JIECANG JCHR35W5C1 Remote Controller User Manual
- June 10, 2024
- JIECANG
Table of Contents
JIECANG JCHR35W5C1 Remote Controller
Product Info
a. Front
b. Back
b. Number of Channels Setting
Note: Max & Min number is 16& 1 when it’s set under channel 1-16.
c. Number of Groups Setting
Note: Max & Min number is 6&0 when it’s set under channel 0.
d. Channel in Group Setting
Note: Channel in groups setting is under GROUP 1-6.
e. Check the Channels in Groups
Note: LCD will show “EC” if there is no detailed channel.
f. Prohibit Dual-key Operation
② Repeat the above, dual-key operation activated
Note: When dual-key operation prohibited, these programming setting functions are not allowed, such as limits setting.
g. Position Percent Setting
Note: All the shades under same group will run to same position after percent setting.
h. Hot Key to the Fav. Position
Note: The Fav. position setting only can be done after limits set.
i. For other operations, please refer to the motor operation instruction
Models & Parameters (more info please refer to the nameplate)
| Electrical Specification | Standard |
|---|---|
| Battery Type | CR2430’31r2 |
| Working Temperature | -10″C-50″C |
| Radio Frequency | 433.92M ± 100KHz |
| Transmit Distance | >=30m indoor |
Caution!
- The transmitter should not be exposed to moisture or impact, so as not to affect its life
- During use, when the remote control distance is significantly shorter or less sensitive, please check whether the battery needs to be replaced.
- When the battery voltage is too low, the LED screen will show a low voltage prompt, indicating to replace the battery.
- Please properly dispose of used batteries according to the local garbage classification and recycling policy.
Instructions
a. Channels & Groups Toggling
Note: Channel 0 is the group control for all the channels.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>