive materials near the refrigerator. There is the risk of fire and explosion!
-
Do not store explosive materials that contain flammable materials, such as aerosol cans, in your product.
-
Do not place containers filled with liquid onto the product. Splashing water on an electrical part may cause electric shock or the risk of fire.
-
This product is not intended for storing medi- cines, blood plasma, laboratory preparations or similar medical substances and products subject to Medical Products Directive.
-
Using the product against its intended purpose may cause the products stored inside it to de- teriorate or spoil.
-
If your refrigerator is equipped with blue light, do not look at this light with optical tools. Do not stare at UV LED lamp directly for a long time. Ultraviolet light may cause eye strain.
-
Do not overload the product. Objects in the refrigerator may fall down when the door is opened, causing injury or damage. Similar problems may arise if any object is placed onto the product.
-
To avoid injuries, make sure that you have cleaned all the ice and water that may have fallen or splashed on the floor.
-
Change the position of the shelves/bottle hold- ers on the door of your refrigerator only when they are empty. There is the risk of injury!
-
Do not place objects that can fall down/tip over onto the product. Such objects may fall down when the door is opened and cause injuries and/or material damage.
-
Do not hit or exert excessive force on glass surfaces. Broken glass may cause injuries and/ or material damage.
-
Cooling system of your product contains R600a refrigerant: Type of the refrigerant used in the product is indicated on the type label. This refrigerant is flammable. Therefore, pay attention not to damage the cooling system or the piping while the product is in use. If the piping is damaged:
– Do not touch the product or the power cable,
– Keep away potential sources of fire that may cause the product to catch fire.
– Ventilate the area where the product is located. Do not use fans.
– Call the authorised service agent. -
If the product is damaged and you see refrigerant leak, please stay away from the refrigerant. Refrigerant may cause frostbite in case of skin contact.
For products with a Water Dispenser/Ice Machine
- Use only potable water. Do not fill the water tank with any liquids -such as fruit juice, milk, carbonated beverages or alcoholic drinks- that are not suitable for use in the water dispenser.
- There is the risk for health and safety!
- Do not allow children play with the wa- ter dispenser or ice machine (Icematic) in order to prevent accidents or injuries.
- Do not insert your fingers or other objects into the water dispenser hole, water channel or ice machine container. There is the risk of injury or material damage!
1.7- Maintenance and cleaning safety
- Do not pull from the door handle if you need to move the product for cleaning purposes. Handle may break and cause injuries if you exert excessive force on it.
- Do not spray or pour water on or inside the product for cleaning purposes. There is the risk of fire and electric shock!
- Do not use sharp or abrasive tools when cleaning the product. Do not use household cleaning products, detergent, gas, gasoline, thinner, alcohol, varnish etc.
- Only use cleaning and maintenance products inside the product that are not harmful for food.
- Never use steam or steam assisted cleaners to clean or defrost the product. Steam gets into contact with the live parts in your refrigerator, causing short circuit or electric shock!
- Make sure that no water enters the electronic circuits or lighting elements of the product.
- Use a clean and dry cloth to wipe the foreign materials or dust on the pins of the plug. Do not use a wet or damp cloth to clean the plug. There is the risk of fire and electric shock!
1.8- HomeWhiz
- When you operate your product through HomeWhiz application, you must observe the safety warnings even when you are away from the product. You must also follow the warnings in the application.
1.9- Lighting
- Call the authorised service when it is required to replace the LED/bulb used for lighting.
Environmental instructions
2.1 Compliance with the WEEE Directive and Disposing of the Waste Product:
** This product complies with EU WEEE Directive (2012/19/EU). This
product bears a classification symbol for waste electrical and electronic
equipment (WEEE).
This symbol indicates that this product shall not be disposed with other
household wastes at the end of its service life. Used device must be returned
to offical collection point for recycling of electrical and electronic
devices. To find these collection systems please contact to your local
authorities or retailer where the product was puchased. Each household
performs important role in recovering and recycling of old appliance.
Appropriate disposal of used appliance helps prevent potential negative
consequences for the environment and human health.
2.2 Compliance with RoHS Directive
The product you have purchased complies with EU RoHS Directive (2011/65/EU).
It does not contain harmful and prohibited materials specified in the
Directive.
2.3 Package information
** Packaging materials of the product are manufactured from recyclable
materials in accordance with our National Environment Regulations. Do not
dispose of the packaging materials together with the domestic or other wastes.
Take them to the packaging material collection points designated by the local
authorities.
Your Refrigerator
1- Freezer compartment door shelves
2- Cooler compartment door shelves
3- Egg Holder
4- Water fountain
5- Legumes dispenser
6- Cooler compartment small door shelves
7- Bottle shelf
8- Adjustable stands
9- Crisper, Crisper separator and ethylene filter| 10- The dairy (cold
storage) compartment
11- Filter
12- Glass shelves
13- Fan
14- Icematics
15- Freezer compartment glass shelf
16- Freezer compartment
17- Cooler compartment
---|---
*****Optional: Figures in this user guide are schematic and may not be exactly match your product. If your product does not comprise the relevant parts, the information pertains to other models.
Installation
4.1 The right place for installation
Your product requires adequate air circulation to function efficiently. If
the product will be placed in an alcove, remember to leave at least 5 cm
clearance between the product and the ceiling, rear wall and the side walls.
If the product will be placed in an alcove, remember to leave at least 5 cm
clearance between the product and the ceiling, rear wall and the side walls.
Check if the rear wall clearance protection component is present at its
location (if provided with the product). If the component is not available, or
if it is lost or fallen, position the product so that at least 5 cm clearance
shall be left between the rear surface of the product and the wall of the
room. The clearance at the rear is important for efficient operation of the
product.
4.2 For Products With Water Fountain / Ice Maker
-
The hose sets supplied with the product shall be used. Do not use the old hose sets. Do not extend the hoses!
