iiyama MD_CAR1021-B1 Single Column Electric Car Lift Stand Instruction Manual
- June 10, 2024
- iiyama
Table of Contents
MD_CAR1021-B1 Single Column Electric Car Lift Stand
Instruction Manual
MD CAR1021-B1
SINGLE COLUMN ELECTRIC CAR LIFT STAND
MD_CAR1021-B1 Single Column Electric Car Lift Stand
Safety information
For using this product properly and safely, please follow the contents of the
Installation and Operation Manual to install. It is suggested that this
Electric Stand applies to the 55-86 inch interactive Large Format Display. Use
with other equipment may result in instability causing injury.
This stand can carry a maximum weight of 100KG.
Important safety information for both installer and user Installer:
Before starting the installation, read the safety information and the rest of
this product manual carefully. Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury, damage to
equipment!
User:
Please carefully to read the safety information and user manual (if included)
before using the product to ensure a failure-free working unit and avoid
accidents.
Electrical Safety
Connect the unit to a properly grounded outlet only. Make sure the unit can be
immediately separated from the power outlet.
Only use the unit in dry rooms, protect it from water and other liquids. Clean
the unit with dry cloth only.
Do not open lift unit. RISK OF ELECTRIC SHOCK. There are no serviceable parts
inside. In case of dysfunction, unplug the unit from power outlet and contact
an authorised technical service person.
Do not overuse the cable(s) or damage it in any other ways. Replace damaged
cable(s) immediately with new identical cable(s).
The socket-outlet shall be easily accessible when a power cable used as
disconnect device.
Disconnect power cable from power outlet before moving the product.
The unit does not have dripping or splashing protection. Do not place any
liquid objects on or spray the unit.
To reduce the risk of electric shock, always unplug the power from the power
outlet before cleaning.
Mechanical safety
Always keep product’s moving path free from obstacles.
Before moving the unit up or down, assure at least 20 cm/ 7.9 inch safety
distance from any part of the unit to any other elements in order to avoid
shear traps or squeezing points.
In case of accident, please stop the operating immediately.
Only operate the unit with wheels on plane and stable floors. Move the unit on
plane floors only.
Risk of tilting when overrunning door sills, uneven floor and similar.
Severe risk of injury when unit tips over. Always move the product with the
display in the lowest position.
Do not push the Electric Stand from front or back of lift.
Do not move the Electric Stand by pushing on Display.
The bottom of the display height is not over 0.85m from the ground after
installed.
Hazardous moving parts keep fingers and other body parts away.
Exceeding the weight capacity can result in serious personal injury or damage
to equipment.
It is the installer’s responsibility to make sure the total weight include
accessories does not exceed the maximum load of 220 lbs / 100 kg. Use with
heavier screens may result in instability causing tip over and resulting in
death or serious injury. The height adjustable feature will not function
properly if the total weight exceeds the given maximum load. The installation,
maintenance and un-installation of the product should be handled by trained
professional and skilled personnel.
The intended use of the product:
The product is intended to be used for the mounting and height adjustment of
passive or interactive larger format display. The product is intended for in-
door usage in classrooms, offices or meeting rooms at temperature between 0 to
40 °C. Please make sure indoor environment is dry and cool. Normal operating
humidity is 10%~90%RH. Do not use this product in out-door environment.
The product is intended to use by adults; children under the age of 16 should
only use the product under adult supervision. Duty cycle ：6 min on/ 30 min
off. The Electric Stand motors are intended for intermittent use, continuous
or extended use (more than 6 minutes) will cause over heating and safety
system will switch the motors off, if motors overheating occurred, please cool
down the motors at least 30 minutes before re-operating. The system will
automatically switch back to normal when the motors have cooled down.
Anti-collision function: the product will be stopped and moved up 50mm
automatically when detected obstacle/jitter during descending operation, in
opposite of the ascending operation, the product will be stopped automatically
when detected obstacle/jitter.
Quick Start Guide
Control Mode
| No. | Items | Function description |
|---|---|---|
| 1 | UP | Control the ascending |
| 2 | Down | Control the descending |
| 3 | USB Interface | Connect interactive Large Format Display with USB cable |
| 4 | Control Pad Interface | Connect with the Control Pad (9) |
| 5 | Indicator Light | Standby: red; Work: blue. |
NOTE
After power on the Electric Stand, wait till a “beep” of the buzzer heard before use.
Control Pad
Connect the Control Pad
There are two buttons on the Control Pad, corresponding to the UP Key and DOWN key of the Control Panel.
The software of the interactive Large Format Display
Please check niyama website; http://www.iiyama.com for compatible
interactive Large Format Display
Step1: Ensure that the interactive Large Format Display is connected with
the Electric Stand by USB Cable(11).
Step2: Turn on the interactive Large Format Display, the sidebar of the
interactive Large Format Display will display the control button of the
Electric Stand.
Motorized stand
| No. | Items | Function description |
|---|---|---|
| 1 | UP | Control the ascending |
| 2 | Down | Control the descending |
| 3 | Lift memory (1) | Long press the button till the display shows ”Save the |
first height”. Next time you click the button, the height of the stand will
be automatically adjusted to the memorized first height
4| Lift memory (2)| Long press the button till the display shows ”Save the
second height”. Next time you click the button, the height of the stand will
be automatically adjusted to the memorized second height.