ACID Kiox 300 Mount for Handlebar Instruction Manual

June 10, 2024
ACID

ACID Kiox 300 Mount for Handlebar

ACID-Kiox-300-Mount-for-Handlebar-product

Product Information

The product is a vehicle accessory manufactured by Pending System GmbH & Co. KG. The accompanying user manual provides important information on the assembly, initial operation, and maintenance of the product. The manual contains instructions on safety precautions and usage guidelines to ensure the proper functioning of the product.

Product Usage Instructions

Before assembling or using the product, read all enclosed instructions carefully, especially the general safety instructions. Non-observance of this manual may result in serious injury or damage to the product itself and your vehicle. Keep the enclosed instructions close at hand for further use. If you pass on the product or the vehicle equipped with the product to a third party, always include all accompanying instructions.

Use a torque wrench and follow the torque values indicated in the symbol. Drill a hole at the marked position using the drill diameter indicated in the symbol. Observe indication sound during assembly.

For safety during assembly, do not leave the product unattended. For maintenance, prevent malfunctions due to excessive wear, material fatigue, or loose screw connections. If you have any issues with the product, please present the purchase receipt and inspection reports to expedite your complaint processing.

For proper disposal, dispose of the packaging in a sorted manner. Place cardboard and paper in the recycling bin and place films and plastic parts in the recycling collection. If additional documentation is required for products delivered outside Europe, please contact the manufacturer/importer. For any further queries or support, visit www.cube.eu or contact Pending System GmbH & Co. KG at +49 (0)9231 97 007 80.

GENERAL

READ AND KEEP THE MANUAL
This and other accompanying instructions contain important information on the assembly, initial operation, and maintenance of the product.

Read all enclosed instructions carefully before assembling or using the product, especially the general safety instructions. Non-observance of this manual may result in serious injury or damage to the product itself and your vehicle. Keep the enclosed instructions close to hand for further use. If you pass on the product or the vehicle equipped with the product to a third party, always include all accompanying instructions. We at CUBE strongly recommend that you have this product assembled by your dealer. The enclosed instructions are subject to European legislation. If the product or vehicle is delivered outside Europe, the manufacturer/importer may have to provide additional instructions.

EXPLANATION OF SYMBOLS
The following symbols and signal words are used in the enclosed instructions, on the product or on the packaging.

  • WARNING!
    A medium risk of hazard that may result in death or serious injury if not avoided.

  • CAUTION!
    A low risk of hazard may result in moderate or minor injury if not avoided.

NOTICE!

  • Warning of possible damage to property.
  • Useful additional information for assembly or operation.
  • Read and observe the enclosed instructions.
  • Reference to further documentation – See instructions (Doc. – Number)
  • Use a torque wrench. Use the torque values indicated in the symbol.
  • Drill a hole at the marked position. Use the drill diameter indicated in the symbol.
  • Observe indication sound.
  • Trim with suitable tool.

SAFETY INSTRUCTIONS FOR ACCESSORIES

WARNING!

Risk of accident and injury!
Read all safety notes and instructions. Failure to observe the safety instructions and instructions can cause accidents, serious injury and damage.

Safety of children
If children play with the packaging or small parts, they may swallow them and suffocate or injure themselves.

  • Keep small parts away from children.
  • Do not let children play with the packaging or product.
  • Do not leave the product or vehicle unattended during assembly.

Safety instructions for assembly

  • Before assembly, check the scope of delivery of the product for completeness.
  • Before assembly, check all components of the product and the vehicle for damage, sharp edges or burrs.
  • If the scope of delivery for the product is not complete or if you notice any damage, sharp edges or burrs on the product, components or vehicle, do not use it.
  • Have the product and the vehicle checked by your dealer.
  • Use only parts and accessories intended for the product. Components from other manufacturers may affect optimal function.
  • If you intend to combine this product with vehicles of other manufacturers, be sure to check their specifications and check dimensional accuracy and compatibility according to the instructions in the enclosed manuals and the owner‘s manual of your vehicle.
  • Screw connections must be tightened correctly with a torque wrench and with correct torque values.
  • If you are not experienced in using a torque wrench or do not have a suitable torque wrench, have loose screw connections checked by your dealer.
  • Note special torques for components made of aluminum or carbon fiber-reinforced polymer. Please also read and follow the operating instructions of your vehicle.

