Dockteck RJ45 Type-c Hub Hdmi Gigabit Ethernet Adapter User Manual
- June 10, 2024
- DOCKTECK
Table of Contents
Dockteck RJ45 Type-c Hub Hdmi Gigabit Ethernet Adapter User Manual
DEAR CUSTOMER
Thank you for purchasing this product. For optimum per form anceandsafety, please read these instructions carefully before connecting, operating or using this product. Please keep this manual for future reference.
INTRODUCTION
This is a Type-C 4-in-1 hub with HDMI, USB-A，RJ45 and Type- Cremate port, providing an ideal solution for extending the port of Type-C/Thunderbolt 3 host (PC/Laptop/Mobile phone, etc.),especially for those host with a single Type-C port. This hub adopts thelatestDP1.4 Alt mode supported IC, enabling to output HDMI videowithmax 4k/60Hz and at the meanwhile transfer USB 3.1 data withmax5Gbps. RJ45 helps host to get access to super fast Ethernet network. Besides, the Type-C female supports PD 3.0 with max 100WPDCharging when connecting a PD Adapter and supports max5Gbpsdata transmission when connecting a Type-C device. It canworkonall Type-C and ThunderboltTM3 host that supports DPA ltmode(including DP1.2 and DP1.4 Alt mode).When workingon Thunderbolt TM 3 host, this product transmits DP signal.
FEATURES
Upstream:
- Type-C Malex1(Connect to host)
- Support DP1.4 Alt mode, with bandwidth max 2 lanes 16.2Gbps(8.1Gbps per lane),downward compatible with DP1.2 Alt mode
Note: To get max bandwidth, the host should support DP1.4 Alt modewith DSC format
Downstream:
- HDMI
- Support HDMI max 4K/60Hz，4：4：4，8bit with 18Gbps Bandwidth Support 6/8/10/12 bit color depth output
- Support output pixel format RGB4:4:4/YCbCr4:4:4/YCbCr4:2:2 Support HDCP 2.2&HDCP1.4
- Support HDR
Note: When connecting a DP1.4 Alt mode supported host, the max resolution of
HDMI is 4k/60Hz; When connecting a DP1.2 Alt mode supported host, the maxresolution of HDMI is 4k/30Hz due to bandwidth limitation
- USB-A 3.0X1
- Support BC 1.2 with max 7.5W([email protected]) downstream charging Max 5Gbps bandwidth
- RJ45X1
- 10M/100M/1000M
- Type-C Femalex1(for PD Charging & Data)
When connecting a PD Adapter:
- Support PD Charging 100W (20V/5A)
- Support Fast Role Swap of PD 3.0, the connected device will not get disconnected while plugging in and out PD Adapter
- 7.5W is dedicated to the functioning of this product, the rest power(max 92.5W) will be passed to charge for the host
When connecting a Type-C device:
- Max 5Gbps data transfer
- Max 7.5w(5V/1.5A) downstream charging
- Share max 7.5W downstream charging with USB-A port
SPECIFICATIONS
Input/Output Connector
Input| Type-C Male x1
Output| HDMI Female x1 USB-A Femalex1 RJ45X1 Type-C femalex1（PD&Data)
Warranty
Limited Warranty| 1 Year
Environmental
Operating Temperature| 0℃ to +45℃
Operating Humidity| 10% to 90 %RH (no condensation)
Storage Temperature| -10℃ to +70℃
Storage Humidity| 10% to 90 %RH (no condensation)
Power Supply
USB-C PD Charging Port| 100W(20V/5A)
Regulatory Approvals
Certifications| FCC,CE
Accessory Adapter
User Manual| English Version
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging an drake sure the following items are contained in the shipping carton:
- Main unit x1
- User Manual x1
CONNECTION DIAGRAM
