ACID Hybrid Isis-Gen 4 Crank Instruction Manual
- June 10, 2024
- ACID
Table of Contents
**ACID Hybrid Isis-Gen 4 Crank Instruction Manual
**
GENERAL
READ AND KEEP THE MANUAL
This and other accompanying instructions contain important information on the assembly, initial operation, and maintenance of the product.
Read all enclosed instructions carefully before assembling or using the product, especially the general safety instructions. Non-observance of this manual may result in serious injury or damage to the product itself and your vehicle. Keep the enclosed instructions close to hand for further use. If you pass on the product or the vehicle equipped with the product to a third party, always include all accompanying instructions.
We at CUBE strongly recommend that you have this product assembled by your dealer.
The enclosed instructions are subject to European legislation. If the product or vehicle is delivered outside Europe, the manufacturer/importer may have to provide additional instructions
EXPLANATION OF SYMBOLS
The following symbols and signal words are used in the enclosed instructions, on the product or on the packaging.
WARNING!
A medium risk of hazard which may result in death or serious injury if not
avoided.
CAUTION!
A low risk of hazard which may result in moderate or minor injury if not
avoided.
NOTICE!
Warning of possible damage to property.
Useful additional information for assembly or operation.
Read and observe the enclosed instructions.
Grease the marked spot with a suitable lubricant.
Use a torque wrench. Use the torque values indicated in the symbol.
SAFETY INSTRUCTIONS FOR ACCESSORIES
WARNING!
Risk of accident and injury!
Read all safety notes and instructions. Failure to observe the safety
instructions and instructions can cause accidents, serious injury and damage.
Safety of children
If children play with the packaging or small parts, they may swallow them and
suffocate or injure themselves.
- Keep small parts away from children.
- Do not let children play with the packaging or product.
- Do not leave the product or vehicle unattended during assembly.
Safety instructions for assembly
-
Before assembly, check the scope of delivery of the product for completeness.
-
BeIf a crank is already installed before installing the product, this
should be properly removed in accordance with the respective
instruction manual!fore assembly, check all components of the product and the vehicle for damage, sharp edges or burrs. -
If the scope of delivery for the product is not complete or if you notice any damage, sharp edges or burrs on the product, components or vehicle, do not use it.
-
Have the product and the vehicle checked by your dealer.
-
Use only parts and accessories intended for theproduct. Components from other manufacturers may affect optimal function.
-
If you intend to combine this product with vehicles of other manufacturers, be sure to check their specifications and check dimensional accuracy and compatibility according to the instructions in the enclosed manuals and the owner‘s manual of your vehicle.
-
Screw connections must be tightened correctly with a torque wrench and with correct torque values.
-
If you are not experienced in using a torque wrench or do not have a suitable torque wrench, have loose screw connections checked by your dealer.
-
Note special torques for components made of aluminum or carbon fiber reinforced polymer. Please also read and follow the operating instructions of your vehicle.
-
Before commissioning, make sure that the product does not collide with the bike frame or other components
Safety Instructions for Operation
Please note that accessories can have a significant influence on the
characteristics of the vehicle.
- If you are not absolutely sure or if you have questions, please contact your dealer.
- The enclosed instructions cannot cover every possib
- The product is designed for a maximum personal body weight of 125 kg and must not be subjected to excess loads.
- If you discover any irregularities while using the product, discontinue use and contact your specialist dealer immediately. Irregularities may include:
- Grinding and creaking noises
- Slackness in the motor mounting bracket and pedals
STORAGE
All parts must be completely dry before storage.
- Always store the product in a dry place.
- Protect the product from direct sunlight.
DISPOSAL
Dispose of the packaging according to its type. Add cardboard and cartons to your waste paper collection, and films and plastic parts to your recyclables collection.
Dispose of the product in accordance with the laws and regulations valid in your country.
LIABILITY FOR MATERIAL DEFECTS
If there are any defects, please contact the dealer from whom you purchased the product.
In order to ensure that your complaint is processed smoothly, it is necessary for you to present proof of purchase and proof of inspection.
Please keep them in a safe place.
To ensure a long service life and durability of your product or your vehicle, you may only use it in accordance with its intended purpose. It is essential that you observe the information in the operating instructions of your vehicle. Furthermore, the installation instructions (especially torques for screws) and the prescribed maintenance intervals must be observed.
OTHER INFORMATION
Please visit us occasionally on our website at www.CUBE.eu. There you will find news, information and the latest versions of our manuals as well as the addresses of our specialist dealers.
Pending System GmbH & Co. KG Ludwig-Hüttner-Str. 5-7 D-95679 Waldershof +49
(0)9231 97 007 80
www.cube.eu