AnkerMake V8110 M5C 3D Drucker Printers and filaments User Guide
- June 14, 2024
- AnkerMake
Table of Contents
AnkerMake V8110 M5C 3D Drucker Printers and filaments
PARTS
What is in the box
INSTALLATION INSTRUCTION
Powering On ****
Setting up the System
Leveling Heatbed
- Avoid moving the printer during the auto-leveling process.
Loading Filament
- Straighten the filament at least 0.78 inches / 2 cm and cut the tip of the filament at a 45° angle.
- Press and hold the extruder clip while continuing to insert the filament. Stop when you feel some resistance
AnkerMake Slicer
For the best printing experience, download and install the AnkerMake Slicer to your computer from
Printing
12-month limited warranty
Lifetime technical suppor
- (US) +1 800-221-0126
- (UK) +44(0)1604 936200
- (DE) +49(0)69 9579 7960
- (Middle East & Africa) +971 520750842
- (UAE) +971 8000320817
- (KSA) +966 8008500030
- (Kuwait) +965 22069086
- (Egypt) +20 8000000826
- (AU) +61 3 8331 4800
- (RU) +8(800)511-86-23
- (TR) +90 (850) 460 14 14
support@ankermake.com
support.mea@anker.com(Middle East & Africa)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>