-
Alwyas connect your product to cold water inlet. Do not perform installation on the hot water inlet. The pressure for the cold water inlet shall be 80 PSi (550 kPa) maximum. If your water pressure exceeds 80Psi or has a water impact effect, use a pressure limiting valve on your mains system. Ask help from professional plumbers if you do not know how to control your water pressure. High pressure may cause damage to the hose connections and pose a risk of flooding.
-
Take required precautions against the risk of freezing of hoses. The operating water temperature interval shall be 0.6°C (33°F) minimum and 38°C (100°F) maximum. There is a risk of flooding if the hose is cracked/perforated.
WARNING: Do not use extension or multisockets in power connection.
WARNING: The manufacturer assumes no responsibility for any damage caused by the work carried out by unauthorized persons.
WARNING: The product’s power cable must be unplugged during installation. Failure to do so may result in death or serious injuries!
WARNING: : If the door span is too narrow for the product to pass, remove the door and turn the product sideways; if this does not work, contact the authorized service. -
Place the product on a flat surface to avoid vibration.
-
Place the product at least 30 cm away from the heater, stove and similar sources of heat and at least 5 cm away from electric ovens.
-
Do not expose the product to direct sunlight or keep in damp environments.
-
The product requires adequate air circulation to function efficiently. If the product will be placed in an alcove, remember to leave at least 5 cm distance between the product and the ceiling and the walls.
4.3 Attaching the plastic wedges
Use the plastic wedges in the provided with the product to provide sufficient
space for air circulation between the product and the wall.
- To attach the wedges, remove the screws on the product and use the screws provided with the wedges.
- Attach 2 plastic wedges on the ventilation cover as shown in the figure.
4.4 Adjustment of the feet
If the product is not in balanced position, adjust the front adjustable stands
by rotating right or left.
4.5 Electrical connection
WARNING: Do not use extension or multi sockets in power connection.
WARNING: Damaged power cable must be replaced by Authorized Service.
- Our firm will not assume responsibility for any damages due to usage without earthing and power connection in compliance with national regulations.
- The power cable plug must be easily accessible after installation.
**** Hot surface warning!
The side walls of your product are equipped with cooler pipes to enhance the
cooling system. High pressure fluid may flow through these surfaces, and cause
hot surfaces on the side walls. This is normal and it does not require
servicing. Be careful when you contact these areas.
Preparation
Read the “Safety Instructions” section first!
5.1 What to do for energy saving.
Connecting the product to electronic energy-saving systems is harmful, as
it may damage the product.
- For a freestanding appliance; ‘this refrigerating appliance is not intended to be used as a builtin appliance.
- Do not keep the refrigerator doors open for long periods.
- Do not place hot food or beverages into the refrigerator.
- Do not overfill the refrigerator; blocking the internal air flow will reduce cooling capacity.
- Depending on the product’s features; defrosting frozen foods in the cooler compartment will ensure energy saving and preserve food quality.
- Food shall be stored using the drawers in the cooler compartment in order to ensure energy saving and protect food in better conditions.
- Make sure the foods are not in contact with the cooler compartment temperature sensor described below.
- Since hot and humid air will not directly penetrate into your product when the doors are not opened, your product will optimize itself in conditions sufficient to protect your food. In this energy saving function, functions and components such as compressor, fan, heater, defrost, lighting, display and so on will operate according to the needs to consume minimum energy while maintaining the freshness of your foodstuff.
5.2 First operation
Before using your refrigerator, make sure the necessary preparations are made
in line with the instructions in “Safety and environment instructions” and
“Installation” sections.
- Keep the product running without placing any food inside for 12 hours and do not open the door, unless absolutely necessary.
A sound will be heard when the compressor is engaged. It is normal to
hear sound even when the compressor is inactive, due to the compressed liquids
and gasses in the cooling system.
It is normal for the front edges of the refrigerator to be warm. These
areas are designed to warm up in order to prevent condensation.
**** For some models, indicator panel turns off automatically 1 minutes after
the door closes. It will be reactivated when the door is open or any button is
pressed.
Operating the Product
- Do not use any mechanical tools or any other tools than the recommendations of the manufacturer to speed up the thawing operation.
- Do not use parts of your refrigerator such as the door or drawers as a support or a step. This may cause the product to trip over or its components to be damaged.
- The product shall be used for storing food only.
- Turn off the water valve if you will be away from home (e.g. at vacation) and you will not be using the Ice Maker or the water dispenser for a long period of time. Otherwise, water leaks may occur.
6.1 Turning off the product
- If you shall not be using the product for a long period;
– unplug it,
– remove the food to prevent odours,
– wait until the ice is thawed,
– clean the inside and wait until it is dried.
– leave the doors open to prevent damage to internal body plastics
6.2 Indicator panel
Indicator panels may vary depending on the model of your product.
Audial and visual functions of the indicator panel will assist in using the
refrigerator.
1. Fault Condition Indicator
2. Energy Saving (Display Off) Indicator
3. Wireless Key
4. Freezing Compartment Temperature Setting Key
5. Cooling Compartment Temperature Setting Key| 6. Support Service Key
7. Quick Freezing Key/ Handle Light Function Setting Key Function
8. Cooling Compartment OFF (Vacation) Function Key
9. Compartment Conversion Key
10. Key for Resetting Wireless Connection Settings
---|---
* Optional: Figures in this user guide are schematic and may not be
exactly match your product. If your product does not comprise the relevant
parts, the information pertains to other models.