Safety Instructions for Operation
Please note that accessories can have a significant influence on the characteristics of the vehicle.

  • If you are not absolutely sure or if you have questions, please contact your dealer.
  • The range of use of the bike always changes to use category 2 (asphalt roads, bike paths, forest roads, and dirt roads) when using this product.
  • The enclosed instructions cannot cover every possible combination of the product with all vehicle models.

Safety instructions for maintenance
Prevent malfunctions due to excessive wear, material fatigue or loose screw connections:

  • Check the product and your vehicle regularly.
  • Do not use the product and your vehicle if you notice excessive wear or loose screw connections.
  • Do not use the vehicle if you notice cracks, deformation or color changes.
  • Have the vehicle inspected immediately by your dealer if you notice excessive wear, loose screw connections, deformation, cracks or color changes.

Kiox 300 Halterung für Lenker mit Ø 31.8 / 35 mm

INTENDED USE
This product is designed to hold a Bosch Kiox 300 and is compatible with handlebars that have a diameter of 31.8 mm or 35 mm. The product is not designed to be used with other handlebars.

Specifications

  • Model name: Halterung Kiox 300
  • Aufnahme: Lenker
  • Material: Kunststoff
  • Gewicht: 30g
  • Abmessungen (LxBxH): 110 x 58 x 40 mm
  • Aufnahme: Bosch Kiox 300

Equipment delivered

ACID-Kiox-300-Mount-for-Handlebar-fig- \(1\)

  1. Handlebar mount: x 1
  2. Kiox mount: x 1
  3. Silicone pad Ø 31,8: x 2
  4. M4 x 14 mm screw: x 1
  5. M4 x 10 mm screws: x 1
  6. M3 x 10 mm screw: x 2

Mounting for KIOX 300

ACID-Kiox-300-Mount-for-Handlebar-fig- \(2\) ACID-
Kiox-300-Mount-for-Handlebar-fig- \(3\) ACID-
Kiox-300-Mount-for-Handlebar-fig- \(4\) ACID-
Kiox-300-Mount-for-Handlebar-fig- \(5\) ACID-
Kiox-300-Mount-for-Handlebar-fig- \(6\) ACID-
Kiox-300-Mount-for-Handlebar-fig- \(7\)

More extensive information and the latest manual you will find at the following website address: ACID-Kiox-300-Mount-for-Handlebar-fig-
\(8\)

CLEANING AND CARE

NOTICE!

Risk of damage!
Improper handling of cleaning agents can cause damage to the product.

  • Do not use aggressive cleaning agents, brushes with metal or nylon bristles or sharp or metallic cleaning objects such as knives, hard spatulas and the like. These can damage the surfaces and the product.

Clean the product regularly with water (add a mild detergent if necessary) and a soft cloth.

STORAGE
All parts must be completely dry before storage.

  • Always store the product in a dry place.
  • Protect the product from direct sunlight.

DISPOSAL

Dispose of the packaging according to its type. Add cardboard and cartons to your waste paper collection, and films and plastic parts to your recyclables collection. Dispose of the product in accordance with the laws and regulations valid in your country.

LIABILITY FOR MATERIAL DEFECTS

If there are any defects, please contact the dealer from whom you purchased the product. In order to ensure that your complaint is processed smoothly, it is necessary for you to present proof of purchase and proof of inspection. Please keep them in a safe place.

To ensure a long service life and durability of your product or your vehicle, you may only use it in accordance with its intended purpose. It is essential that you observe the information in the operating instructions of your vehicle. Furthermore, the installation instructions (especially torques for screws) and the prescribed maintenance intervals must be observed.

OTHER INFORMATION

Please visit us occasionally on our website at www.CUBE.eu. There you will find news, information, and the latest versions of our manuals as well as the addresses of our specialist dealers.

Pending System GmbH & Co. KG
Ludwig-Hüttner-Str. 5-7 D-95679 Waldershof
+49 (0)9231 97 007 80
www.cube.eu.

PENDING SYSTEM GMBH & CO. KG
Ludwig-Hüttner-Str. 5-7 D-95679 Waldershof.

www.cube.eu/service/manuals/.ACID-
Kiox-300-Mount-for-Handlebar-fig- \(9\)

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals