OMNIUM GEN 2 40MM Horage Swiss Watches User Manual
- June 10, 2024
- HORAGE
Table of Contents
OMNIUM GEN 2 40MM Horage Swiss Watches
Congratulations on your new OMNIUM GEN 2 40mm watch! We hope you enjoy using it. Below is some useful information and directions to ensure the reliability and longevity of your watch.
Overview
The OMNIUM GEN 2 40MM watch features the following:
- Hour Hand
- Minute Hand
- Central Seconds Hand
- Power Reserve Indicator
- Screw Down Crown
Useful Information
To avoid movement defects, it is recommended to move the hands clockwise while setting the time.
Maintenance
Service can be performed by any experienced watchmaker. It is recommended that the seals are exchanged to maintain water resistance and lubrication are applied during this service. This will help ensure good precision and an extended lifetime for your watch.
Product Usage Instructions
Power Setting
Step 1: Ensure the crown at 3 o’clock is touching the case.
Step 2: Wind the crown forward to gain power.
Date Setting
Step 1 : Pull the crown at 3 o’clock to the first notch.
Step 2: Wind the crown forward to set the date.
Time Setting
- Step 1: Pull the crown at 3 o’clock to the second notch.
- Step 2: Wind the crown backward to set the time.
- Step 3: Push the crown back in and the watch will start.
- For more information, visit www.horage.com.
Dear Customer,
Congratulation on your new OMNIUM GEN 2 40mm watch, We hope you enjoy using it.
USEFUL INFORMATION
- Attention: To avoid movement defects, generally, hands should be moved clockwise while setting the time.
- In order to guarantee the reliability of your HORAGE watch we recommend you follow some directions:
- Protect your watch from shocks and magnetic fields.
- The fine mechanism of your HORAGE watch should be examined and maintained from time to time.
- We recommend a revision and examination regarding the water resistance every three years (if often used in water, every two years). This should be done by an authorized HORAGE dealer.
- Your watch will appreciate it and an impeccable function will be guaranteed.
- Only diving watches are suited for swimming and diving. Your watch has been tested regarding the pressure indicated at the bottom of the case.
- Before use in water, it needs to be checked whether the crown is pushed to the winding-up position in order to guarantee water resistance.
- The indicated water resistance is only valid for newly manufactured watches. The water resistance can be affected with time by shocks, chemical reactions with gasoline, adhesives, paint, cleaning spray, etc., and by frequent turning of the crown.
- The watch automatically winds up with the movement of the wearer.
- To put the watch into operation it needs to be wound up by 10 or 15 revolutions via the crown.
OMNIUM GEN 2 40MM
OVERVIEW
- Hour Hand
- Minute Hand
- Central Seconds Hand
- Power Reserve Indicator
- Screw down crown
Power setting.
Crown at 3 o’clock touching the case, the crown can be wound forward to gain power.
Date setting.
Pull the crown at 3 o’clock (first notch): wind the crown forward to set the date.
Time setting.
Pull the crown at 3 o’clock (second notch): wind the crown backward to set the time; the watch will start as soon as the crown is pushed back in.
MAINTENANCE
Service can be performed by every experienced watchmaker.
- Make sure that the seals are exchanged to keep water resistance intact as well as lubrication is applied during this service.
- It’s not a must but, your watch will like it and thank you with good precision and extended lifetime.
- HORAGE SA Fuchsenried 10 2504 Biel/Bienne Switzerland www.horage.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>