Using the product**
-
Fault Condition Indicator
This indicator ( ****) shall be active when your refrigerator cannot perform adequate cooling or in case of any sensor error. “E” shall be displayed on the Freezing Compartment temperature indicator and figures such as 1,2,3… shall be displayed on the cooling compartment temperature indicator. These figures provide information to the authorized service on the error that has occurred. Exclamation mark may be displayed when you load warm food to the freezing compartment or keep the door open for a long period of time. This is not a fault, this warning shall be removed when the food is cooled down or when any key is pressed. -
Energy Saving (Display Off) Indicator
Energy saving function is enabled automatically and the energy saving symbol (|) is displayed when the door of the product is not opened or closed for some period of time. When the energy saving function is active, all symbols on the screen other than the energy saving symbol shall be turned off. When the energy-saving function is active, pressing any key or opening the door will deactivate the energy-saving function and the display signals will return to normal. The energy- saving function is an active function at the factory defaults and cannot be cancelled. -
Wireless Key
When the key is pressed for a long period (3 seconds), the wireless connection symbol on the display/screen flashes slowly (with intervals of 0.5 seconds). The home network is initialized on the product this way. After achieving wireless connection with the product, wireless connection symbol ( **) illuminates continuously. When the initial connection is established, you may activate/deactivate the connection with a short press on this key. The wireless connection symbol shall flash quickly (at 0.2 second intervals) until the connection is established. When the connection is active, the wireless network symbol shall light up continuously.
If the connection cannot be established for a long period, check your connection settings and refer to the “Troubleshooting” section provided in the user manual.
HomeWhiz application shall be used for wireless connection. Installation steps are described on the application during installation. You may access the application by reading the QR code available on the HomeWhiz label on the product. Application is offered through App Store for IOS devices, and through Play Store for Android devices. Visit https://www.homewhiz.com/** for detailed information.’ -
Freezing Compartment Temperature Setting Key
Temperature setting is made for cooler compartment. Pressing this key will enable the freezer compartment temperature to be set at -15,-16,-18,-19,-20,-22,- 24 Celcius. -
Cooling Compartment Temperature Setting Key
Allows setting of temperature for cooler compartment. Pressing this key will enable the cooling compartment temperature to be set at 8,7,6,5,4,3,2 and 1 Celcius. -
Support Service Key
Press this key for 3 seconds to activate/deactivate the support service. Detailed information on the support service is provided in the “Support Service Feature” section. -
Quick Freezing Key
When the quick freeze key is pressed, the quick freeze symbol ( *) shall be illuminated and the quick freeze function shall be activated. Freezing compartment temperature is set to -27 Celcius. Press the key again to cancel function. The quick freezing function shall be automatically cancelled after 52 hours. To freeze a large amount of fresh food, press the quick freeze key before placing the food in the freezer compartment.
Handle Light Function Setting Key
Handle light function might be switched between open and closed modes by pressing quick freezing button ( **) for 3 seconds. In the closed mode, the handle light is only activated when the appliance door is opened and it goes out after a while after the door is closed. In the open mode, the handle light is activated when the appliance door is opened, the handle light stays on dimly after a while after the door is closed. The handle light function is set to the ex-factory closed mode. -
Cooling Compartment OFF (Vacation) Function Key
Press the key for 3 seconds to activate the vacation function. Vacation mode is activated and the vacation symbol ( ****) is illuminated. “- -” shall be displayed on the Cooling Compartment temperature indicator and the cooling compartment does not actively perform cooling. You shall not keep your food in the cooling compartment when this function is activated. The other compartments continue to cool according to the set temperatures. Press the key for 3 seconds again to cancel this function. -
Compartment Conversion Key
When the compartment conversion key is pressed for 3 seconds, freezer compartment switches between cooler, off, and freezer modes respectively. When it is operated as cooling compartment, the temperature of the compartment may be set at 8,7,6,5,4,3,2 and 1 Celcius. In case of OFF mode, compartment temperature indicator shall display “- -”. -
Key for Resetting Wireless Connection Settings
To reset the wireless connection settings, press Quick freezing ( ) and wireless connection ( ) keys simultaneously for 3 seconds. All user information recorded previously are removed on a product where wireless connection settings are reset/restored to factory defaults.
6.3 Support Service Feature
*May not be available in all models
Support Service is a feature that allows you to create a request for our
expert representatives through a special offer on your white goods products.
After the request to be created with the Support Service button, our expert
customer representatives will be able to call you from your mobile phone
number that you have registered in the HomeWhiz application and help you about
all your questions.
6.4 Entering Phone Number for Support Service
To ensure that your customer representative may call you after creating a
request by pressing Support Service button, you shall share your mobile phone
number with the application. You may add or change your mobile phone number
through the communication menu on the HomeWhiz application.
6.5 Creating a Request Via Support Service
To create a Support Service request, your product must be connected to the
internet.
- Ensure that you have an internet connection on the product and you have entered your mobile phone number via HomeWhiz application.
- Press the support service key for 3 seconds.
- Support Service symbol shall start to blink.
- When your request is delivered to the customer representative successfully, Support Service symbol shall constantly illuminate.
- Your customer representative shall call you via the telephone number that you have specified on the HomeWhiz application.
- The symbol shall turn off when the call is completed.
- If your request does not reach the customer representative successfully, the light of the symbol will turn off after a while. In this case, follow the guides in the troubleshooting step.
6.6 Cancelling a Support Service Request
If you want to cancel your support service request, your request shall be
delivered to the customer representative successfully and the symbol shall be
illuminated constantly. To cancel;
- Press the support service button for 3 seconds.
- Support Service symbol shall start to blink.
- Symbol shall turn off when your request is cancelled successfully.
- If your request does not cancel, Support Service symbol shall constantly illuminate again.
6.7 Troubleshooting
When you press the support service button, the light of the symbol does not
illuminate constantly, turned off immediately or if it is constantly blink:
- Ensure that your product is connected to the internet.
- Ensure that you have a HomeWhiz account and that you have entered your mobile phone number via HomeWhiz application.
- Ensure the accuracy of the phone number that you registered to the HomeWhiz application.
- If the internet connection is not available, this feature does not work. Check your home internet connection.
Info:
- When you press the support service key; If the wireless connection is off, it shall be turned on automatically.
