HORAGE CMK1 Autark 10 Years Watch User Manual
- June 10, 2024
- HORAGE
Table of Contents
AUTARK 10 YEARS
USER
MANUAL
Dear Customer,
Congratulation on your new AUTAK 10 YEARS watch, we hope you enjoy using it.
USEFUL INFORMATION
Attention: To avoid movement defects, generally, hands should be moved
clockwise while setting the time.
In order to guarantee the reliability of your HORAGE watch we recommend you to
follow some directions:
- Protect your watch from shocks and magnetic fields.
- The fine mechanism of your HORAGE watch should be examined and main tainted from time to time.
- We recommend a revision and examination regarding the water resistance every three years (if often used in water, every two years). This should be done by an authorized HORAGE dealer.
- Your watch will appreciate it and an impeccable function will be guaranteed.
- Only diving watches are suited for swimming and diving. Your watch has been tested regarding the pressure indicated at the bottom of the case.
- Before use in water it needs to be checked whether the crown is pushed to the winding up position in order to guarantee the water resistance.
- The indicated water resistance is only valid for newly manufactured watches. The water resist- acne can be affected with time by shocks, chemical reactions with gasoline, adhesives, paint, cleaning spray etc. and by frequent turning of the crown.
- The watch automatically winds up by the movement of the wearer.
- To put the watch into operation it needs to be wound up by 10 or 15 revolutions via the crown.
OVERVIEW
- Hour Hand
- Minute Hand
- Small Seconds Hand
- Power Reserve Indicator
- Date Window
- Screw Down Crown
Power setting.
- Crown at 3 o’clock touching the case, the crown can be wound forward to gain power.
Date setting.
- Pull the crown at 3 o’clock (first notch): wind the crown forward to set the date.
Time setting. - Pull the crown at 3 o’clock (second notch): wind the crown backward to set the time; the watch will start as soon as the crown is pushed back in.
MAINTENANCE
Service can be performed by every experienced watch maker.
Make sure that the seals are exchanged to keep water resistance intact as well
as lubrication is applied during this service.
It’s not a must but your watch will like it and thank you with good precision
and extended lifetime.
HORAGE SA Fuchsenried 10
2504 Biel/Bienne Switzerland
www.horage.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>