BAY SPORTS Electric Pod Motor for Pedal Pro Fish 3.2M and 4M XL Installation Guide

BAY SPORTS Electric Pod Motor for Pedal Pro Fish

Product Information

Electric Pod Motor for Pedal Pro Fish 3.2M and 4M XL

The Electric Pod Motor is designed to be installed on the Pedal Pro Fish 3.2M and 4M XL kayaks to provide an electric motor-powered option for users. It comes with two foams that need to be combined with the electric motor body to complete the installation process. The motor is mounted in the middle hole of the kayak and is secured with two ribbon ties. The power interface needs to be connected for the motor to function.

Product Usage Instructions

1. Start by combining the two foams with the electric motor body.
2. Place the set into the middle hole of the kayak.
3. Secure the motor in place by tying it down with the two ribbon ties.
4. Connect the power interface to the motor.
5. Turn on the motor and adjust the speed as required.
6. When finished, turn off the motor and disconnect the power interface.

Always follow safety guidelines provided in the user manual and ensure that the kayak and motor are used in appropriate conditions.

INSTALLATION INSTRUCTION

1. Combine two foams with electric motor body
   • It should then look like this:
2. Put the set into the middle hole of the kayak
3. Connect the two ribbon ties and connect the power interface.

baysports.com.au

Documents / Resources

| BAY SPORTS Electric Pod Motor for Pedal Pro Fish 3.2M and 4M XL [pdf] Installation Guide
3.2m, 4m XL, Electric Pod Motor for Pedal Pro Fish 3.2M and 4M XL, Electric Pod Motor, Pod Motor for Pedal Pro Fish 3.2M and 4M XL, Pod Motor, Pod Motor for Pedal Pro Fish
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>