HIS KB-DT5K-PM45 45 Degree Panel Mount Keyboard Instruction Manual
- June 10, 2024
- HIS
Table of Contents
HIS KB-DT5K-PM45 45 Degree Panel Mount Keyboard
Product Information
This product is a keyboard with a mounting bracket that can be installed on a panel. The keyboard requires 1/4-20 machine screws with sealing washers for installation. The mounting bracket should also have sealing washers or RTV between it and the panel. The necessary cables can be routed through the cable gland, which can be installed into the panel. The cable gland hole diameter should be 1.26 – 1.30 and the maximum panel thickness should be 0.394.
Product Usage Instructions
-
Install 1/4-20 machine screws with sealing washers from the underside of the keyboard in the four places.
-
Place sealing washers or RTV between the mounting bracket and panel.
-
Route the necessary cables through the cable gland.
-
Install the cable gland into the panel at a location of your choice.
Note that the screws, sealing washers, and RTV are not provided with the
keyboard and must be purchased separately. Additionally, ensure that the cable
gland hole diameter is between 1.26 – 1.30 and the panel thickness does not
exceed 0.394.
99040A
December 20, 2022
www.HopeIndustrial.com
International: +1 678-762-9790
UK: +44 (0) 20 7193 2618
Copyright © 2023 Hope Industrial Systems, Inc.