- You will not be allowed to turn off your product’s wireless connection, while the Support Service process is in progress.
- When the Support Service operation is complete; Wireless connection shall continue unless you turn it off.
6.8 Humidity controlled crisper (FullFresh+)
(Optional)
Thanks to the humidity controlled crisper, vegetables and fruits may be
stored for a longer period at an environment with ideal humidity conditions.
With the humidity setting system with 3 options in front of your crisper, you
may control the humidity inside the compartment as per the food you store. We
recommend you to store your food by selecting vegetable option when you store
vegetables only, fruit option when you store fruit only and mixed option when
you store mixed food. We recommend that the vegetables and fruits shall not be
stored in bags to improve the storage period of the food and to better benefit
from the humidity control system. Leaving them in plastic bags causes
vegetables to rot in a short time.
We recommend that cucumbers and broccolis, in particular, are not stored in
closed bags. In situations where contact with other vegetables is not
preferred, use packaging materials such as paper that has a certain level of
porosity in terms of hygiene.
When placing the vegetables, place heavy and hard vegetables at the bottom and
light and soft ones on the top, taking into account the specific weights of
vegetables.
Do not put fruits that have a high ethylene gas production such as pear,
apricot, peach and particularly apple in the same crisper with other
vegetables and fruits. The ethylene gas coming out of these fruits might cause
other vegetables and fruits to mature faster and rot in a shorter period of
time.
6.9 Blue light/VitaminZone
*May not be available in all models
For the blue light,
Fruits and vegetables stored in the crispers that are illuminated with a blue
light continue their photosynthesis by means of the wavelength effect of blue
light and thus preserve their vitamin content.
For VitaminZone,
Fruits and vegetables stored in crispers illuminated with the VitaminZone
technology preserve their vitamins for a longer time thanks to the blue,
green, red lights and dark cycles, which simulate a day cycle.
If you open the door of the refrigerator during the dark period of the
VitaminZone technology, the refrigerator will automatically detect this and
enable the blue-green or red light to illuminate the crisper for your
convenience. After you have closed the door of the refrigerator, the dark
period will continue, representing the night time in a day cycle.
6.10 Anti-Odour Module (OdourFresh +)
(This feature is optional)
Thanks to this module, which is positioned behind the evaporator cover in the
fresh food compartment, the air is actively passed over the titanium dioxide-
coated photocatalytic filter and the cleaned air is circulated inside. In this
way, bad odours are removed from the interior of the refrigerator before
becoming permeated with the food surfaces, and at the same time, a hygienic
air circulation is achieved via disinfected air. This feature is driven by the
fresh food compartment fan located behind the evaporator cover, the UV-A LED
and the titanium dioxide-coated odour filter. Providing a hygienic and odour-
free air circulation, this module will be activated automatically
periodically. If the door of the fresh food compartment is opened while the
module is active, the fan and UV-A LED will not operate temporarily, but will
resume operation once the door is closed. In case of a power outage, the
module will resume operation from the point it stopped once the power is
restored.
Note: To prevent bad odours that may occur with the mixture of odours
from different types of food, we recommend you to store aromatic food such as
cheese, olives and delicatessen in their packaging and with their lids closed.
For the safety of other food stored, hygienic storage conditions and to
prevent bad odours, we recommend you to remove the food that you have observed
to be spoilt from the refrigerator as soon as possible.
6.11 Ice bucket
(This feature is optional)
Ice bucket allows you take ice easily from the refrigerator.
Using the ice bucket
- Take the ice bucket from the freezer compartment.
- Fill the ice bucket with water.
- Place the ice bucket into the freezer compartment. The ice will be ready after approximately two hours.
- Take the ice bucket from the freezer compartment and bend in slightly over the holder that you are going to serve. Ice will easily pour into the serving holder.
6.12 Ice maker
(This feature is optional)
Ice maker allows you take ice easily from the refrigerator.
Using the ice bucket
- Remove the water tank in the cooler compartment.
- Fill the water tank with water.
- Place the water tank back. First ice will be ready in about 4 hours in the ice maker drawer in the freezer compartment.
You may obtain about 60-70 cubes of ice when the water tank is full.
Water inside the water tank shall be replaced within 2-3 weeks at most.
6.13 The dairy (cold storage) compartment
(This feature is optional)
“The dairy (cold storage) compartment” provides lower temperature than the
refrigerator compartment. Use this compartment to store delicatessen (salami,
sausages, dairy products and etc. ) that requires lower storage temperature or
meat, chicken or fish products for immediate consumption. Do not store fruits
and vegetables in this compartment.
6.14 Crisper
The refrigerator’s crisper is designed to keep vegetables fresh by preserving
humidity. For this purpose, the overall cold air circulation is intensified in
the crisper. Keep fruits and vegetables in this compartment. Keep the green-
leaved vegetables and fruits separately to prolong their life.
6.15 Crisper Separator Ethylene Filter
The ethylene retaining filter helps to remove the ethylene gas and bad odours
released from the vegetables and fruits in the crisper.
You may store the fruits such as pear, apricot, peach and particularly apples,
which generate high amount of ethylene gas, separately with other vegetables
and fruits in the same crisper thanks to the vegetable separator.
The ethylene gas released from these fruits may cause your other vegetables
and fruits to ripen faster and rot in a shorter time.
Thanks to this feature, you may keep your fresh food and particularly your
green vegetables that are sensitive to ethylene gas fresh for a longer period
of time.
You may store your food for a longer period of time by placing the foods
sensitive to ethylene gas in one of the compartments separated by the crisper
separator, and the foods that generate ethylene gas in the other compartment.
Foods that generate ethylene gas and that are
Food that generate ethylene gas | Food that are sensitive to ethylene gas |
---|
Apple, pear, apricot, peach, nectarine, avocado, kiwi, plum, fig, quince,
tomato| Fresh green vegetables (such as lettuce, parsley), strawberry, cherry,
grapes,
orange, tangerine, pineapple, cherry, lemon, cucumber, broccoli, pepper,
eggplant, okra, zucchini
6.16 Cleaning of the Ethylene Filter
Ethylene filter shall be cleaned once a year.
