alza power APW-FMTV2 FM Transmitter User Manual

alza power APW-FMTV2 FM Transmitter

THANK YOU FOR CHOOSING US!
We value your trust. We hope that you will be happy with our product, and as excited about it as we are. We try to offer products of the highest quality that satisfy even the most demanding requirements. If you are satisfied, it would make us very happy if you chose us again the next time you make a purchase.
We are environmentally conscious, therefore we use special eco-friendly packaging. Please recycle!

Recycling and Environmental Protection

We try to avoid using plastic packaging and film and only use them when they are absolutely necessary to protect the product. So how are we different?

Packaging you can eat… Well, almost. 🙂

• We use ink made from soybeans as opposed to classic petroleum-based ink.
• The majority of our packaging is made from 100% recyclable paper.
• We limit the use of adhesives. If absolutely necessary, we make sure to choose only wa-ter-soluble ones.

We think globally, which means that we actively search for eco-friendly solutions. We keep an eye on trending technology and place findings of the scientific community into practice. We don‘t just try to meet quotas and mandates, we aim to exceed them.

TECHNICAL PARAMETERS

9 V⎓ 2 A (18 W)

12 V⎓ 1.5 A (18 W)

USB-C (20 W) Output| 5 V⎓ 3 A (15 W)

9 V⎓ 2.22 A (20 W)

12 V⎓ 1.67 A (20 W)

Output USB-A| 5 V⎓ 1 A (5 W)
Supported fast charging standards| QC3.0, PD
Dimensions| 80.8 × 52.6 × 44.2 mm
Weight| 43 g
Operating temperature| -20–60 °C
Storage temperature| -20–75 °C
Operating humidity| 20 – 60 %
Storage humidity| 20 – 85 %

OVERVIEW

1. USB-A connector: Connector for connecting a USB Flash drive (up to 32 GB)
2. USB-A (18 W) connector: Connector for connecting a USB-A charging cable
3. PD USB-C (20 W) connector: Connector for connecting a USB-C charging cable
4. Next track: Button to skip to the next track
5. Previous track: Button to skip to previous track
6. Connector for insertion into the power connector of a cigarette lighter
7. Display
8. Microphone
9. Multifunction button Frequency / volume, etc. adjustment button
10. Backlight button
11. Backlight

USE

Basic control

to turn it on. Slide the modulator away from the car’s power connector to turn it off.
Car battery voltage display| After connecting the modulator to the power connector, the display shows the car battery voltage for 1 second.
Frequency setting| Press and hold the multifunction button and then turn it or use the Previous / Next track buttons.
Start / Pause audio files| Briefly press the multifunction button once.
Answer / End a call| Briefly press the multifunction button once.
Rejecting a call| Press and hold the multifunction key.
Call the last number| Press the multifunction button twice.
Set volume| Turn the multifunction button to the left or right.
Skip to previous track| Press the Previous track button.
Skip to next track| Press the Next track button.
Backlight mode| Press the backlight button repeatedly.
Select the playback source of audio files| Press and hold the Next track button to select the audio file source: Bluetooth – USB Flash disk. When the source from which you want to play audio files appears, release the button.
Activate voice control of the phone| After pairing with Bluetooth, press and hold the multifunction key.
---|---

Setting up your own FM station

1. Connect the modulator to the power connector (12 V – 24 V) in your car.
2. Tune to any unoccupied frequency from 87.5 MHz to 108 MHz on the car radio.
3. To tune to the same frequency on the modulator, first press and hold the multifunction button until the frequency flashes on the display. Then turn the multifunction button or use the Previous / Next track buttons to tune in the same frequency. Wait about 3 seconds or press the multifunction button to confirm and the modulator will automatically connect to the radio.

Pairing using Bluetooth

1. Connect the modulator to the power connector (12 V – 24 V) in your car.
2. “BT” and the frequency will flash alternately on the display, which means that the modulator is ready for Bluetooth pairing.
3. Turn on the Bluetooth function on your phone and start searching for available devices.
4. Select “APW-FMTV2” from the list and the pairing process starts.
5. Once the display stops flashing and the FM frequency is displayed, the pairing process has been completed successfully.
   Note: To ensure a stable connection, keep a maximum distance of 5 m between the telephone and the modulator.

Automatic pairing
The next time you turn on the modulator, it automatically pairs with the last paired phone. We therefore recommend that you switch on the Bluetooth function before switching on the modulator.

USB Flash Drive Connection
Insert a suitable USB Flash Drive into the USB-A port. The modulator supports USB Flash drives up to 32 GB. If you would like to use a flash drive with a larger capacity, it is necessary to provide an external power supply.

