PYLE PDWM2135 VHF Fixed Frequency Wireless Microphone System User Guide
- October 30, 2023
- Pyle
Table of Contents
PYLE PDWM2135 VHF Fixed Frequency Wireless Microphone System User Guide
Each Wireless Microphone System operates within the qualied wireless operating frequency range listed as: 174-216MHz.
This microphone system operates on high-eciency, low-consumption discharging techniques. Performance features include independent developed mobile frequency compression,expander circuitry, image frequency limiting circuits, multiple-checked silent and noise-free circuits, antenna diversity receiving circuit & switch impact noise defeat circuits.
The PDWM2135 – PDWM2140 – PDWM2145 were manufactured to be easy to use and still give you professional performance quality.
Simple Installation and Operation:
- Please note- select models come equipped with dierent transmitters and microphones.
- Unscrew the bottom of the microphone (or slide open the battery compartment tray of the belt-pack transmitter) to install two ‘AA’ Batteries. Screw the Battery cap back on.
- Plug your receiving unit into your mixer or amplier with a 1/4″ mono microphone cord.
- Plug the receiving unit into your electrical wall outlet.
- Turn the receiver ON by using the ON/OFF switch located at the front of the unit.
- There is a switch located on each of the two microphones that turns each microphone ON/OFF & mutes them individually
FEATURES AND SPECIFICATIONS
PDWM2135
System Features:
- VHF Narrow Band Receiver System
- Dual Frequency Design (Channel A/B)
- High Signal/Noise Ratio Performance
- Broad Frequency Response Range & Low Distortion
- Independent Adjustable Volume Control
- Dual Independent Channel Antennas
- RF Signal and AF Signal LED Indicators
- Radio Frequency and Audio Frequency
Handheld Microphones:
- RF Power Output: >13dBm
- Modulation Degree: >30KHz
- Power Current: <110mA
- Harmonic at Higher Degree: <60dB
- Modulation Pattern: FM
- Battery Powered, Require (2) x ‘AA’ Batteries -Each
System Receiver:
- Sensitivity: -95dBm (S/N:12dB)
- RF Image Rejection:-75dB
- Audio Dynamic Range: 95dB
- T.H.D.: <1%
- S/N Ratio: >70dB
- Neighboring Channel / Interference: >70dB
- Power: AC 120V, 60Hz
- Receiver Dimensions (L x W x H): 8.07” x 5.75” x 1.64”
What’s in the Box:
- Receiver Base
- (2) Handheld Microphones
Features
- VHF Narrow Band Receiver System
- Dual Frequency Design (Channel A/B)
- High Signal/Noise Ratio Performance
- Broad Frequency Response Range & Low Distortion
- Independent Adjustable Volume Control
- Dual Independent Channel Antennas
- RF Signal and AF Signal LED Indicators
- Radio Frequency and Audio Frequency
Transmitters
- RF Power Output: >13dBm
- Modulation Degree: >30KHz
- Power Current: <110mA
- Harmonic at Higher Degree: <60dB
- Modulation Pattern: FM
- Battery Powered, Require (2) x ‘AA’ Batteries -Each
System Receiver:
- Sensitivity: -95dBm (S/N:12dB)
- RF Image Rejection:-75dB
- Audio Dynamic Range: 95dB
- T.H.D.: <1%
- S/N Ratio: >70dB
- Neighboring Channel / Interference: >70dB
- Power: AC 120V, 60Hz
- Receiver Dimensions (L x W x H): 8.07” x 5.75” x 1.64” -inches
What’s in the Box:
- Receiver Base
- Handheld Microphone
- Body-Pack Transmitter
- Lavalier Microphone
- Headset Microphone
- 1/4” Audio Connection Cable
System Features:
- VHF Narrow Band Receiver System
- Dual Frequency Design (Channel A/B)
- High Signal/Noise Ratio Performance
- Broad Frequency Response Range & Low Distortion
- Independent Adjustable Volume Control
- Dual Independent Channel Antennas
- RF (Radio Frequency) Signal Indicator
- AF (Audio Frequency) Signal Indicator
Belt-Pack Transmitters:
- Modulation Pattern: FM
- RF Power Output: >13dBm
- Modulation Degree: >30KHz
- Power Current: <110mA
- Harmonic at Higher Degree: <60dB
- Battery Powered, Require (2) x ‘AA’ Batteries -Each
System Receiver:
- Sensitivity: -95dBm (S/N:12dB)
- RF Image Rejection:-75dB
- Audio Dynamic Range: 95dB
- T.H.D.: <1%
- S/N Ratio: >70dB
- Neighboring Channel / Interference: >70dB
- Power: AC 120V, 60Hz
- Receiver Dimensions (L x W x H): 8.07” x 5.75” x 1.64”
What’s in the Box:
- Microphone Receiver
- (2) Body-Pack Transmitters
- (2) Headset Microphones
- (2) Lavalier Microphones
VISIT US ONLINE:
Have a question? Need service or repair?
Want to leave a comment? PyleUSA.com/ContactUs
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>