Remove the ethylene filter by pulling the filter cover upwards as shown in the
figure.
Leave the ethylene filter under sunlight for a day. Thus, your filter shall be
cleaned.
Put the filter back, and close the upper cover.
To provide maximum effectiveness of your filter and to preserve its
performance, avoid contact with oil and similar fluids, and materials such as
water and detergents. Communicate with the service to replace your filter with
a new one after such contact.
6.17 Cleaning of the Crisper Separator
To prevent blockage of the clean air holes of the crisper separator, wipe it
with a clean, dry cloth in specified intervals. If the separator shall be
washed, always remove the filter from the separator.
WARNING: Ensure that the holes around the filter are not blocked to
ensure air circulation.
6.18 Operation of the Legumes Dispenser
Legumes dispenser (DryZone) helps your legumes to be stored for a longer
period of time in a compartment with low air permeability.
The sheet suspender piece on which the dispensers for legumes are hung should
be placed on the pins (indicated by the dashed line) on the door plastic.
- Fill your unpacked legumes into the reservoir.
- Make sure your legumes poured from the packaging into the reservoir are dry to prevent spoiling of food and foul odours.
- To preserve the quality and shelf life of the food, it is recommended that only the following foods are put in the dispenser compartment.
Foods recommended to be stored in the dispenser
Legumes
– Lentils (green, red, yellow)
– Chickpea
– Beans
– Mung beans
– Kidney bean
– Red bean
– Broad bean
Cereals
– Rice
– Bulghur
– Sweet corn
It is strictly not recommended to store the following foods in the legumes
dispenser because of the risk of damaging the dispenser mechanism or of the
fact that they are not suitable for storage in the refrigerator.
– Foods not recommended to be stored in the dispenser
– Liquid foods (water, fruit juice, carbonated drinks, alcoholic and non-
alcoholic drinks)
– Sauces (ketchup, mayonnaise, salad dressings)
– Fruits and vegetables
– Powdered foods (such as flour, salt, sugar)
– Baby formulas
– Spices (chili peppers, thyme, black pepper)
– Cake
Always follow the values provided in the table for storage times.
Food | Storage period (months) |
---|
Legumes (Lentils, Chickpeas, Beans, Mung Beans, Kidney beans, Red Beans, Broad
Beans)| 6-10
Cereals (Rice, Wheat, Bulghur, Sweet corn)| 12
Using the Legumes Dispenser
Legumes dispenser is designed to store a maximum of 1 kg of the food specified
above. Do not load more legumes over the ‘MAX’ mark shown on the reservoir.
It shall be used as follows;
- Fill the legumes into the reservoir and close the lid.
- Position the filled reservoir in the metal hanger on the refrigerator door so that it shall hang from the protrusions on the back of the reservoir. Make sure that the protrusions fit into the opening on the metal attachment.
- By pushing the trigger with a container that you may discharge the food such as a glass etc., you may get your legumes from the legumes dispenser. When you push the trigger, the latch at the bottom of the trigger shall open and the legumes shall be poured into the container.
- There is a child lock on the legumes dispenser. To activate the child lock, rotate the plastic part at the bottom of the reservoir towards you and ensure that the tabs are secured in their seat. The trigger shall still be operating when the child lock is active, but the inner latch shall not open.
- The legumes dispenser may stand on a flat surface. You may also use the reservoirs on a flat surface, such as a table or worktop, if necessary.
- Install the child lock to prevent spilling of the legumes while installing and removing the legumes dispenser.
- After ensuring that it is dried, the dispenser unit shall be placed back in the shelf compartment.
Cleaning the Legumes Dispenser
- The legumes dispenser shall be removed from the shelf and washed at regular intervals.
- The silicone part in the reservoir compartment shall be removed and washed together with the dispenser unit and the it shall be dried thoroughly.
- The dried silicone part shall be put back into the reservoir compartment of the dispenser.
6.19 Using the water fountain (This feature is optional)
The first few glasses of water taken from the fountain will normally
be warm.
If the water fountain is not used for a long time, dispose of the first
few glasses of water to get clean water.
- Push the arm of the water fountain with your glass. It would be easier to push the arm with your hand if you are using a soft plastic glass.
- Release the arm after filling your glass with water as you desire.
**** The amount of water flow from the fountain depends on the pressure you apply on the arm. Release the pressure on the arm slightly as the water level in your glass/container is increased to prevent overflow. Water shall drip if you press the arm slightly; this is normal and it is not a malfunction.
6.20 Filling the water tank of the water fountain
Open the lid of the water tank as shown in the figure. Fill in pure and clean
drinking water.
Close the lid.
6.21 Cleaning the water tank
Remove the water filling reservoir inside the door shelf.
Detach by holding both sides of the door shelf.
Hold both sides of the water tank and remove at 45° angle.
Remove and clean the water tank lid.
Do not fill the water tank with fruit juice, fizzy beverages, alcoholic
beverages or any other liquids incompatible for use in the water fountain.
Using such liquids will cause malfunction and irreparable damage in the water
fountain. Using the fountain in this way is not within the scope of warranty.
Certain chemicals and additives in such beverages / liquids may cause material
damage to the water tank.
The water tank and water fountain components cannot be washed with
dishwashers.
6.22 Filling the water tank of he water fountain
Water tank filling reservoir is inside the door shelf.
-
Open the lid of the reservoir.
-
Fill the reservoir with clean drinking water.
|
---|--- -
Close the lid of the reservoir.
Do not fill the water tank with fruit juice, fizzy beverages, alcoholic
beverages or any other liquids incompatible for use in the water fountain.
Using such liquids will cause malfunction and irreparable damage in the water
fountain. Using the fountain in this way is not within the scope of warranty.