Playing audio files
You will be able to play audio files from your phone (via Bluetooth) or by connecting a USB flash drive.
If you have multiple sources connected to play audio files at the same time, press and hold the button Next track. The display will show the individual sources as follows: Bluetooth – USB Flash disk. When the source from which you want to play audio files appears, release the button. If you select Bluetooth, you will need to press the multifunction button to start playback. If you select a USB Flash Drive, playback will start automatically.
Supported audio file formats: MP3/WMA/FLAC.
Note: Due to the wide range of devices (USB Flash Drives) on the market, full compatibility with all available devices cannot be guaranteed. It is necessary to test the used device first and verify its compatibility. We recommend any formatting to the FAT32 file format. Files with a lock or other security features may not be playable. Play tried or unprotected files.

Set volume
Adjust the volume by turning the multifunction button to the left or right.
When playing audio files from the phone, we recommend that you first set the maximum vol-ume of the phone and modulator and then adjust it with the volume control on the car radio.

Calls
If you have your smartphone connected to the modulator via Bluetooth, you will also be able to control calls via the modulator.

1. Answer/End call – press briefly the multifunction button.
2. Rejecting call – press and hold the multifunction button.
3. Last number call – press the multifunction button twice.

Charging

Use a suitable power cord (not included) to connect the device you want to charge to the modulator. The charging process starts automatically.

Charging slots output voltage:

• USB-A: 5 V/ 3 A (15 W); 9 V/ 2 A (18 W); 12 V/ 1.5 A (18 W),
• USB-C: 5 V/ 3 A (15 W); 9 V/ 2.22 A (20 W); 12 V/ 1.67 A (20 W).

If you use both charging ports at the same time, the maximum possible output voltage will be 5 V / 3 A (15 W).

Backlight colour selection
Press the backlight button repeatedly to select your preferred colour. You can choose from the following colours: red, blue, green, yellow, purple, purple, white, rainbow colours and the rainbow colour gradual on / off mode.

Voice assistant activation
Activation of the voice assistant is only possible after pairing the smartphone with the mod-ulator via Bluetooth.
Then press and hold the multifunction button and the voice assistant of your smartphone will be activated. The modulator supports Siri, Bixby and Google Assistant voice assistants.

SAFETY INFORMATION

• Please check compatibility with the information specified on the product before use.
• This product is not a toy. It may contain small components. Please keep away from children.
• Do not use the product to charge devices that require a charging current greater than that specified in the technical specification. Once your device is fully charged, disconnect it from the product.
• Always connect and disconnect a USB Flash drive or memory card before connecting the product to the cigarette lighter socket.
• Due to the wide range of devices (SD cards and USB Flash drives) on the market, it is not possible to guarantee full compatibility with all available devices. If the product does not read data from USB flash drives or memory cards, try inserting the connected storage device again.
• Unplug the product from the cigarette lighter socket when not in use.
• Only use the product for the specified purpose of use.
• Incorrect use of the product can lead to a risk of fire, explosion or other hazard and can result in a voided warranty.
• Do not use or leave the product in dusty or otherwise contaminated environments.
• Do not expose the product to extreme temperatures, direct sunlight, heat sources, etc. Avoid contact with open flame. Do not place naked flame sources, such as lighted candles, on the product. Keep the product in a dry environment.
• Do not expose the product to dripping or splashing water. Do not place water containers, such as vases, on the product.
• Do not place heavy objects on the product. Do not subject it to shocks, falls or other me-chanical damage.
• Do not disassemble the product. Attempting to modify the power bank may damage the product and result in a serious injury.
• Do not use the product if it is damaged or emits a suspicious odour.
• Use only a soft, clean, dry cloth to clean the surface. Do not use harsh or chemical cleaners, petrol, thinners, etc.

WARRANTY & SUPPORT

Your new product is protected by our 24-month warranty, or extended warranty (if stated), which you can apply at any of our points of sale. For inquiries, you can use the contact form or one of our international call centres.
United Kingdom: +44 (0)203 514 4411

This product meets all of the related basic EU regulation requirements. The EU dec-laration of conformity is available on www.alzashop.com/DoC.
This product sold in the European Union meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).
The use of the WEEE Symbol indicates that this product should not be treated as household waste. By ensuring this product is disposed of correctly, you will help pro-tect the environment. For more detailed in-formation about the recycling of this product, please contact your local authority, your household waste disposal service provider, or the shop where you purchased the item. Alza.cz, a. s. hereby declares that the radio device APW-FMTV2 is in compliance with Directive 2014/53/EU.
www.alzapower.com
Co. Reg. No. 27082440
Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic © 2022 Alza.cz a.s. All Rights Reserved.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• AlzaPower | Alza.cz
• Alza.cz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>