electro-harmonix 711784 Switchblade Deluxe Channel Selector User Manual
- June 6, 2024
- electro-harmonix
Table of Contents
711784 Switchblade Deluxe Channel Selector
SWITCHBLADE+
Deluxe Channel Selector
Congratulations on your purchase of the Electro-Harmonix SWITCHBLADE+! With a fully passive audio path and active LED indication, the SWITCHBLADE+ provides a simple and versatile interface for routing your signal.
– Controls –
A/B Footswitch (LED) - Press this switch to route the input signal to
either OUT A (Red LED) or OUT B (Green LED).
A+B Footswitch (LED) - Press this switch to route the input signal to
both OUT A and OUT B. When A+B is engaged (Red LED), the A/B Footswitch has no
effect on the signal path.
– I/O –
INPUT - Connect the output of your instrument or another effects pedal
to this jack.
TUNER - Connect this jack to the input of a tuner device or another
effects pedal. This jack is hardwired to the INPUT jack and provides a direct
output regardless of the state of the unit.
OUT A - Connect this jack to the input of an amplifier or the input of
another effects pedal. Depending on the state of the A/B and A+B controls,
this jack will output either the direct input signal or no signal. When the
A/B LED is lit red or the A+B LED is lit up, OUT A is selected.
OUT B - Connect this jack to the input of an amplifier or the input of
another effects pedal. Depending on the state of the A/B and A+B controls,
this jack will output either the direct input signal or no signal. When the
A/B LED is lit green or the A+B LED is lit up, OUT B is selected.
– Power –
The SWITCHBLADE+ can be powered by a 9V battery or a 9VDC battery
eliminator capable of delivering at least 16mA. The optional 9V power supply
from Electro-Harmonix is 9.6DC-200BI (same as used by Boss® & Ibanez®) 9.6
Volts DC 200mA. The power supply must have a barrel connector with center
negative.
The SWITCHBLADE+ can also operate without power, since the audio path is
fully passive. With no power, however, the LED indication will not function.
When A+B is engaged, the input impedance at the INPUT jack is equal to 50k in
parallel with the combined input impedances of the devices connected to the
TUNER, OUT A, and OUT B jacks. When A+B is not engaged, the input impedance at
the INPUT jack is equal to 100k in parallel with the combined input impedances
of the devices connect to the TUNER jack and OUT A or OUT B.
– WARRANTY INFORMATION –
Please register online at http://www.ehx.com/product-registration or complete
and return the enclosed warranty card within 10 days of purchase. Electro-
Harmonix will repair or replace, at its discretion, a product that fails to
operate due to defects in materials or workmanship for a period of one year
from date of purchase. This applies only to original purchasers who have
bought their product from an authorized ElectroHarmonix retailer. Repaired or
replaced units will then be warranted for the unexpired portion of the
original warranty term.
If you should need to return your unit for service within the warranty period,
please contact the appropriate office listed below. Customers outside the
regions listed below, please contact EHX Customer Service for information on
warranty repairs at info@ehx.com or
+1-718-937-8300. USA and Canadian
customers: please obtain a Return Authorization Number (RA#) from EHX Customer
Service before returning your product. Include with your returned unit: a
written description of the problem as well as your name, address, telephone
number, e-mail address, and RA#; and a copy of your receipt clearly showing
the purchase date.
United States & Canada EHX CUSTOMER SERVICE ELECTRO-HARMONIX c/o NEW SENSOR CORP. 47-50 33RD STREET LONG ISLAND CITY, NY 11101 Tel: 718-937-8300 Email: info@ehx.com
Europe JOHN WILLIAMS ELECTRO-HARMONIX UK 13 CWMDONKIN TERRACE SWANSEA SA2 0RQ
UNITED KINGDOM Tel: +44 179 247 3258 Email: electroharmonixuk@virginmedia.com
This warranty gives a purchaser specific legal rights. A purchaser may have
even greater rights depending upon the laws of the jurisdiction within which
the product was purchased.
To hear demos on all EHX pedals visit us on the web at www.ehx.com Email us at
info@ehx.com
FCC COMPLIANCE
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment under FCC rules.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>