InnovaSpa Storm Spa Home Instructions
- October 30, 2023
- InnovaSpa
Table of Contents
GETTING READY TO BRING YOUR SPA HOME EUROPE
Instructions
InnovaSpa Storm Spa Home
Buying a spa is a project in itself and may require some time and thinking from every new spa owner. Here are some additional specs and answers to the common questions about the Storm spa.
SPECIFICATIONS (FACING THE TOPSIDE*)
DIMENSIONS | 215,9 x 180,3 x 86,4 cm |
---|---|
EXTERNAL DRAININGVALVE | No interior valve |
INTERIOR DRAINING VALVE LOCATION | Front |
SPA PACK LOCATION | Front |
PUMP LOCATION | Front |
MINIMAL SUPPORT SURFACE** | Width 127 cm Length 168 cm |
FILTER CARTRIDGE | #105-0905 |
FAQ
Can I install it on my patio?
Yes, if you make sure your structure can withstand the weight of the spa once
filled. Make sure your spa cover is safe from the ice falling from your roof.
Can I put it in a corner?
Yes, only if you retain access to the pump and mechanics via the removable
panel. Keep in mind that the spa cover will slide along one side of your spa.
What product should I use to sanitize the water?
Bromine, lithium or biguanide are recommended.
The use of chlorine may result in the cancellation of your warranty.
- The connection must be made by a certified electrician.
For details about starting and maintaining the spa, be sure to check the
user’s guide.
**All dimensions are approximate and may slightly vary.
Place on a solid and well-leveled surface (wooden patio, lawn, rock dust, concrete slab, etc.).
Fill with your garden hose through the skimmer.
Cover lifter
The model #139-rock-it is suitable for the spa and can be ordered from your retailer.
Access
The four sides of the spa are made up of removable panels allowing access to
the pump and mechanics.
The spa cover requires a minimal space of 46cm when opened and slid completely
to the side.
Spa Cover (Opening Direction)
- TOPSIDE (front)