WiZ 9290032636 Indoor Camera User Manual
- June 10, 2024
- wiz
Table of Contents
WiZ 9290032636 Indoor Camera
WHAT IN BOX
TOOLS
INSTALLATION
Box Content
Camera, 98.4-inch cable, Mounting screw pack, User manual.
Product introduction
- Lens
- Microphone
- Light sensor
- LED status
- MicroSD card slot
- Speaker
- Reset button
- USB power input
Set up
- Download “WiZ Connected” дрр
- Install the camera
Safety instruction
- This device is for indoor use only.
- The product power rating is 5V 1A, we recommend to use a compatible adaptor for the product to operate correctly.
- Please clean the lens gently with a cotton cloth and avoid touching the lens with hands directly to ensure clear view.
- Please clean the dust on the microphone & speaker to ensure 2-way audio quality.
- Do not rotate the camera with a strong force to avoid any damage.
- To prevent early failure, the product should be installed in operating environment ranging from 32 °F / 0 °C to 104 °F / +40 °C.
- This device does not provide third-party monitoring or emergency response. It is the user’s responsibility to determine the appropriate response.
- This device is limited to a user’s own, private residential use.
- The user is responsible to comply with privacy and other applicable laws.
- For optimal use, please ensure the field of vision of the camera is not ops trusted in any way.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with ISED Canada’s license-exempt RSS(s). This device complies with part 15 of
re-rec Rules. operation is subject to me following two conditions: anThis
device may not cause harmful interference, and (2) this device must accept any
interterence received, including interterence that may cause undesired
operation,
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. This equipment does cause
harmoninterference to radio or television reception, which can be determined
by turning the equipment off and on. the user is encouraged to try to correct
the interference ov one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- connect the equipment to an outlet on a circuit citterns from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
changes or modifications not expressive approved oy the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with FCC / ISED RSS RF exposure limits set forth for an
uncontrolled environment. This device should be installed and operated with a
minimum distance of 20cm (8 inches) between the device and the user body, Wi-
Fi, the Wi-Fi CERTIFIED logo are registered trademarks of Wi-Fi Alliance. Wi-
Fi CERTIFIED™’, WPA2, and WPA3 are trademarks of Wi-Fi
Alliance.
3241 658 33231 © 2022 Signify Holding
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>