InnovaSpa 701-G-0042 Hot Tubs User Guide
- October 30, 2023
- InnovaSpa
Table of Contents
InnovaSpa 701-G-0042 Hot Tubs
Product Information
The Fantom Spa is a luxurious outdoor spa that provides a relaxing and
rejuvenating experience. It is designed to be placed on a solid and well-
leveled surface, such as a wooden patio, lawn, rock dust, or concrete slab.
The spa has external dimensions of 74” x 78” and is equipped with an external
draining valve for easy water drainage. The pump and spa pack are located on
the left side, and the GFI wire exit is minimal for a neat and tidy
installation. The spa is equipped with a filter cartridge located in the
front-left and comes with a 15′ wire (3′ inside and 12′ outside) that can be
plugged into a standard 120V electrical socket. The spa can also be converted
to 240V (40amp) with the help of an electrician. Buying a spa is a project in
itself and may require some time and thinking from every
new spa owner. Here are some additional specs and answers to the common
questions about your Fantom spa
Product Usage Instructions
- Choose a solid and well-leveled surface to place the spa on, such as a wooden patio, lawn, rock dust, or concrete slab.
- Make sure your structure can withstand the weight of the spa once filled.
- Fill the spa with water using your garden hose through the skimmer.
- Plug the spa into a standard 120V (15amp) outdoor electrical outlet or convert it to 240V (40amp) with the help of an electrician.
- Make sure the spa cover is safe from ice falling from your roof.
- Retain access to the pump and mechanics via the removable panel if placing the spa in a corner.
- Use the model #139-rock-it cover lifter for the Fantom spa, which can be ordered from your retailer.
- Check the user’s guide for details about starting and maintaining the spa.
SPECIFICATIONS
*(FACING THE TOPSIDE)**
- DIMENSIONS 74’’ x 78’’
- EXTERNAL DRAINING VALVE Yes
- EXTERNAL DRAINING VALVE LOCATION Left side
- SPA PACK LOCATION Left side
- PUMP LOCATION Left side
- EXIT OF THE GFI WIRE Front-Left
- MINIMAL SUPPORT SURFACE**
- Witdh: 74.5’’
- Length: 77.5’’
- FILTER CARTRIDGE #105-0509
FEATURE
- Place on a solid and well-leveled surface (wooden patio, lawn, rock dust, concrete slab, etc.)
- Fill with water, with your garden hose through the skimmer.
- Plug it into a standard 120V (15amp) outdoor electrical outlet or convert it to 240V (40amp) with the help of an electrician.
Cover Lifter
The model #139-rock-it is suitable for the Fantom spa and can be ordered from your retailer.
Access
- The four sides of the spa are made up of removable panels allowing access to the pump and mechanics.
- The spa cover requires a minimal space of 18 inches when opened and slid completely to the side.
Q&A
-
Can I install it on my patio?
Yes, if you make sure your structure can withstand the weight of the spa once filled. Make sure your spa cover is safe from the ice falling from your roof -
Can I put it in a corner?
Yes, only if you retain access to the pump and mechanics via the removable panel. Keep in mind that the spa cover will slide along one side of your spa. -
How long is the power cord?
The spa is equipped with a 15’ wire (3′ inside and 12′ outside). It’s a GFCI- protected wire cord with a reset button ready to plug into a standard 120V electrical socket. DO NOT PLUG INTO A GFI RECEPTACLE OR USE WITH AN EXTENSION.
For details about starting and maintaining the spa, be sure to check the
user’s guide.
**All dimensions are approximate and may slightly vary (+- 1’’)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>