Blueair Pure411 Air Purifier User Manual

: June 10, 2024
: Blueair

Table of Contents

Blueair Pure411 Air Purifier
Product Information and Usage Instructions
General safety instructions
- General
- Intended Use
SYSTEM OVERVIEW
What in the Box
USAGE
SET UP
ON/OFF AND OPERATING SPEEDS
FILTERS
CARE AND MAINTENANCE
SPECIFICATIONS
Contacts
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Blueair Pure411 Air Purifier

Blueair-Pure411-Air-Purifier-product

Product Information and Usage Instructions

Product Information

The Blueair Air Purifier is a household electrical appliance that helps purify the air in your home. The product is available in multiple languages – English, German, Spanish, French, and Polish.

The Blueair Air Purifier comes with a user manual that includes safety instructions, system overview, usage instructions, setup instructions, filter replacement instructions, care and maintenance instructions, and specifications. The product has a bayonet connection, a fan, a motor, a particle filter or particle + carbon filter, an ion chamber, and a printed circuit board. The air purifier also includes a fabric pre-filter that is available in various colors and designs. The product is designed to be used in an upright position on the floor and requires an electrical outlet to function.

Usage Instructions

To use the Blueair Air Purifier:

Place the unit in an upright position on the floor in your room, ensuring that it won’t be knocked over by any person or pet in the household.
Ensure that the unit is placed where air can circulate freely in, out, and around the unit.
Use the power cable provided with your Pure 411 unit to plug directly into an appropriate electrical outlet. (Refer to the rating label on your unit).
Press the touch button to turn on the air purifier.
The air purifier has multiple operating speeds. Press the touch button repeatedly to cycle through the different operating speeds.
The light on the air purifier will automatically dim after 5 seconds.
Remember to always disconnect the power supply before servicing the unit.
Supervise children to ensure that they do not play with the appliance.

By following these instructions, you can effectively use the Blueair Air Purifier to purify the air in your home and enjoy the clean and fresh air.

General safety instructions

Remember, Pure 411 is an electrical appliance. Please read these safety instructions carefully before use and take the necessary precautions to reduce the risk of fire, electric shock or injury.

WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.

CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

General

WARNING

To avoid hazardous conditions, only the manufacturer, a service center authorized by Blueair or similarly qualified persons shall replace the power cord, if damaged.

CAUTIONS

Use the power cable provided with your Pure 411 unit to plug directly into an appropriate, electrical outlet. (Refer to the rating label on your unit).
Do not alter the plug in any way.
Remember to always disconnect the power supply before servicing the unit.
Do not use the unit if the power cable or plug is damaged or malfunctions in any manner.
Keep the power cable away from heated surfaces.
Do not sit on, stand or climb onto the unit or use the unit either as a table or for storage.
Do not place any objects on top of the unit, block air outlets or intakes,or allow foreign objects to enter the unit as this may cause an electric shock or damage the unit.

Intended Use

CAUTIONS

Supervise children to ensure that they do not play with the appliance.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

SYSTEM OVERVIEW

Blueair-Pure411-Air-Purifier-fig-1

Touch button
Air outlet
Ion chamber (Airstream optimizer)
Bayonet connection
Fan
Motor
Fan holder
PCB – Printed Circuit Board
Filter shelf
Circular rubber foot
Inner structure
Bottom plate
Pre-filter
Main filter (Particle filter or Particle + Carbon filter)

What in the Box

Pure 411 package

Blueair-Pure411-Air-Purifier-fig-2

The Pure 411 air purifier
Particle or Particle + Carbon filter
Fabric pre-filter

Options

Particle filter (replacement filter)
Particle + Carbon filter (replacement filter)
Choice of color and design for the fabric pre-filter.

USAGE

Placement

Place Pure 411 in an upright position on the floor in your room. Be sure to place the unit where it won’t be knocked over by any person or pet in the household.

Using Pure 411 in your bedroom:

After 5 seconds the light automatically dims.

Placing the unit

Place the unit in a location where air can circulate freely in, out and around the unit.
Do not place the unit closer than 10 cm (4”) from another object.
Do not place the unit directly on or against soft furnishings such as bedding or linen.
Do not place the unit near sources of heat, such as radiators, fireplaces or ovens.
Do not place the unit near wet areas, such as bathrooms or laundry rooms where it may come into contact with water.
Do not place the unit outdoors.