Certain chemicals and additives in such beverages / liquids may cause material
damage to the water tank.
Use clean drinking water only.
** Water reservoir capacity is 3 litres, do not overfill.
6.23 Cleaning the water tank**
- Remove the water filling reservoir inside the door shelf.
- Detach by holding both sides of the door shelf.
- Hold both sides of the water tank and remove at 45° angle.
- Remove the lid and clean the water tank.
** The water tank and water fountain components cannot be washed with
dishwashers.
6.24 Drip tray**
The water dripping from the water fountain accumulates on the drip tray.
Remove the plastic strainer as shown in the figure.
Wipe the collected water with a dry and clean cloth.
6.25 Freezing fresh food
- Activate the fast freezing function by pressing the «Fast Freeze» button 24 hours before load- ing the food to be frozen.
- 24 hours after pressing the button, place your hot food on glass shelf of the product.
- The fast freezing function will be automatically inactivated after 52 hours.
- Do not try to freeze a large quantity of food at a time. Within 24 hours, this product can freeze the maximum food quantity specified as «Freezing Capacity … kg/24 hours» on its type label. It is not convenient to put more unfrozen/ fresh foods than the quantity specified on the label.
- When you put unfrozen food into the product, avoid placing them contacting frozen food.
- Freezing the food items when fresh will extend the storage time in the freezer compartment.
- Pack the food items in air-tight packs and seal tightly.
- Make sure the food items are packed before putting in the freezer. Use freezer holders, tinfoil and damp-proof paper, plastic bag or similar packaging materials instead of traditional packaging paper.
- Mark each food pack by writing the date on the package before freezing. This will allow you to determine the freshness of each pack every time the freezer is opened. Keep the earlier food items in the front to ensure they are used first.
- Frozen food items must be used immediately after defrosting and should not be frozen again.
- Do not free large quantities of food at once.
Freezer Compartment
Temperature Setting| Cooler Compartment
Temperature Setting| Details:
---|---|---
-18°C| 4°C| This is the default, recommended setting.
-201-22 or -24°C| 4°C| These settings are recommended for ambient temperatures exceeding 30°C.
Quick Freeze| 4°C| Use when you want to freeze your food in a short time. When
the process ends, the product will regain its position.
– 18°C or colder| 2°C| Use these settings if you believe the cooler
compartment is not cold enough due to ambient temperature or frequently
opening the door.
6.26 Recommendations for storing frozen foods in the freezer compartment
The compartment must be set to at least -18°C.
- Place the food items in the freezer as quickly as possible to avoid defrosting.
- Before freezing, check the “Expiry Date” onthe package to make sure it is not expired.
- Make sure the food’s packaging is not damaged.
6.27 Deep freezer details
As per the IEC 62552 standards, at 25°C room temperature, the freezer must
have the capacity to freeze 4,5 kg of food items at -18°C or lower
temperatures in 24 hours for each 100 litres of freezer compartment volume.
Food items can only be preserved for extended periods at or below temperature
of -18°C . You can keep the foods fresh for months (in deep freezer at or
below temperatures of 18°C ). The food items to be frozen must not contact the
already-frozen food inside to avoid partial defrosting.
Boil the vegetables and filter the water to extend the frozen storage time.
Place the food in air-tight packages after filtering and place in the freezer.
Bananas, tomatoes, lettuce, celery, boiled eggs, potatoes and similar food
items should not be frozen. In case this food rots, only nutritional values
and eating qualities will be negatively affected. A rotting threatening human
health is not in question.
6.28 Placing food
Freezer compartment shelves| Various frozen goods including meat, fish, ice
cream, vegetables etc.
---|---
Cooler compartment shelves| Food items inside pots, capped plate and capped
cases, eggs (in capped case)
Cooler compartment door shelves| Small and packed food or beverages
Crisper| Fruits and vegetables
Fresh food compartment| Delicatessen (breakfast food, meat products to be
consumed in short notice)
6.29 Door open alert
(This feature is optional)
An audible alert will be heard if the product’s door remains open for 1,5
minute. The audible alert will stop when the door is closed or any button on
the display (if available) is pressed.
6.30 Illumination lamp
Interior light uses a LED type lamp. Contact the authorized service for any
problems with this lamp. Lamp(s) used in this appliance cannot be used for
house lighting. Intended use of this lamp is to help the user place food into
the refrigerator / freezer safely and comfortably.
6.31 Convertible Feature of the Product
The freezer of your refrigerator is designed for three types of modes: chiller
(fresh food storage), deep-freezer (frozen food storage) and when desired in
closed mode. The switches between these operating modes are implemented as
specified in 10th feature of Instrument panel clause 6.2. Thanks to the no-
frost cooling system, the cooling speed is much faster than other
refrigerators and automatic defrost is performed as well. When switched to the
freezer mode, the materials with the risk of breaking at subzero temperatures
such as bottles should be taken out of the product. Keep in mind that frozen
food remaining in the product may thaw and spoil when switched to fresh food
storage mode.
Maintenance and cleaning
WARNING: Read the “Safety Instructions” section first!.
WARNING: Unplug the refrigerator before cleaning it.
- Do not use sharp or abrasive tools to clean the product. Do not use materials such as household cleaning agents, soap, detergents, gas, gasoline, alcohol, wax, etc.
- The dust shall be removed from the ventilation grill on the rear of the product at least once a year (without opening the cover). Cleaning shall be performed with a dry cloth.
For Products With Water Fountain / Ice Maker
-
If the water in the water tank has waited for 2-3 weeks, it shall be replaced.
-
The water tank and the components of the water fountain shall not be washed in dishwashers.
-
Melt a teaspoonful of carbonate in the water.
Moisten a piece of cloth in the water and wring out. Wipe the device with this cloth and dry off thoroughly. -
Take care to keep water away from the lamp’s cover and other electrical parts.
