PUFFCO Peak Smart E-Rig Kit Instruction Manual
- August 29, 2024
- Puffco
Table of Contents
Peak Smart E-Rig Kit
“`html
Product Information
Specifications:
- Brand: Peak by Puffco Innovations
- Model: Smart E-Rig Kit
- Features: Real Time Temp Control, 3D Chamber, Joystick Cap
- Components: Peak 3D Chamber, Joystick Cap, Peak Glass 2.0, Peak
Base, Loading Tool, Cotton Swabs, USB-C Cable
Product Usage Instructions
Charging:
Fully charge the device before first use. The light band will
glow indicating the battery level:
- Green (Full)
- Orange (Half)
- Red (Low)
Glass Handling:
To remove glass, grasp the base and gently pull glass towards
you. To reattach, align inlet hole with chamber and gently press
glass into base. Avoid overfilling to prevent water in the lower
section.
Filling with Water:
Always remove the glass top before filling. Through the
mouthpiece, fill with water to just above the perc holes.
Power On/Off:
To turn the Peak on/off, press & hold the button for 3
seconds.
Heat Settings:
Single-click button to toggle through each heat setting:
- White (Peak)
- Red (High)
- Green (Med)
- Blue (Low)
Cleaning:
Clean the 3D Chamber after each use with a cotton swab. Wipe
gently in a circular motion while the chamber is warm. Clean the
glass components with isopropyl alcohol.
Frequently Asked Questions (FAQ)
How do I troubleshoot error codes on the Peak?
Error Codes:
-
No chamber (white white white white): Remove and reinsert the
chamber. -
Chamber error (red white red white): Remove and clean the
chamber before reinserting. -
Device overheating (red for 5 seconds): Allow the device to
cool down before further use.
Where can I find additional support and tips?
You can visit Puffco.com/support for how-to videos and helpful
tips on using your Peak device.
“`
PEAK
PUFFCO INNOVATIONS
PEAK INSTRUCTION MANUAL
WHAT’S INSIDE HOW TO USE HEAT SETTINGS CLEANING TROUBLESHOOTING TIPS & TRICKS
SUPPORT
[ 01 ] [ 02 – 04 ] [ 05 ] [ 06 ] [ 08 ] [ 09 ] [ 10 ]
Peak
Smart E-Rig Kit
What’s New?
3D Chamber
Joystick Cap
Real Time Temp Control
) ) ) )
What’s Inside
– Peak 3D Chamber – Joystick Cap – Peak Glass 2.0 – Peak Base
01 /10
– Loading Tool – Cotton Swabs – USB-C Cable
Peak
How To Use
Fully charge the device before first use. The light band will glow indicating
the battery level:
3x
Green (Full) Orange (Half) Red (Low)
To remove glass, grasp the base and gently pull glass towards you. To
reattach, align inlet hole with chamber and gently press glass into base.
X – Overfilling can result in water in lower section. Empty before usage.
02 /10
Always remove glass top before filling. Through the mouthpiece, fill with water to just above the perc holes.
Peak
How To Use
1x
To turn the Peak on/off, press & hold the button for 3 seconds.
Use the loading tool to place extract on the bottom surface of the 3D Chamber.
03 /10
Single-click button to toggle through each heat setting.
1x
White (Peak) Red (High) Green (Med) Blue (Low)
Peak
How To Use
2x
Double-click to initiate heat cycle,
press & hold to cancel. Pulsing light
indicates device is heating up.
2
Device will flash & vibrate twice
when ready. For best results, inhale
gently while rotating the Joystick.
04 /10
Clean 3D Chamber after each use with a cotton swab. Wipe gently in a circular motion while chamber is warm.
Peak
Heat Settings
Choose a Setting
Each heat setting offers a different experience. We suggest experimenting to
find which settings work best for you and your consumption preferences.
You can also experiment further with other interchangeable glass tops
available for the Peak.
Color Peak [Most Vapor] – 590°F Delivering the most vapor and strength with
less flavor. High [Strong Vapor] – 530°F Higher vapor production while
maintaining flavor quality.
Med [Balanced Flavor] – 510°F The best of both worlds. Balanced flavor and
vapor. Low [High Flavor] – 490°F Best for delicate extracts. Optimal flavor,
least vapor.
05 /10
Peak
Cleaning
3D Chamber Glass
1. Remove the Joystick with Jacket & Tether, then unscrew the 3D Chamber from
base.
2. Use a cotton swab to gently remove any residue with 90%+ isopropyl
alcohol.
3. Submerge the chamber in 90%+ isopropyl alcohol for 20 minutes. Air-dry
completely before reattaching. DO NOT rinse.
Allow chamber to cool completely before handling.
Isopropyl alcohol is highly flammable; allow chamber to air-dry completely
before reattaching.
1. Carefully remove glass from base.
2. Once removed, submerge glass in 90%+ isopropyl alcohol for 20 minutes.
3. After soaking, thoroughly rinse glass with water and let air-dry
completely before reattaching to base.
X – Avoid allowing water into lower section.
06 /10
Peak
Cleaning
Base
1. Remove glass and chamber from base.
2. Use a cotton swab soaked in 90%+ isopropyl alcohol to gently clean the
thread block and air path between the chamber and glass.
3. Allow to air-dry completely before reattaching components. DO NOT rinse or
submerge in liquid.
Do not allow water into the base at any time.
Visit Puffco.com/support for how-to videos and helpful tips.
07 /10
Peak
Troubleshooting
Error Codes No chamber (white white white white)
– Remove and reinsert chamber. Chamber error (red white red white)
– Remove and clean chamber before reinserting. Device overheating (red for 5
seconds)
– Allow device to cool before using. Low battery (red red red)
– Ensure device is fully charged before using.
General Warnings Do not overfill the chamber.
Do not blow or exhale hard into the glass. This will force water into the
base.
Do not store device with water in the glass.
Strong inhales may cause spillage and damage to your chamber.
Do not charge or operate in temperatures beyond 32°F – 100°F
Use only with the provided USB-C cable.
Keep away from moisture and high humidity.
Store in a cool dark place when not in use. Chamber becomes hot while in use;
use caution when handling.
08 /10
Peak
Tips & Tricks
Boost Mode Boost Mode increases the time and temperature of your hit. To
activate, double-click to initiate heat cycle, then double-click again once
desired temperature is reached. Boost Mode increases heat cycle duration by 15
seconds & temperature by 18ºF.
Intensity Mode Click 5 times to initiate a heat cycle with added intensity.
This mode is specially designed for dry dabs, no water.
Low Battery Battery status indicator light will turn red when there are
approximately 5 dabs remaining in the device.
NEED HELP?
CONTACT US!
Please do not return your Peak to the store.
Keep your proof of purchase.
09 /10
@Puffco
Peak
IEC Compliance
This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
This appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance.
WARNING: Use only an external supply with the following specifications: <5V >
<2A>The normal temperature range for charging the battery: 32 F 100 F
The battery type: Rechargeable Li-ion Battery
Dispose of batteries according to your local environmental laws and guidelines.
The lithium-ion battery in the device should be serviced or recycled by an authorized service provider and disposed of separately from household waste.
Do not handle a damaged or leaking battery. Do not let leaking battery fluid come in contact with your eyes, skin, or clothing.
Do not expose the device or battery to excessive temperatures.
Be aware of the risk of terminals of the battery-operated device or battery being short circuited by metal objects.
This appliance contains batteries that are non-replaceable. When the battery is at end of life, the appliance shall be properly disposed of.
10 /10
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>