SET UP

Getting started

Plug in your Pure 411 air purifier.
Press the top button to turn the unit on.
- Adjust the speed setting to the required level (see “On/off and speed control”)

ON/OFF AND OPERATING SPEEDS

On/off and speed control

On/Low: Press once to turn the unit on and set it to the recommended energy-efficient speed.
Medium: Press twice to set to medium speed 2.
High: Press three times to set to high speed 3.
- The light on the touch button indicates the selected speed.
- Moreover, Pure 411 has an Autostart feature. This means that Pure 411 will automatically restart at the set speed if a power failure occurs, the unit is unplugged or a power switch timer is used.
Off: Press a fourth time to turn the unit off.

FILTERS

General information

The unit is delivered with the fabric pre-filter and either a Particle filter or a Particle + Carbon filter. These filters remove the following pollutants:

Particle filters remove

Particle + Carbon filters remove all the above pollutants, plus

Particle matter smaller than 2.5 microns

IMPORTANT

Use only genuine Blueair filters to ensure proper function of your unit.

Button control functions

Change filter: When the indicator light turns red (after 6 months of operation) you should change the main filter.
Reset filter alert: Press the button down for a duration of five seconds to reset the filter alert.

Vacuum or wash the pre-filter

Occasionally vacuum the exterior of the fabric pre-filter to remove dust.
Always unplug the unit before removing the fabric pre-filter.

Blueair-Pure411-Air-Purifier-fig-15

Carefully push the top cylinder down, at the same time rotating it counterclockwise to open the bayonet lock inside.
Remove the top cylinder from the unit.
Remove the pre-filter from the unit.
Wash the pre-filter in the washing machine, according to instructions on the pre-filter´s label.
Attach the prefilter onto the unit.
Carefully push the top cylinder down, at the same time rotating it clockwise to secure it back into the bayonet lock.
Plug in your Pure 411 air purifier.

Change the main filter

Always unplug the unit before changing the main filter.

Blueair-Pure411-Air-Purifier-fig-17

When the indicator light glows red, it’s time to change the main filter.
Turn off the unit and unplug it.
Carefully push the top cylinder down, at the same time rotating it counterclockwise to open the bayonet lock inside.
Remove the top cylinder from the unit.
Remove the pre-filter from the unit.
Carefully remove the filter shelf.
Grip the filter handles and pull upwards to remove the main filter from the unit.
Position the new main filter onto the inner structure. The filter handles should face upwards.
Press the filter shelf firmly into position above the main filter. The filter shelf protects the top edge of the main filter from damage.
Attach the pre-filter over the main filter. The pre-filter should only cover the filter shelf, and not the inner filter ring of the filter holder unit.
Carefully push the top cylinder down, at the same time rotating it clockwise to secure it back into the bayonet lock.
Plug in your Pure 411 air purifier.
Press the touch button for a duration of 5 seconds to reset the filter replacement timer. This lets Pure 411 know that you have changed the filter. The indicator light flashes 3 times, and then changes from red to white.

CARE AND MAINTENANCE

General care

Take good care of your Pure 411 to ensure that it delivers optimal performance.

Vacuum the pre-filter occasionally to remove dust, or wash it on a gentle, low-temperature cycle in the washing machine.
Change the main filter every six months, depending on the operating conditions. Remember to unplug the unit before changing the main filter.
When the unit is open to change the filter, vacuum any dust that may have accumulated inside the unit.
Occasionally wipe the top of the unit with a dry dust cloth.

SPECIFICATIONS

Blueair-Pure411-Air-Purifier-fig-21

Blue is available in different colors for model Pure 411. The colored fabric works as a pre-filter.

Certified ratings as stated are based on models with Particle Filter for Blue Pure 411. Ratings may be affected by use of other Blue filter models.
Air changes per hour are calculated on the recommended room size, assuming 8-foot (2.4-m) ceilings. For smaller rooms, the air changes per hour will increase.
Depending on air quality in the area of use, the recommended six-month filter lifetime may be longer.