JENSEN JHD922BT USB Heavy Duty Radio Instruction Manual

JENSEN JHD922BT USB Heavy Duty Radio Instruction Manual

INTRODUCTION

System Features

Features of Jensen JHD962BT mobile audio system include:

• Full Dot Matrix LCD
• AM/FM (US/Europe /Japan/Russia) Tuner with 30 Presets(12AM, 18FM)
• RBDS (Radio Broadcast Data Service) with PTY Search
• Weatherband Tune
• DAB+ Digital Radio
• Mute
• Bluetooth Streaming Audio (Supports A2DP, AVRCP and HFP)
• Loudness
• Electronic Bass, Treble and Balance Controls
• Maximum Output Power 9W x 2
• Clock 12/24 Hour Selectable
• Work Clock Timer
• Low Battery Alert
• Illumination Dimming
• USB Charging
• 2-Channel Pre-amp Line Level Outputs
• 2- Wire Power with Non-Volatile Memory and Clock/Time support
• Compatible with JMICHFP hands free microphone (sold separately)
• APP Control Ready

Content List

• Jensen Heavy Duty Radio
• Hardware Kit
• Mounting Bracket
• Quick Reference Guide

HARDWARE KIT CONTENTS

SAFETY INFORMATION

When Driving

Keep the volume level low enough to be aware of the road and traffic conditions.
When Washing Your Vehicle
Do not expose the product to water of excessive moisture. Moisture can cause electrical shorts, fire or other damage.
When Parked
Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the interior a chance to cool down before starting playback.
Use the Proper Power Supply
This product is designed to operate with a 12 volt DC negative ground battery system.

WARNING:

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED

INSTALLATION

Mounting the Bracket

Two options are provided for mounting the bracket (self- tapping screws or machine screws with nuts) to ensure a mounting option ideal for your mounting location. Avoid obstructing airflow to the rear cooling fins on the radio.
Notes: Mounting holes should be drilled to 7/32”. Before drilling the mounting holes, make sure the area behind the panel where the holes are desired is clear of wires and fuels, vacuum and or brake lines.

Attaching the Radio

Once the bracket is securely mounted, use the four included M4 machine screws to fasten the bracket to the back of the radio. Alternatively, the radio can be mounted directly to the instrument panel if access to the rear of the instrument panel.
CAUTION! Do not over tighten the 4 mounting screws. Hand tighten only.

WIRING

BASIC OPERATION

Power On/Off

Press the POWER button (1) to turn the unit on. The unit will resume at the last mode (Tuner, BT, etc.) after turn on. Press and hold the POWER button (1) to enter standby mode.

Volume Control

To increase the volume, press the button (20). To decrease the volume, press the button(19).

Play/Pause/Mute

Press the     button (18) on the control panel to pause or mute the audio output. Press button again to unmute or restore the audio output to the previous level.

Mode

Press the MODE button (2) to select a different mode of operation, as indicated on the display panel. Available modes include the following: FM > AM

Weather Band > BT Audio. FM is the default source mode on initial power up.
NOTE: DAB+ Digital Radio mode will be skipped when the Region menu option is set to “USA/ Russia / Japan”.
NOTE: Weatherband mode will be skipped when the Region menu option is set to “Europe/ Russia / Japan”.

Reset

The RESET button (10) should be activated for the following reasons:

• Initial installation of the unit when all wiring is
• Function buttons do not
• Error symbol on the

Use a ball point pen or thin metal object to press the reset button. This may be necessary should the unit display an error code.

Audio Menu

Press the SETUP button (11) to access the audio menu. You can navigate through the audio menu items by pressing the SETUP button repeatedly or or buttons (9, 8). Once the desired menu item appears on the display, adjust that option by pressing the or buttons (20, 19) within 5 seconds. The unit will automatically exit the audio menu after five seconds
of inactivity. The following menu items can be adjusted.

Loudness:

Press the or buttons (20, 19) to toggle the loudness on/off. When listening to music at low volumes, this feature will boost the bass/treble range to compensate for the characteristics of human hearing.

Bass Level

Press the or buttons to adjust the Bass level range from “-7” to “+7”.

Treble Level

Press the or buttons to adjust the Treble level range from “-7” to “+7”.

Balance

Press the or buttons to adjust the Balance between the left and right speakers from “Left 7” to “Right 7”.

System Menu

1. Press and hold the SETUP button (11) for more than 2 seconds to enter the system
2. Press the SETUP button repeatedly or or   buttons (9, 8) to navigate the system
3. Press the or buttons (20, 19) to adjust the selected menu Press the ENTER/TIMER button (6) to select the desired item.

The unit will automatically exit the system menu after 5 seconds of inactivity. The following items can be adjusted:

• LCD Dimmer (1-10): Adjust LCD backlight

• LCD Contrast (1-10): Adjust LCD contrast

• Bluetooth Devices: Press to ENTER/TIMER button (6) to enter sub-menu. Press or                     buttons (9, 8) to navigate List loops. Press E NTER/TIMER button to select device. Press    or   to navigate selected device’s menu of available options (Lock/Unlock > Connect/ Disconnect

Delete and List loops). Press ENTER/TIMER button to select options.

• Lock/Unlock: Press ENTER/TIMER button to lock or unlock Lock icon displays next to device name in menu when device is locked.
• Connect/Disconnect: Press ENTER/TIMER button to connect or disconnect previous paried
• Delete: Option only available if selected device is Press ENTER/TIMER button to delete.
• Call Auto Answer (On/Off): Turn call auto answer setting On/Off.
• Call Volume (On/Off): Adjust call volume Decrease/ Increase
• Clock Set: Setting the clock (HH:MM) and hour
• Low Voltage Alarm (On/Off): Monitor voltage on ACC line and send alert when voltage is
• Low Voltage Auto Off (On/Off): Automatically turn off power to radio when battery voltage is
• Preset-Only Tuning (On/Off): If ‘Preset-Only Tune’ is set to

‘On’ in System Settings, only presets from all bands are recalled in sequence.

• Tuning Region (USA/EURO/RUSSIA/JAPAN): Set frequency spacing for various
  • USA Tuning Region (AM > FM > WX > Bluetooth)
  • Europe Tuning Region (AM > FM > DAB+ > Bluetooth)
  • Japan & Russia Tuning Region (AM > FM > Bluetooth)
• DAB+: Press to ENTER/TIMER button to enter sub-menu. Press or         buttons to navigate
  • Announcements: Press to ENTER/TIMER button to enter sub-menu.
  • New Flash (On/Off)
  • Transport Flash (On/Off)
  • Area Weather Flash (On/Off)
  • Warning/Service (On/Off)
  • Event Announcement (On/Off)
  • Antenna Power (On/Off): Turn supplied power On and Off to the DAB antenna
  • Clock Sync (On/Off): To synchronize the clock
• Key Beep (On/Off): Turn the audible beep On/Off (heard when functions/ buttons are selected). Beep tone off will not affect Battery Alarm audible
• Reset System Defaults: Press the ENTER/TIMER button and Press or buttons to select Confirm. Press the ENTER/ TIMER to return the unit to factory default set up
• System Info: Display firmware version

NOTE: Bluetooth Device menu options are only available while the Bluetooth feature is ON and the radio is in
Bluetooth Audio mode.

NOTE: A locked Bluetooth device will not be overwritten from the list.

Low Voltage Alarm Operation

If Low Voltage Alarm is set to “On”, an alarm will sound (8 beeps every 30 sec) when the voltage drops to 10.5V (+/- 0.3V). A visual warning (LOW VOLTAGE) will appear, Press any button to dismiss visual warning, (reappear every

10-minutes) in the LCD display.

NOTE: “Off” is the default setting for Low Voltage Alarm.
If the audio is muted or the volume is set to 0, the audible beep will not be heard. __

__ Liquid Crystal Display (LCD)

The liquid crystal display (LCD) panel (4) displays the frequency, time and activated functions.
Press the POWER button (1) to turn the dimmer On (selected brightness level) and press again to turn dimmer Off (maximum brightness level).
NOTE: LCD panels may take longer to respond when subjected to cold temperatures for an extended period of time. In addition, the visibility of the characters on the LCD may decrease slightly. The LCD display will return to normal when the temperature increases to a normal range.

__ Setting the Clock

To set the clock to display the current time, turn the vehicle ignition on and turn the radio on. Enter the system menu and adjust the clock by selecting the “Set Clock” menu item.

• Press ENTER/TIMER button (6) to enter clock setting
• Press or   to select hours, minutes, or 12/24 hour
• Press or to adjust the setting

When no adjustment is made, the time will become set and normal operation will resume.

