SESSAK LIGHTING MARIO Wall Lamp Installation Guide
- June 4, 2024
- SESSAK LIGHTING
Table of Contents
MARIO
Installation Guide
MARIO Wall Lamp
Read the entire instructions before installing the luminaire Save the instructions for potential future needs. Disconnect the electrical power supply before installation or service.
Symbols that POTENTIALLY can be found on the luminaire and their meaning. CHECK the luminaire.
| Class I. The luminaire must be connected to protective earth.
---|---
|
Class II. The luminaire is double-insulated and is not to be connected to
protective earth.
| The product conforms to health, safety, and environmental protection
standards for products sold within the European Economic Area (EEA)
| The protective earth cable (usually yellow-green) is connected to the
terminal identified by this symbol.
| The phase (live) cable (usually brown) is connected to the terminal
identified by this symbol (L)
| The neutral cable (usually blue) is connected to the cable identified by
this symbol (N)
| States the minimum distance in meters to the area that is to be illuminated,
TAKE INTO ACCOUNT doors, widows, etc., that could possibly come within this
distance when they are opened.
---|---
| Ingress Protection class 21 (protection against dripping water)
| Ingress Protection class 44 (protection against splashing water)
| The HIGHEST ALLOWED power of the bulb(s) in Watts
****| Only for indoor use
| Is NOT to be thrown away with household waste. You can help in the
protection of the environment by taking discarded products to a recycling
station intended for them.
SESSAK OY AB – PORVO0 – FINLAND – WWW.SESSAK.FI
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>