InnovaSpa Stream Hot Tubs and Swim Spas User Guide
- October 30, 2023
- InnovaSpa
Table of Contents
InnovaSpa Stream Hot Tubs and Swim Spas
Product Information
Stream Spa
The Stream Spa is a luxury hot tub that requires careful consideration and
planning before purchase. The spa measures 210.8 x 198.1 x 86.4 cm and
features an external draining valve, front interior draining valve location,
front spa pack location, and front pump location. The spa can be placed on a
variety of surfaces including wooden patios, lawns, rock dust, and concrete
slabs. The spa is equipped with a skimmer that allows for easy filling using a
garden hose. The spa also comes with a compatible cover lifter model #139
-rock-it that can be ordered from your retailer.
The spa requires a minimal support surface of 200 cm in width and length.
Access to the pump and mechanics is provided by removable panels on all four
sides of the spa. The spa can be sanitized using bromine, lithium, or
biguanide, but the use of chlorine may void the warranty. The spa cover
requires a minimum space of 46cm when opened and slid completely to the side.
Product Usage Instructions
- Before using the Stream Spa, ensure that it is placed on a solid and well-leveled surface.
- Fill the spa with water using a garden hose through the skimmer.
- Make sure to retain access to the pump and mechanics via the removable panel if placing the spa in a corner.
- When opening the spa cover, ensure that there is a minimum space of 46cm available for it to slide completely to the side.
- To sanitize the water in the spa, use bromine, lithium, or biguanide. Do not use chlorine as it may void the warranty.
- For more information about starting and maintaining the spa, refer to the user’s guide provided with the product.
- Note that all dimensions provided are approximate and may vary slightly.
Buying a spa is a project in itself and may require some time and thinking from every new spa owner. Here are some additional specs and answers to the common questions about the Stream spa.
*SPECIFICATIONS (FACING THE TOPSIDE)**
DIMENSIONS| 210,8 x 198,1 x 86,4 cm
EXTERNAL DRAINING VALVE| yes
INTERIOR DRAINING VALVE LOCATION| Front
SPA PACK LOCATION| Front
PUMP LOCATION| front
MINIMAL SUPPORT SURFACE**| Width 200 cm
Lenght 200 cm
FILTER CARTRIDGE| #105-0905
FAQ
Can I install it on my patio?
- Yes, if you make sure your structure can withstand the weight of the spa once filled. Make sure your spa cover is safe from the ice falling from your roof.
Can I put it in a corner?
- Yes, only if you retain access to the pump and mechanics via the removable panel. Keep in mind that the spa cover will slide along one side of your spa.
What product should I use to sanitize the water?
- Bromine, lithium or biguanide are recommended. The use of chlorine may result in the cancellation of your warranty.
- The connection must be made by a certified electrician.
- For details about starting and maintaining the spa, be sure to check the user’s guide.
- Place on a solid and well-leveled surface (wooden patio, lawn, rock dust, concrete slab, etc.).
- Fill with your garden hose through the skimmer.
Cover lifter
- Model #139-rock-it is suitable for the spa and can be ordered from your retailer.
Access
- The four sides of the spa are made up of removable panels allowing access to the pump and mechanics.
- The spa cover requires a minimal space of 46cm when opened and slid completely to the side.
Spa Cover (Opening Direction)
All dimensions are approximate and may slightly vary.