-
Clean the door with a damp cloth. Remove all contents to remove the door and body racks. Remove the door racks by lifting them upwards. Clean and dry the shelves, then attach back in place by sliding from above.
-
Do not use chlorinated water or cleaning products on the exterior surface and chromecoated parts of the product. Chlorine will cause rust on such metallic surfaces.
-
Do not use sharp and abrasive tools, soap, house cleaning materials, detergents, gas, gasoline, varnish and similar substances to prevent deformation of the plastic part and removal of prints on the part. Use warm water and a soft cloth for cleaning, and then dry it.
-
On the products without a No-Frost feature, water droplets and icing up to a thickness of a finger may occur on the rear wall of the freezer compartment. Do not clean, and never apply oils or similar materials.
-
Use a mildly dampened micro-fiber cloth to clean the external surface of the product. Sponges and other types of cleaning clothes may cause scratches.
-
To clean all removable components during the cleaning of the interior surface of the product, wash these components with a mild solution consisting of soap, water and carbonate. Wash and dry thoroughly. Prevent contact of water with illumination components and the control panel.
CAUTION:
Do not use vinegar, rubbing alcohol or other alcohol based cleaning agents on
any interior surface.
7.1 Stainless Steel External Surfaces
Use a non-abrasive stainless steel cleaning agent and apply it with a soft
lint-free cloth. To polish, gently wipe the surface with a micro-fiber cloth
dampened with water and use dry polishing chamois. Always follow the veins of
the stainless steel.
7.2 Cleaning of the Products with Glass Doors
Remove the protective foil on the glasses. There is a coating on the surface
of the glasses. This coating minimizes formation of stains and provides easy
cleaning of the stains and dirts that have been formed. Glass that is not
protected by coating may be exposed to permanent bonding of organic or
inorganic, air and water-based contaminants such as limestone, mineral salts,
unburned hydrocarbons, metal oxides and silicones, which cause staining and
physical damage easily in a short period of time. Keeping the glasses clean
becomes very difficult, if not impossible, despite the fact they are cleaned
regularly. As a result, the transparency and appearance of the glass
deteriorates. Hard and abrasive cleaning methods and agents further increase
these defects and accelerate the process of deterioration.
For routine cleaning processes, *non-alkaline and non-corrosive water based
cleaning products shall be used.
In order to have a longer service life of this coating, alkaline and corrosive
substances shall not be used during cleaning.
A tempering process is applied to increase the resistance of these glasses
against impacts and breakage.
As an additional safety precaution, a safety film has been applied to the rear
surface of these glasses to prevent harm to the environment in case it breaks.
7.3 Preventing Odours
The product is manufactured free of any odorous materials. However, keeping
the food in inappropriate sections and improper cleaning of internal surfaces
may lead to odours.
To avoid this, clean the inside with carbonated water every 15 days.
-
Keep the foods in sealed holders.
Microorganisms may spread out of unsealed food items and cause malodour. -
Do not keep expired and spoilt foods in the refrigerator.
Tea is one of the most effective odour removers. Place the pulp of the brewed
tea in the product inside an open container and remove it after 12 hours at
the latest. If you keep the tea pulp inside the product for longer than 12
hours, it will collect the organisms that cause the odour so it can be the
source of odour itself.
7.4 Protecting Plastic Surfaces
Oil spilled on plastic surfaces may damage the surface and must be cleaned
immediately with warm water.
Troubleshooting
Check this list before contacting the service. Doing so will save you time and
money. This list includes frequent complaints that are not related to faulty
workmanship or materials. Certain features mentioned herein may not apply to
your product.
The refrigerator is not working.
- The power plug is not fully settled. >>> Plug it in to settle completely into the socket.
- The fuse connected to the socket powering the product or the main fuse is blown. >>> Check the fuse.
Condensation on the side wall of the cooler compartment (MULTI ZONE, COOL, CONTROL and FLEXI ZONE).
- The door is opened too frequently >>> Take care not to open the product’s door too frequently.
- The environment is too humid. >>> Do not install the product in humid environments.
- Foods containing liquids are kept in unsealed holders. >>> Keep the foods containing liquids in sealed holders.
- The product’s door is left open. >>> Do not keep the product’s door open for long periods.
- The thermostat is set to a very cool
- temperature. >>> Set the thermostat to an appropriate temperature.
Compressor is not working.
- In case of sudden power failure or pulling the power plug off and putting back on, the gas pressure in the product’s cooling system is not balanced, which triggers the compressor thermic safeguard. The product will restart after approximately 6 minutes. If the product does not restart after this period, contact the service.
- Defrosting is active. >>> This is normal for a fully-automatic defrosting product. The defrosting is carried out periodically.
- The product is not plugged in. >>> Make sure the power cord is plugged in.
- The temperature setting is incorrect. >>> Select the appropriate temperature setting.
- The power is out. >>> The product will continue to operate normally once the power is restored.
The refrigerator’s operating noise is increasing while in use.
- The product’s operating performance may vary depending on the ambient temperature variations. This is normal and not a malfunction.
The refrigerator runs too often or for too long.
- The new product may be larger than the previous one. Larger products will run for longer periods.
- The room temperature may be high. >>> The product will normally run for long periods in higher room temperature.
- The product may have been recently plugged in or a new food item is placed inside. >>> The product will take longer to reach the set temperature when recently plugged in or a new food item is placed inside. This is normal.
- Large quantities of hot food may have been recently placed into the product. >>> Do not place hot food into the product.
- The doors were opened frequently or kept open for long periods. >>> The warm air moving inside will cause the product to run longer. Do not open the doors too frequently.
- The freezer or cooler door may be ajar. >>> Check that the doors are fully closed.
- The product may be set to temperature too low. >>> Set the temperature to a higher degree and wait for the product to reach the adjusted temperature.
- The cooler or freezer door washer may be dirty, worn out, broken or not properly settled. >>> Clean or replace the gasket. Damaged / torn door washer will cause the product to run for longer periods to preserve the current temperature.
