CASIO HS-3(V) Stopwatch For All Sports User Guide
- June 13, 2024
- Casio
Table of Contents
CASIO HS-3(V) Stopwatch For All Sports
Product Information
The HS-3(V) HS-6 stopwatch is a versatile timekeeping device that can measure elapsed time with high precision. It features a display that shows minutes, hours, seconds, and 1/100th of a second. The stopwatch also has a SPLIT/LAP indicator that indicates whether it is in SPLIT mode or LAP mode.
Product Usage Instructions
- Press the button labeled A to start and stop the elapsed time measurement.
- While an elapsed time measurement is in progress, press the button labeled B to momentarily freeze a SPLIT or LAP time on the display. Timing continues internally. Press the button again to display the ongoing time measurement.
- To toggle between the SPLIT time mode and LAP time mode, press the button labeled C.
- In SPLIT mode, a SPLIT is the time from the start of an event up to any specific point. In LAP mode, a LAP is the time for one segment (lap) of an event.
- To reset the time to all zeros while the elapsed time measurement is stopped, press the button labeled B.
- You can repeat the LAP/SPLIT time operation as many times as you want.
- If you want to freeze a SPLIT time, press A in SPLIT mode. To release the frozen SPLIT time, press B.
- If you want to freeze a LAP time, press A in LAP mode. To release the frozen LAP time, press B.
- To reset the stopwatch to zero, press B.
For more detailed information and additional instructions, please refer to the user manual available at https://manual-hub.com/.
USER’S GUIDE HS-3(V) HS-6
- A sticker is affixed to the glass of this stopwatch when you purchase it. Be sure to remove the sticker before using the stopwatch.
- Depending on the stopwatch model, the configuration of your stopwatch may differ somewhat from that shown in the illustration.
USING THE STOPWATCH
- A: Press this button to start and stop the elapsed time measurement.
- B: Press this button while an elapsed time measurement is in progress to momentarily freeze a SPLIT or LAP time on the display (timing continues internally). Press again to display the ongoing time measurement. You can repeat the LAP/SPLIT time operation as many times you want. Pressing this button while the elapsed time measurement is stopped resets the time to all zeros.
- C: Press this button to toggle between the SPLIT time mode and LAP time mode.
The maximum elapsed time that can be measured is 9 hours, 59 minutes, and 59.99 seconds.
- A SPLIT is the time from the start of an event up to any specific point.
- A LAP is the time for one segment (lap) of an event.
How to operate the stopwatch
Normal time measurement
SPLIT timing
LAP timing (Lap timing for each segment of an event)
Documents / Resources
|
CASIO HS-3(V) Stopwatch For All
Sports
[pdf] User Guide
HS-3 V Stopwatch For All Sports, HS-3 V, Stopwatch For All Sports, For All
Sports, All Sports
---|---