N S KEY E31 Smart Lock User Manual

: June 4, 2024
: N S KEY

Table of Contents

N S KEY E31 Smart Lock
Special Attention:
Lock Structure
Mortise
Installation
Installation Diagram
Specifications
Registration
Features
User Management
Settings
Trouble Shooting
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

N S KEY E31 Smart Lock

N-S-KEY-E31-Smart-Lock-User-Manu

Special Attention:

Mechanical keys please keep outd0or, just in case keys lock indoors.
Please charge for the battery when low wattage alarm.
Reading this manual carefully before installation, and keep it for future reference.

Lock Structure

Mortise

Installation

Turn the handle (Adjust as needed)
Notice: Adjust the handle according to the door opening direction, The arrow must keep pointing to the same direction of the handle.

Installation Diagram

Step 1 Install Mortise

Step 2 Install Square Shaft

Step 3 Install Sliding Screw Casing

The screw casing place is adjustable from 55mm to 100mm far from the square shaft. Depending on the location of the hole drilling or the old door hole.

Step 4 Connect Front and Back Panels Wires

Step 5 Install Back Panel

Step 6 Install the Battery

Specifications

Device Reset
Open the lock back panel battery cover plate >Press the “Reset” button for 5 seconds, then enter “000#”. A prompt will be placed once it’s reset successfully.

Registration

Connect the lock to the phone

For Android mobile phones, please scan the left QR code as above
Apple mobile phone, please Scan the right QR code as above
You can also search for TTLOck in the APP store(Google Play)to download
Register a new account (phone number or email) or log in with an existing account.
Touch the lock screen to light, click “+ Add Lock”
The lock nearby will appear on the phone screen, Click “+”
Re-name the lock
The lock was added successfully

NOTE:
TTLOck supports multiple types of lock devices. You must first select the lock type. The lock needs to be added by the app after entering the add mode. Generally, a lock that has not been added, as long as the lock the keyboard is touched, it will enter the add mode. Locks that have already been added need to be deleted on the app before they can be added to the add mode by touching

Features

Passage mode function
Stainless steel handle
Smart APP operation & Unlock Remotely & User unlock records
Voice guided operation
Auto secure & break-in alarm
Voice setting function
Auto-locking time setting function
Screen locking
Anti-theft Password
Smart freeze
Emergency power supply through USB
Material of Lock Body
Material of Lock
SS304
Zinc Alloy

Note
The lock can be opened using default code 123456 followed by # in trial mode

User Management

Bluetooth management
Make sure there is no problem with Bluetooth communication. After connecting the phone to the door lock as above, Click” “as shown in figure2-1 to unlock.(the phone is within 5 meters from the door lock)

Remote control management(0ption)
TTLOck is directly connected via Bluetooth and is not connected to the network itself, which is why it is not vulnerable to network attacks. The gateway is an accessory of the smart lock, it is the bridge Connecting the smart lock and the home wifi network. Through the gateway, users can remotely view and calibrate the lock clock, read the unlocking records f passwords, ICs, fingerprints, etc. in a timely manner, and remotely delete and modify passwords. After confirming that your phone and door lock are connected to the gateway, lick” ” as shown as figure 2-1 to unlock. YOu can unlock it anywhere you have a network.(How to set up the gateway to connect to your phone refer to step 5.3)

Setting Passcode
Passcodes are also a way to unlock. After entering the pasSCOde on the locked keyboard, press the unlock button in the lower right corner to unlock. PasSCOdes are divided into permanent, time-umited, Single, clear, cycle, and custom.

Send e-Key
Click on the” as shown in the figure, you can send the key to other users of TTlock to Send eKey to authorize the unlocK{the receiver must be downl0ad the APP and set up an account) Select e- key format (Timed, permanent, One-time, Recurring) Enter the recipient’s account of TTlock, set the name and effective time of the key, Can choose to allow remote unlocking or disallowing, authorized administrator or not authorized, as shown in figure>send-The recipient’s account has Bluetooth unlock permission (Only the administrator can authorize the ordinary key. After the authorization is successful, the authorized key is the same as the administrator s interface. YOu can send keys, passwords, etc. to otherS. However, the authorized administrator can no longer authorize others.)

Add a card and add card remotely
Supports opening doors through various ICcards. Before an IC card is used to open the door, it nee to be added first. The adding process needs to be performed by the app besides the lock. The validity period of the IC can be set, it can be permanent, or it can be limited in time. After setting, you can also. Modify its validity period.

Add Card
Add card remotely (You must add gateway first!)

The Admin password management Click” “as shown in figure 2-1Basics See Admin Passcode as shown in finger2-2

Settings

input PassCode on the keypad of lock =#” to unlock.

e-Key management
as shown in figure 2-1figure 2-3 to manage the keys you send, The key eKeys management here refers to Bluetooth key management. After the administrator has Successfully added the lock, the administrator will have the highest management rights of the work. He can send keys to other people, specify the time limit, and select time-limited permanent or single-time Bluetooth key permissions. Add management of expiring keys, that is, reminders of
expired keys. The administrator can manage all the keys issued by him, including clearing the keys, resetting the keys, sending the keys, adjusting the validity period of the keys, and viewing the unlock records of the keys. For keys that are about to expire (non-administrator users), lOck users are about to expire (yellow shows the number of days remaining), and expiration reminders (red font).

Passcode management
Click”e” as shown in figure 2-1figure 2-4All generated passwords can be viewed and managed in the password management module. This includes a password change, password deletion, password reset, and password unlocks record.

Unlock records
“as shown in figure 2-1~figure 2-5you can query your unlock record as shown in Records Click figure