HORAGE 33MM Solar Wind Watch User Manual

: June 10, 2024
: HORAGE

Table of Contents

HORAGE 33MM Solar Wind Watch
Product Information
Product Usage Instructions
USEFUL INFORMATION
OVERVIEW
MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HORAGE 33MM Solar Wind Watch

Product Information

The SOLAR WIND 33MM watch is a high-quality timepiece manufactured by HORAGE SA. It features a reliable Movement-CMK1 mechanism that ensures accurate timekeeping. The watch has a screw-down crown and is water-resistant, making it suitable for everyday wear and outdoor activities. The watch is powered by a manual winding mechanism that can be charged by exposing the watch to sunlight.

Product Usage Instructions

Setting the Time:

Ensure the crown at 3 o’clock is touching the case.
Wind the crown clockwise to gain power.
Pull the crown at 3 o’clock to the second notch.
Wind the crown counter-clockwise to set the time.
Push the crown back in to start the watch.

USEFUL INFORMATION

Attention: To avoid movement defects, generally, hands should be moved clockwise while setting the time. In order to guarantee the reliability of your HORAGE watch we recommend you to follow some directions:

Protect your watch from shocks and magnetic fields.
The fine mechanism of your HORAGE watch should be examined and maintained from time to time.
We recommend a revision and examination regarding the water resistance every three years (if often used in water, every two years). This should be done by an authorized HORAGE dealer.
Your watch will appreciate it and an impeccable function will be guaranteed.
Only diving watches are suited for swimming and diving. Your watch has been tested regarding the pressure indicated at the bottom of the case.
Before use in water, it needs to be checked whether the crown is pushed to the winding-up position in order to guarantee water resistance.
The indicated water resistance is only valid for newly manufactured watches. The water resistance can be affected with time by shocks, chemical reactions with gasoline, adhesives, paint, cleaning spray etc. and by frequent turning of the crown.
The watch automatically winds up with the movement of the wearer.
To put the watch into operation it needs to be wound up by 10 or 15 revolutions via the crown.

OVERVIEW

Hour Hand
Minute Hand
Seconds Hand
Screw Down Crown

Power setting: Crown at 3 o’clock touching the case, the crown can be wound forward to gain power.

Time setting: Pull the crown at 3 o’clock (second notch) and wind the crown backwards to set the time; the watch will start as soon as the crown is pushed back in.

MAINTENANCE

HORAGE-33MM-Solar-Wind-Watch-fig-4

Service can be performed by every experienced watchmaker.
Make sure that the seals are exchanged to keep water resistance intact as well as lubrication is applied during this service. It’s not a must, but your watch will like it and thank you with good precision and an extended lifetime. The SOLAR WIND 33MM watch requires periodic maintenance to ensure its water resistance and accuracy. The service should be performed by an experienced watchmaker who will exchange the seals and lubricate the watch during service. This will help extend the lifetime of the watch and maintain its precision. For more information about the SOLAR WIND 33MM watch, please visit the HORAGE SA website at www.horage.com.