The freezer temperature is very low, but the cooler temperature is adequate.
- The freezer compartment temperature is set to a very low degree. >>> Set the freezer compartment temperature to a higher degree and check again.
The cooler temperature is very low, but the freezer temperature is adequate.
- The cooler compartment temperature is set to a very low degree. >>> Set the freezer compartment temperature to a higher degree and check again.
The food items kept in cooler compartment drawers are frozen.
- The cooler compartment temperature is set to a very low degree. >>> Set the freezer compartment temperature to a higher degree and check again.
The temperature in the cooler or the freezer is too high.
- The cooler compartment temperature is set to a very high degree. >>> Temperature setting of the cooler compartment has an effect on the temperature in the freezer compartment. Wait until the temperature of relevant parts reach the sufficient level by changing the temperature of cooler or freezer compartments.
- The doors were opened frequently or kept open for long periods. >>> Do not open the doors too frequently.
- The door may be ajar. >>> Fully close the door.
- The product may have been recently plugged in or a new food item is placed inside. >>> This is normal. The product will take longer to reach the set temperature when recently plugged in or a new food item is placed inside.
- Large quantities of hot food may have been recently placed into the product. >>> Do not place hot food into the product.
Shaking or noise.
- The ground is not level or durable. >>> If the product is shaking when moved slowly, adjust the stands to balance the product. Also make sure the ground is sufficiently durable to bear the product.
- Any items placed on the product may cause noise. >>> Remove any items placed on the product.
The product is making noise of liquid flowing, spraying etc.
- The product’s operating principles involve liquid and gas flows. >>> This is normal and not a malfunction.
There is sound of wind blowing coming from the product.
- The product uses a fan for the cooling process. This is normal and not a malfunction.
There is condensation on the product’s internal walls.
- Hot or humid weather will increase icing and condensation. This is normal and not a malfunction.
- The doors were opened frequently or kept open for long periods. >>> Do not open the doors too frequently; if open, close the door.
- The door may be ajar. >>> Fully close the door.
There is condensation on the product’s exterior or between the doors.
- The ambient weather may be humid, this is quite normal in humid weather. >>> The condensation will dissipate when the humidity is reduced.
The interior smells bad.
- The product is not cleaned regularly. >>> Clean the interior regularly using sponge, warm water and carbonated water.
- Certain holders and packaging materials may cause odour. >>> Use holders and packaging materials without free of odour.
- The foods were placed in unsealed holders. >>> Keep the foods in sealed holders. Micro- organisms may spread out of unsealed food items and cause malodour.
- Remove any expired or spoilt foods from the product..
The door is not closing.
- Food packages may be blocking the door. >>> Relocate any items blocking the doors.
- The product is not standing in full upright position on the ground. >>> Adjust the stands to balance the product.
- The ground is not level or durable. >>> Make sure the ground is level and sufficiently durable to bear the product.
The crisper is jammed.
- The food items may be in contact with the upper section of the drawer. >>> Reorganize the food items in the drawer.
In case of a Hot Surface on the Product,
- High temperature may be observed between two doors, on the side panels and on the rear grill area while your product is operated. This is normal and it does not require servicing!
Fan continues to operate when the door is opened.
- Fan may continue to operate when the the freezer door is open.
WARNING: If the problem persists after following the instructions in this section, contact your vendor or an Authorized Service. Do not try to repair the product.
DISCLAIMER/WARNING
Some (simple) malfunctions may be repaired by end users without creating any
safety issue or causing unsafe usage provided that they are carried out under
the following instructions.
(Please see the section “I Want to Repair Myself”.)
For this reason, except for parts specified at the section “I Want to Repair
Myself” as could be repaired by end users, repair by an authorized service
station is definitely suggested for the purpose of preventing any safety
issues and this is required so that Arçelik product warranty may continue.
I WANT TO REPAIR MYSELF
Repair that will be carried out by end users can be performed within the
following spare parts: Door Handles and Door Hinges, Door Joints and
peripheral Trays, Baskets, Racks. (You may have access to current list of
spare parts from https://www.arcelik.com.tr/destek as of 1 March 2021)
Further, in order to ensure product safety and to prevent risk of severe
injuries, repair has to be carried out according to instructions from user
manual or https://www.arcelik.com.tr/destek. For your own safety, please
unplug product prior to carrying out any repair.
Arçelik may not be held responsible for safety issues that may arise because
of repairs or attempts not carried out in accordance with instructions
specified at user manuals or located at
https://www.arcelik.com.tr/destek and performed on parts other than
parts contained at current list of parts accessed from
https://www.arcelik.com.tr/destek. In such a case, Arçelik product
warranty will be invalid.
For this reason, we strongly recommend end users to avoid carrying out repairs
for parts other than above-mentioned spare parts themselves and apply to an
authorized service station in case of requirement. Such repair attempts by end
users may cause safety issues, may damage product and may cause fire, flood,
electrocution and severe personal injuries afterwards.
Including but not limited to the listed items, repairs of the following parts
have to be performed by authorized service stations: Compressor, Cooling
system elements, Motherboard, Inverter card, Display card, etc.
Manufacturer/dealer may not be held responsible for any circumstances where
end users fail to act in accordance with the foregoing.
This product is equipped with a lighting source of the “G” energy class.
The lighting source in this product shall only be replaced by professional
repairers.
**58 6849 0000**
Documents / Resources
|
arcelik 583630EI No Frost
Refrigerator
[pdf] User Manual
583650EI, 583630EI, 583630EI No Frost Refrigerator, No Frost Refrigerator,
Refrigerator
---|---
References
- Arçelik İyiliği Aşkla Tasarlar
- Destek ve Bilgi Merkezi | Arçelik
- SERBÄ°S
- Arçelik
- Arçelik
- Arçelik (@arcelik) • Instagram photos and videos