ECOFLOW River600 Portable Power Station Instruction Manual
- June 5, 2024
- ECOFLOW
Table of Contents
Portable Power Station
Instruction Manual
What’s in the Box
Connection method
How to set up your solar panel
-
Open and unfold the EcoFlow Solar Panel.
-
Adjust the solar panel on the Kickstand Case.
-
Attach the solar panel onto the Kickstand Case using the snap hooks.
-
Connect the solar panel MC4 Connector to the MC4 to XT60 Cable (Solar Charging Cable, sold separately) and connect the MC4 to XT60 Cable to the XT60 port on the EcoFlow power station.
-
In order to increase the efficiency of the EcoFlow Solar Panel, use it in direct sunlight, position it perpendicular to the sunlight, and make sure the solar panels are unobstructed.
-
The carrying case also doubles up as a kickstand, which enables you to position the solar power at a 60° to 90° angle.
Connecting the Solar Panels in Parallel or in Series
Wire solar panels in parallel : (refer to the figure below)
- Connect the positive poles of the solar panels with the positive poles of the Solar MC4 Parallel Connection Cable. Connect the negative poles of the solar panels with the negative poles of the Solar MC4 Parallel Connection Cable;
- Connect the parallel cable connectors (output side) with the MC4 connectors on the MC4 to XT60 Cable (sold separately);
- Connect the XT60 connector on the MC4 to XT60 Cable to the XT60 port on the EcoFlow portable power station.
Refer to the user manuals of specific EcoFlow power stations to discover more
information about connecting solar panels.
Wire solar panels in series : (refer to the figure below)
- Connect the male connector of one solar panel to the female connector of the other solar panel;
- Connect the solar panel MC4 Connectors to the MC4 to XT60 Cable (sold separately);
- Connect the XT60 connector on the MC4 to XT60 Cable to the XT60 port on the portable power station. Refer to the user manuals of specific EcoFlow power stations to discover more information about connecting solar panels.
Refer to the user manuals of specific EcoFlow power stations to discover more information about connecting solar panels.
FAQ
Are EcoFlow solar panels waterproof?
EcoFlow Solar Panels are IP67 rated, which means they can be submerged in a
body of water up to a meter deep for 30 mins. They are also dustproof,
durable, and suitable for outdoor usage. If you wish to clean your solar
panel, use a gentle stream of water and do not use high-pressure water sources
such as a jet spray, as high pressure may damage the solar panels.
Does the charging speed of EcoFlow solar panels vary?
Solar panel charging speeds vary with different operating and environmental
conditions:
Weather: Solar panels may have lower outputs in cold, cloudy, and rainy
conditions;
Positioning: Solar panels may have lower outputs when they are not
directly facing the position of the sun;
Obstructions: Solar panels may have lower outputs when placed under
shade, behind other objects, or behind a window.
Warning: Avoid applying external pressure to the solar panels; doing so
can damage the solar panel cells and result in reduced outputs.
Can EcoFlow solar panels be used in extreme weather conditions?
Please use the solar panels in stable weather conditions. The optimal
temperature range for normal use and storage of EcoFlow solar panels is -4°F
to 185°F (-20°C to 85°C). Warning: DO NOT use solar panels during severe
weather conditions, such as thunderstorms, strong winds, and hailstorms.
Can EcoFlow solar panels store power themselves?
Solar panels convert solar energy into electricity and pass it as a DC
current to an EcoFlow power station, as opposed to storing power themselves.
Technical Specifications
160W Solar Panel | 110W Solar Panel |
---|---|
Rated Power: 160W(+/-5W)* | Rated Power: 110W(+/-5W)* |
Open Circuit Voltage: 21.4V (Vmp 18.2V) | Open Circuit Voltage: 21.7V (Vmp |
18.5V)
Short Circuit Current: 9.6A (Imp 8.8A)| Short Circuit Current: 6.3A (Imp 6.0A)
Efficiency: 21%-22%| Efficiency: 21%-22%
Cell Type: Monocrystalline silicon| Cell Type: Monocrystalline silicon
Connector type: MC4| Connector type: MC4
Operating & Storage Temperature: -4° F to 185° F (-20° C to 85° C)| Operating
& Storage Temperature: -4° F to 185° F (-20° C to 85° C)
General| General
---|---
Weight: 15.4 lbs(7.0KG)| Weight: 13.2 lbs (6KG)
Solar Panel: 11 lbs(5.0KG)| Solar Panel: 8.8lbs (4KG)
Unfolded Dimensions: 26.861.81.0 in (681572.4 cm)| Unfolded Dimensions:
20.262.51.0 in (51.41582.4 cm)
Folded Dimensions: 26.816.51.0 in (68422.4 cm)| Folded Dimensions:
20.216.51.0 in (51.4422.4 cm)
Warranty: 12 months Warranty period may vary according to local laws and
regulations.| Warranty: 12 months Warranty period may vary according to local
laws and regulations.
Tested And Certified
|
Tested And Certified
60W Solar Panel| General
---|---
Rated Power: 60W(+/-5W)| Weight: 8.8 lbs(4KG)
Open Circuit Voltage: 21.6V (Vmp 18.2V)| Solar Panel: 4.4 lbs(2.0KG)
Short Circuit Current: 3.5A (Imp 3.3A)| Unfolded Dimensions: 2132.11.0 in
(53.781.52.4 cm)
Efficiency: 21%-22%| Folded Dimensions: 2116.51.0 in (53.7422.4 cm)
Cell Type: Monocrystalline silicon| Warranty: 12 months Warranty period may
vary according to local laws and regulations.
Connector type: MC4| Tested And Certified
Operating & Storage Temperature: -4° F to 185° F (-20° C to 85° C)|
- Rated Power is tested under Standard Test Conditions:1000W/m2, AM1.5, 25°C
coFlow TM is a trademark of Shenzhen EcoFlow Technology Limited (abbreviated as “EcoFlow”) and its affiliated companies.
Contact Us:
support@ecoflow.com
www.ecoflow.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>