TOOLOTS JY-450F Horizontal Flow Packing Machine User Manual
- October 30, 2023
- TOOLOTS
Table of Contents
TOOLOTS JY-450F Horizontal Flow Packing Machine
Preface
Thanks for use JY Series Horizontal flow packing machine!
Please read the important safety notes carefully before operate instrument.
Safety notes
- Unauthorized or untrained worker is not allowed to operate this machine
- Read manual book carefully before operate this machine
- Insure all equipment are installed and tested well before start; earthing wire must connect with machine
- Insure all working tools/ parts are removed from conveyor belt before start
- Do not touch any electrical parts before power off
- Workers must stand near packing machine while machine start
- Keep your hands far away from all parts which has high temp.
- Keep hands far away form sealing jaw while machine running
- Do not run machine over speed
- Insure power is off while clean/maintain
- Do not operate machine under influence of tiredness or drunk.
- Unauthorized refit is not allowed without permission from our company
- Contact with us if any introduction makes you confusing.
Feature & Application
JY Series automatic horizontal wrapping machines for confectionery, bakery and
chocolate, non-food, cosmetic and pharmaceutical products and so on.
All the machines are fully electronic and have a modular construction that
allow high levels of flexibility and a wide range of diversified products to
handle.
The quality of all JY machines is assured by “High precision with reliable
quality”
Specification
| Packaging speed | 30-180 package/min |
|---|---|
| Packaging size | Length 100-500mm Width 50-215mm |
Height 10-70mm
Max. film width| 450mm
Film thickness| ≥0.020
Powder| 2.5kw
Voltage| 220v
Frequency| 50/60Hz
Machine weight| 550kg
Machine dimension| 45009501620mm
Machine installation & power supply
- This machine should stand on flat consolidus ground, leave more space for operate and maintain
- Keep machine far away from chemical, acidic and explosive items
- Put packing machine at final position and adjust height depend on factory requirement
- Install product feeding conveyor belt on packing machine, joint and tight it by bolts
- Install conveyor chain, loose hand wheel (left) on the end of conveyor; put chain on gear wheel and insert finger pusher into tunnel.
- Product feeding parts
- Film roller
- Photocell eye
- Date printer
- Panel board
- Panel board for date printer
- Horizontal sealing parts（inside）
- rotary brush
- package conveyor belt
- Vertical sealing parts（inside）
- bag forming devices
- front door
- film winding structure
Panel board introduction & operation
Panel board introduction
-
Vertical temp. Controller: adjust and show vertical sealer temp.
Temp. Controller Switch: switch on/off for vertical sealing part -
Horizontal Temp. Controller: adjust and show horizontal sealer temp.
Temp. Controller Switch: switch on/off for horizontal sealing part -
Touch screen：show & change all parameter here
-
Power indicator：it is lighting if main power on
-
Start: start packing machine; it is same function as “RUN” in panel.
-
Stop：Stop machine
-
Cycle stop ： packaging machine will stop at special setting location(sealing jaw angle)
-
JOG：machine works one time while press one time.
-
Speed controller：adjust packing speed in per minute.
Operation
-
insert electricity plug and switch on main power switch as follow
For your safety, please make sure power is off before connect cables, and earthing wire must be installed. -
film install：
Please follow film drawing and put film on each rollers
-
bag former adjust
Please change bag former width and height depend on different product size. -
bag former height adjust bolt 1-1 1-2：change height by this bolt
-
bag former angle adjust bolt：adjust bag former angle
-
bag former width adjust：please turn hand wheel in order to change bag former width
Free spare parts and working tools
Spare parts list
| Name | Unit | Quantity |
|---|---|---|
| Electricity plug | Piece | 1 |
| Cutting blade | Piece | 1 |
| Finger type pusher | Piece | 5 |
| Heating tubes | Piece | 2 |
| Heating coil | Piece | 1 |
| Electrical clamp | Piece | 3 |
| Copper sheet | Piece | 1 |
| Speed control belt | Piece | 1 |
| Thermal couple(horizontal) | Piece | 1 |
| Thermal couple(vertical) | Piece | 1 |
| Package conveyor belt | Piece | 1 |
| potentiometer | Piece | 1 |
| Belt for belt | Piece | 5 |
| regulating handle for Photoelectric eye | Piece | 1 |
| Ink roller for date printer | Piece | 1 |
| Copper letter(A-Z;0-9) for date printer | Set | 1 |
Working tools
| Name | Unit | Quantity |
|---|---|---|
| Spanner （8～10，12～14，17～19） | Set | 1 |
| Allen Key（3～12mm） | Set | 1 |
| Monkey spanner | Piece | 1 |
| Straight Screw driver | Piece | 2 |
| Cross screw driver | Piece | 2 |
| nipper pliers | Piece | 1 |
| clamp Pliers | Piece | 1 |
| Machine oil pot | Piece | 1 |
| Copper brush | Piece | 1 |