LEDS C4 LX900-30-8644-81-92 Stem Ceiling Fan with Light Instruction Manual

October 30, 2023
LEDS C4

LEDS C4 LX900-30-8644-81-92 Stem Ceiling Fan with Light

LEDS-C4 LX900-30-8644-81-92-Stem-Ceiling-Fan-with-
Light

Product Information

  • Product Name: STEM
  • Dimensions: 299 mm x 80 mm x 80 mm
  • Operational Frequency Band: 433.92 MHz
  • Maximum Radio-frequency Power: -10dBm ERP
  • Manufacturer: LEDS C4, S.A.

Product Usage Instructions

LEDS-C4 LX900-30-8644-81-92-Stem-Ceiling-Fan-with-
Light-1

Fan Control

  • To turn the fan on or off, press the ON/OFF button.
  • To set the fan to turn off automatically after a certain period of time, press the OFF button repeatedly until the desired time appears on the display (1h, 2h, 4h, or 8h).

LEDS-C4 LX900-30-8644-81-92-Stem-Ceiling-Fan-with-
Light-2

LEDS-C4 LX900-30-8644-81-92-Stem-Ceiling-Fan-with-
Light-3

LEDS-C4 LX900-30-8644-81-92-Stem-Ceiling-Fan-with-
Light-4

LEDS-C4 LX900-30-8644-81-92-Stem-Ceiling-Fan-with-
Light-5

LEDS-C4 LX900-30-8644-81-92-Stem-Ceiling-Fan-with-
Light-6

Calibration

To calibrate the fan, follow these steps:

  1. Turn the fan on.
  2. Press and hold the A button until the display shows “CAL”.
  3. Press the B button to select the calibration mode.
  4. Press and hold the C button until the display shows “CAL-1”.
  5. Press and hold the D button until the display shows “CAL-2”.
  6. Press and hold the ON button to exit calibration mode.

LEDS-C4 LX900-30-8644-81-92-Stem-Ceiling-Fan-with-
Light-8

LEDS-C4 LX900-30-8644-81-92-Stem-Ceiling-Fan-with-
Light-9

DC Remote Control Reset and Sync

To synchronize multiple fans with the same remote control, follow these steps:

  1. Cut off the mains of all other fans.
  2. Disconnect the mains of the fan you want to synchronize from the power source.
  3. Reconnect the mains and wait for 30 seconds.
  4. Press and hold the ON/OFF button on the remote control for 5 seconds.

Disconnect the mains and start the synchro process.

In case you want to synchronize more than one fan with the same remote control you have to repeat the synchronization process with all fans, cutting off the mains of the other fans.

LEDS-C4 LX900-30-8644-81-92-Stem-Ceiling-Fan-with-
Light-11

Switch on the mains. Since the power is on, you have 30 seconds to finalize the synchronization process.

Press the remote control button FAN ON/OFF for 5 seconds, then you will heard a “beep” which means the synchronization process has been completed successfully.

Declaration of Conformity

The STEM fan is in conformity with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available on the LEDS C4, S.A. website.

LEDS C4, S.A. hereby declares that its fan(1) is a type of radio equipment in conformity with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available online at: www.leds-c4.com
(1)The product reference can be found on the label.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals