Zhejiang Jiecang Linear Motion Technology JCB35H7B1 Control System Instructions
- June 6, 2024
- Zhejiang Jiecang Linear Motion Technology
Table of Contents
Instructions
When installing and using electrical equipment, basic safety precaution should always be followed to avoid a risk of fire, electric shock, or injury to persons:
- this appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- children shall not play with the appliance.
- cleaning and user maintenance shall not be made by children without supervision.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- This appliance is use for in Household, Shops, Offices, Hotels, Motels etc. and other similar environments. Not to be opened by unauthorized personnel.
- RISK OF ELECTRIC SHOCK. Insert the plug only into a properly socket. If it does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
- WARNING: For indoor use only.
- For use in pollution degree 2 environment.
- The linear actuator is only to be used with specified control unit JCB35H7B1, do not use attachments not recommended by the manufacturer.
- The linear actuator must only be supplied at safty extra low voltage corresponding to the marking on the appliance.
- Do not use the appliance when the load exceed the rating.
- Always unplug this appliance from the electrical outlet before cleaning.
- Do not put on or take off the part when up & down movement.
- Keep the cord away from heated surfaces.
- Never drop or insert any object into any opening.
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
- To disconnect, turn all controls to the off position, then remove plug from outlet.
- WARNING: Risk of Injury – Keep children away from the appliance when operation.
- Always put heavy load on suitable position to prevent the possibility of the appliance tipping over.
- Any servicing is to be performed by an authorized service representative, the appliance has no user serviceable parts.
- Please attention to electrical and mechanical hazards during use.
- Make sure the right tools and assembly parts are used when mounting the system.
- Be aware that the control box can only be connected to the voltage printed on the label.
- Make sure that no persons or items will collide with the frame, when adjusting upwards and downwards.
- Always pay attention, that the maximum load capacity per linear actuator, must not exceed more than max load.
SAVE THESE INSTRUCTIONS
Introduction
When connected together, Linear actuator and control system JCB35H7B1 consists
of an electric height adjustable lifting system normally assembled in height
adjustable device, work stations and similar appliances.
There are several types of linear actuator to match with it,the main types are
JC35L6,JC35D4,JC35L16. this control box could control two linear actuators
maximum.
There are one models Control system: JCB35H7B1.
The system consists of the spindle system, motor system, Control Unit, which
described above and remote control JCHR35Dx/JCHR35H6Ex.
The spindle system and motor is normally assembled inside the height
adjustable leg constructions to become linear actuator.
The control system JCB35H7B1 is normally mounted together with lifting system
with only four screws in a reachable distance enable the user to cut off the
main power.
Specifications
JCB35H7B1 series
Specifications:
Actuator quantity| 2| Duty cycle| 10% , Max 2min
continuous working
---|---|---|---
input voltage(VDC )| 29| Overload protection| Separate protection
Output voltage (VDC )| 24| IP degree| IP20
Humidity| 35%-75%| Actuator connector| JC35L6/JC35D4/JC35L16
Atmosphere| 860hPa—1060hPa| Environment temperature| +5 ℃~+40 ℃
JCB35H7B1dimension and connection
- Handset (Dimensions)
- Connections
Basic Settings
Press button and not release, the actuator M1 move up, release the button, the
actuator stop moving;
Press button and not release, the actuator M1 move down, release the button,
the actuator stop moving.
Press button and not release, the actuator M2 move up, release the button, the
actuator stop moving;
Press button and not release, the actuator M2 move down, release the button,
the actuator stop moving.
Press button and not release, the actuator M3 move up, release the button, the
actuator stop moving;
Press button and not release, the actuator M3 move down, release the button,
the actuator stop moving.
Press button and not release, the actuator M1,M2,M3 move down, release the
button, the actuator stop moving.
Memory location A
Memory location B
ZG
location
ANTISNORE location
Night light
motor work
motor stop
motor work
M1 is the leg putter, M2 is the right back putter, M3 is the left back putter
General Information
Product test approvals:
EN 60335-1: Household and similar electrical appliances – Safety – General
Requirements (LVD)
EN 62233: Electromagnetic fields of household appliances and similar apparatus
with regard to human exposure (EMF)
EN55014-1: Electromagnetic Compatibility (EMI)
EN55014-2: Electromagnetic Compatibility (EMS)
2015/863/EU: EC Directive on the restriction of the use of certain hazardous
substances in electrical and electronic equipment
Environment
Meaning of crossed –out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities.
Contact you local government for information regarding the collection systems
available.
If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain, damaging
your health and well-being.
When replacing old appliances with new ones, the retailer is legally obligated
to take back your old appliance for disposals at least free of charge.
Pairing instructions for control box and remote control
Pairing function: after the control box is powered on, the control box enters
the learning state, and the green light of the control box flashes
continuously. In the learning state, press the “back up” and “leg up” buttons
of the remote control at the same time until the control box will emit the
voice “di”. At the same time, the blue backlight of the remote control flashes
twice, indicating the completion of learning, and the green light of the
control box stops flashing。
FCC Statement:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference,and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED RSSWarning:
This device complies with Innovation, Science and Economic Development Canada
licenceexempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device.
ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.