LG A913BM A9 Cord Zero Cordless Stick Vacuum Cleaner User Guide

: June 4, 2024
: LG

Table of Contents

LG A913BM A9 Cord Zero Cordless Stick Vacuum Cleaner
OPERATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LG A913BM A9 Cord Zero Cordless Stick Vacuum Cleaner

OPERATION

Getting Started
Before Using the Appliance

Are properly assembled before using the appliance.
Properly before using the appliance. If the dust bin cover is left open, the suction strength may deteriorate and affect the cleaning performance.
prevent overheating. If the appliance becomes overheated after extended use, it may automatically turn off. If this occurs, leave the appliance in a cool, well-ventilated area for about an hour before
turning on the power again.
Foreign object such as a sock or stocking before using the appliance. Any foreign object on the inlet port or extension pipe will prevent the appliance from functioning properly.
and humidity may cause static electricity to accumulate on the appliance. Please contact LG Electronics customer information center if the problem persists.
Temperatures as the battery runtime may deteriorate severely if used at temperatures lower than 41 °F (5°C) or higher than 100 °F (38°C) for an extended period of time.
The appliance when cleaning an elevated surface. place it flat on the floor when not in use. Leaning the appliance against a wall or chair can result in product damage or personal injury if the
appliance falls.
Brushes of the nozzles and tools free from grit, sand, or abrasive objects.
Specifications section for battery runtime details. dependent on the surface type and the suction power.
Recommendations when cleaning flooring, carpets, and rugs. display as they may scratch these surfaces.

Assembling Attachments
Nozzles and tools can be attached to either the product body or the end of the extension pipe.

CAUTION

A tool connected may cause the motor to overheat.
Safety device to prevent overheating. If the appliance becomes overheated after extended use, it may automatically turn off. If this occurs, leave the appliance in a cool, well-ventilated area for about an hour before turning on the power again.
The appliance is running. Doing so may cause product damage.

Insert the fully charged battery into the cavity at the bottom of the handle on the product body.
Attach the nozzles, tools, or extension pipe by sliding them onto the inlet b on the body until they click into place. The nozzles and tools can also be attached to the end of the extension pipe b.
Adjust the extension pipe by pressing the length adjustment button d on the back of the pipe and sliding it until it clicks into place at the desired length.
Press the Power button to activate the Normal mode.

Adjusting the Suction Power
Adjust the suction power using the suction power adjustment button on the handle.

Power Button

Power button to turn the appliance Power button to activate Normal
Suction Power Up (+) Button / Turbo Mode increase the suction power. (Normal~Power~Turbo) seconds to activate Turbo mode from Power mode.
Suction Power Down (-) Button decrease the suction power. (Turbo~Power~Normal)

Charging the Battery
Before Charging the Battery

The charging station and the power outlet.
Battery usually takes about 4 hours. It will take twice as long to charge both the main and auxiliary batteries.
Temperature is below 41 °F (5°C). Only charge the battery when indoor temperatures are between 41 °F (5°C) and 100 °F (38 °C).
Due to the battery characteristics, runtime is shortened after using the appliance repeatedly for an extended period.
Blink when the battery needs to be recharged. Use the appliance with a fully charged battery.
Arging on the charging station, the auxiliary battery will only start charging once the main battery is fully charged.
Swap the positions of the two batteries periodically, between the main body and the auxiliary charging station.

Charging the Product Body
Storing the appliance on the charging station automatically recharges the battery.

Press the Power button to turn the appliance off.
Put the product body onto the charging station by aligning it to the hook a of the charging station.
- cator starts to blink and begins charging the battery.
- Level indicator lights up briefly and then turns off to save energy.

WARNING
The product body onto the charging station. If the appliance falls off the charging station, it could cause injuries, property damage or product damage.

Charging the Auxiliary Battery
An auxiliary battery can be stored and charged in the base of the charging station.

CAUTION
Assembling or disassembling the battery from the product body or the charging station to avoid personal injury.

Remove the discharged battery from the product body by pressing the battery release button on either side of the battery and pulling.
Insert the discharged battery into the auxiliary charging station. he battery will only fit into the cavity if aligned properly.
The auxiliary charging indicator blinks while recharging is in progress.
When charging is complete, the auxiliary charging indicator lights up briefly and then turns off to energy.

Using the Nozzles and Tools

Before Using the Nozzles and Tools
Some accessories are only available on some models.
Specialized attachments can help you clean more effectively. Tools and nozzles can be attached to the product body or the extension pipe.
- On the floor, carpet, or bedding.
- Old with a motor and may make a sound when operating.

CAUTION
Nozzle or Universal Nozzle on PVC or polyurethane mats for infants and children. The mat may stick to the nozzle, making it difficult to operate, causing damage to the mat or static electricity on the appliance. Clean mats using the crevice tool.

Universal Nozzle
Use this nozzle to clean carpets or rugs.

Hard Floor Nozzle
Use this nozzle to clean hard floor surfaces.

Pet Nozzle
Use this nozzle for soft surfaces and pet hair removal.

CAUTION
The surfaces are listed below. Do not use it to clean coated or lacquered floors especially, as repeated use can wear down the coating.