KYOCERA Cloud Connect Software Installation Guide

KYOCERA Cloud Connect Software

Legal notes

Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable for any problems arising from the use of this product, regardless of the information herein. © 2022 KYOCERA Document Solutions Inc.

Regarding trademarks

Microsoft®, Windows®, and Active Directory® are registered trademarks of Microsoft Corporation in the U.S. and/or other countries. All other brand and product names herein are registered trademarks or trademarks of their respective companies.

Product Overview

KYOCERA Cloud Connect is a licensed HyPAS application that is installed and accessed from the operation panel of a HyPAS-enabled printer. With this application, you can link one or more accounts of select cloud services and do any of the following:

• Print files currently stored in your account
• Scan and upload files to your account The following cloud services are supported:
• Google Drive

You can only access files that have been uploaded through KYOCERA Cloud Connect version 10.

• Evernote
• OneDrive for Business

Documentation

This guide helps you install KYOCERA Cloud Connect on a supported printer. This guide is intended for system administrators.
For more information about using the different features of the application, see KYOCERA Cloud Connect User Guide.

Conventions
The following conventions may be used in this guide:

• Bold text is used for menu items and buttons
• Screen, text box, and drop-down menu titles are spelled and punctuated exactly as they are displayed on the screen
• Italics are used for document titles
• Text or commands that a user enters are displayed as text in a different font or in a text box as shown in these examples:
  1. On the command line, enter net stop program
  2. Create a batch file that includes these commands: net stop program gbak -rep -user PROGRAMLOG.FBK
• Icons are used to draw your attention to certain pieces of information. Examples:

This indicates information that is useful to know. This indicates important information that you should know, including such things as data loss if the procedure is not done properly.

System requirements

Refer to the Release Notes or ReadMe that accompany this product.

Installing the application

To ensure proper setup and to prevent the printer from malfunctioning, installation of the application must be done by qualified service personnel or system administrator.

Before you begin, make sure that:

• Your HyPAS-enabled printer:
• Has sufficient storage for installing the application. For some printers, you can install an optional hard disk, SSD, or SD card.
• Is turned on and connected to the internet. If applicable, make sure that your printer proxy settings are correct.
• You have administrator access to your printer.
• The correct application package (*.pkg) is stored in the root directory of an empty USB drive.
• You have a valid license key. Menus and options may vary depending on your printer.

1. Insert the USB drive containing the application package into the USB port of your printer.
2. In the printer operation panel, go to Home > System Menu > Add/Delete Application.
3. In Application, select Add/Delete Application. If necessary, enter your administrator credentials.
4. Select Add.
5. elect the correct application package, then select Install > Yes. After the installation finishes, the application is listed on the screen, ready for activation.
6. Select the application from the list, then select Activate.
7. Enter a valid license key, then select Official > Start.
8. After the activation finishes, go to Home. You are now ready to configure and use the application.

f a newer version is available, you may update the application that is installed in your printer. Follow the same steps in installing the application except for activation.

Accessing and configuring the application

The application can be accessed from the home screen of your printer operation panel.

• If the application is not available in the home screen, go to your printer system settings then make sure that the application is listed and activated.
• The features in this application require internet access. Before using the application, if applicable, make sure that your printer proxy settings are correct.
  1. From the printer operation panel, select KYOCERA Cloud Connect. If this is your first time to open the application or if you just updated the application, read and accept the terms of service.
  2. Select Settings, then select any of the following:

You must have administrator access to your printer.

To manage settings remotely, access HyPAS Device Online by entering https://123.123.123.123:8083/, where 123.123.123.123 is the IP address of your printer with KYOCERA Cloud Connect installed. On the application home screen, you can access the following supported cloud services:

• Google Drive
• Evernote
• OneDrive for Business

In any part of KYOCERA Cloud Connect, you can select any of the following:

Home

Return to the application home screen.

Logout

Log out of the current user account and return to the cloud service login page.

Exit
Quit the application and return to the home screen of your printer operation panel.

Registering root certificates

After installation, KYOCERA Cloud Connect may not be able to access some supported cloud services because of unregistered or missing root certificates. Before using the application, make sure to review or register the correct root certificate for your cloud services.

1. From a web browser, access HyPAS Device Online by entering https://123.123.123.123:8083/, where 123.123.123.123 is the IP address of your printer with KYOCERA Cloud Connect installed.

   • Make sure that you are accessing HyPAS Device Online in thesame network as your printer.
   • If a website security certificate problem is displayed in your browser, select the option to continue to the website.

2. Log in using your administrator credentials.

3. Go to Security > Certificate > Server Certificate, then make sure that
   your cloud service root certificates are listed in Certificate Manager. If the
   list is empty, then manually register the correct root certificate:
   You can get your cloud service root certificates from:

   • The compressed certificates file that came with the application package used to install KYOCERA Cloud Connect. Before proceeding, extract the contents of the compressed file.
   • The cloud service website. In a web browser, view then export the certificate.

• Select Import, then browse for the extracted root certificates.
• Select the correct root certificate, then select Import.
• After the import finishes, log out of HyPAS Device Online.
• Turn off then restart your printer.
• After your printer restarts, repeat the steps to access HyPAS Device Online and verify that your cloud service root certificates are listed in Certificate Manager.

For the KYOCERA contact in your region, see Sales Sites sections here: ttps://www.kyoceradocumentsolutions.com/company/directory.html

• CCIGKDEN200.2022.07

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>