ACID Top Tube Bag CMPT 1 Bike Instruction Manual
- June 10, 2024
- ACID
Table of Contents
Top Tube Bag CMPT 1 Bike
Instruction Manual
Top Tube Bag CMPT 1 Bike
READ AND KEEP THE MANUAL
This and other accompanying instructions contain important information on the
assembly, initial operation, and maintenance of the product.
Read all enclosed instructions carefully before assembling or using the
product, especially the general safety instructions. Non-observance of this
manual may result in serious injury or damage to the product itself and your
vehicle. Keep the enclosed instructions close to hand for further use. If you
pass on the product or the vehicle quipped with the product to a third party,
always include all accompanying instructions.
We at CUBE strongly recommend that you have this product assembled by your
dealer.
The enclosed instructions are subject to European legislation. If the product
or vehicle is delivered out- side Europe, the manufacturer/importer may have
to provide additional instructions.
EXPLANATION OF SYMBOLS
The following symbols and signal words are used in the enclosed instructions,
on the product or on the packaging.
WARNING!
A medium risk of hazard which may result in death or serious injury if not
avoided.
CAUTION!
A low risk of hazard which may result in moderate or minor injury if not
avoided.
NOTICE!
Warning of possible damage to property.
Useful additional information for assembly or operation.
**** Read and observe the enclosed instructions.
Reference to further documentation – See instructions (Doc. – Number)
Use a torque wrench. Use the torque values indicated in the symbol.
SAFETY INSTRUCTIONS FOR ACCESSORIES
WARNING!
Risk of accident and injury!
Read all safety notes and instructions. Failure to observe the safety
instructions and instructions can cause accidents, serious injury and damage.
Safety of children
If children play with the packaging or small parts, they may swallow them and
suffocate or injure themselves.
» Keep small parts away from children.
» Do not let children play with the packaging or product.
» Do not leave the product or vehicle unattended during assembly.
Safety instructions for assembly
- Before assembly, check the scope of delivery of the product for completeness.
- Before assembly, check all components of the product and the vehicle for damage, sharp edges or burrs.
- If the scope of delivery for the product is not complete or if you notice any damage, sharp edges or burrs on the product, components or vehicle, do not use it.
- Have the product and the vehicle checked by your dealer.
- Use only parts and accessories intended for the product. Components from other manufacturers may affect optimal function.
- If you intend to combine this product with vehicles of other manufacturers, be sure to check their specifications and check dimensional accuracy and compatibility according to the instructions in the enclosed manuals and the owner‘s manual of your vehicle.
- Screw connections must be tightened correctly with a torque wrench and with correct torque values.
- If you are not experienced in using a torque wrench or do not have a suitable torque wrench, have loose screw connections checked by your dealer.
- Note special torques for components made of aluminum or carbon fiber reinforced polymer. Please also read and follow the operating instructions of your vehicle.
Safety Instructions for Operation
Please note that accessories can have a significant influence on the
characteristics of the vehicle.
- If you are not absolutely sure or if you have questions, please contact your dealer.
- The range of use of the bike always changes to use category 2 (asphalt road, bike paths, forest roads and dirt roads) when using this product.
- The enclosed instructions cannot cover every possible combination of the product with all vehicle models.
Safety instructions for maintenance
Prevent malfunctions due to excessive wear, material fatigue or loose screw connections:
- Check the product and your vehicle regularly.
- Do not use the product and your vehicle if you notice excessive wear or loose screw connections.
- Do not use the vehicle if you notice cracks, deformation or color changes.
- Have the vehicle inspected immediately by your dealer if you notice excessive wear, loose screw connections, deformation, cracks or color changes.
CLEANING AND CARE
NOTICE!
Risk of damage!
Improper handling of cleaning agents can cause damage to the product.
- Do not use aggressive cleaning agents, brushes with metal or nylon bristles or sharp or metallic cleaning objects such as knives, hard spatulas and the like. These can damage the surfaces and the product.
Clean the product regularly with water (add a mild detergent if necessary) and a soft cloth.
STORAGE
All parts must be completely dry before storage.
- Always store the product in a dry place.
- Protect the product from direct sunlight.
DISPOSAL
Dispose of the packaging according to its type. Add cardboard and cartons to
your waste paper collection, and films and plastic parts to your recyclables
collection.
Dispose of the product in accordance with the laws and regulations valid in
your country.
LIABILITY FOR MATERIAL DEFECTS
If there are any defects, please contact the dealer from whom you purchased
the product.
In order to ensure that your complaint is processed smoothly, it is necessary
for you to present proof of purchase and proof of inspection.
Please keep them in a safe place.
To ensure a long service life and durability of your product or your vehicle,
you may only use it in accordance with its intended purpose. It is essential
that you observe the information in the operating instructions of your
vehicle.
Furthermore, the installation instructions (especially torques for screws)
and the prescribed maintenance intervals must be observed.
OTHER INFORMATION
Please visit us occasionally on our website at
www.CUBE.eu. There you will find news, information and
the latest versions of our manuals as well as the addresses of our specialist
dealers.
Pending System GmbH & Co. KG
Ludwig-Hitter-Str. 5-7
D-95679 Waldershof
ASSEMBLY INSTRUCTION AND MANUAL
1 x 1 top tube bag
2 x 1 extension strap
3 x 1 rain cover
MOUNTING SYSTEM
| 
---|---
maximum payload 1,5 Kg| do not carry pets
ASSEMBLY INSTRUCTION AND MANUAL for
Top Tube Bag CMPT 1
PENDING SYSTEM GMBH & CO. KG
Ludwig-Witter-Str. 5-7
D-95679 Waldershof
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>