Setting Work Timer

To activate the work timer clock and running in the background,

• Press ENTER/TIMER button (6) to display work
• Press ENTER/TIMER button again to start/stop work
• Press & hold ENTER/TIMER button to reset work
• Press RETURN button (5) to exit work timer

If timer is exited while running, “TIMER” flashed every 10 seconds for 2 seconds in place of clock in footer right on the display.

TUNER OPERATION

Select a Band

Press the BAND/PTY button (3) to change between FM1, FM2, FM3, AM1 and AM2.

Manual Tuning

Press & hold the    or   buttons (9, 8) to seek stations up/ down step by step.

Auto Seek Tuning

Press the    or   buttons (9, 8) to automatically seek the next or previous strong station.
NOTE: Seek tuning is not available for weather band channels. Use the up or down tuning buttons to manually select any of the seven available weather band channels.

Preset Stations

Six numbered preset buttons store and recall stations.
Store a Station
Select a station, then press and hold a preset button from 1 – 6 on the number buttons (12-17) for two seconds. The preset number will appear on the LCD.
Recall a Station
Press a preset button from 1 – 6 on the number buttons to select the corresponding stored station.
NOTE: Preset buttons are pre-assigned frequencies in weather band mode.

Automatically Store / Preset Scan (AS/PS)

Automatically Store
Select an AM or FM band. Press and hold the AS•PS button (5) for 2 seconds to automatically select 6 strong stations. “Storing Presets” appears on the screen and the new stations replace any stations already stored.
Preset Scan
Select a band. Press AS•PS to scan stations stored in the current band. The unit will pause for 10 seconds at each
NOTE: Radio stations broadcasting RBDS may not be available in your listening area.
In FM radio mode, press & hold the BAND/PTY button (3) for 2 seconds to list the following Program Type (PTY) options: ANY / News / Information / Sports / Talk / Rock / Classic Rock

/ Adult Hits / Soft Rock / Top 40 / Country / Oldies / Soft / Nostalgia / Jazz / Classical / Rhythm and Blues / Soft Rhythm & Blues / Foreign Language / Religious Music / Religious Talk

/ Personality / Public / College / Weather / Emergency Test / Emergency.

To search for stations in a PTY category:

1. Press the BAND/PTY button to view the current PTY
2. Press the or   buttons to move through the list of available categories and select the program type you wish to
3. After selecting the desired PTY, press the ENTER/TIMER button (6) to search the band for broadcasts of this “Searching PTY” is displayed while the tuner is searching.
   preset station. Press AS•PS again to stop scanning when the __ desired station is reached.

RBDS Operation

This unit is equipped to display RBDS (Radio Broadcast Data Service) information when broadcast by the radio station.
NOTE: Performing a PTY search on “ANY” will Seek Tune and stop on any station broadcasting RBDS, regardless of the program type.
NOTE: The RBDS (Radio Broadcast Data Service) is disabled when the Preset-Only Tuning is On in system menu.

Weather Band Operation

What is the NOAA Weather Radio/Weatheradio Canada? NOAA (National Oceanic and Atmospheric Administration) is a nationwide system that broadcasts local weather emergency information 24 hours a day via the National Weather Service (NWS) network. The U.S. network has more than 530 stations covering the 50 states as well as the adjacent coastal waters, Puerto Rico, the U.S. Virgin Islands and the U.S. Pacific Territories. Each local area has its own transmitting station and there are a total of seven broadcasting frequencies used. A similar system is available in Canada under the Weatheradio Canada service administered by Environment Canada.
Tuning to Weatherband
Press and hold the MODE button (2) repeatedly to reach the Weatherband. The indication “WB” will appear on the display panel, along with the current number and channel indication: “WB-1″, WB-2”, “WB-3”, “WB-4”, “WB-5”, “WB-6” or “WB-7”. The seven frequencies are shown in the following table:

WB Frequencie

The above table also shows which preset button will access the frequency. Note that one frequency cannot be accessed using a preset button. The frequency can only be reached using the tuning controls.
Use the    or   buttons (9, 8) or the preset buttons to tune to each of the seven channels until you find the weatherband station broadcasting in your area.
How many stations can I expect to receive?
Since the broadcasts are local weather and information, the transmission power is usually very low (much less than standard AM or FM stations) so you will usually receive only one station unless you are on the edge of two or more broadcast signals. The most you will receive will be two or three, and that is rare.
Is it possible I won’t receive any stations?
Depending on where you are located, there is a possibility you will receive only a very weak signal or none at all. Also, similar to AM and FM signals, weatherband signals are subject to surrounding conditions, weather, obstructions of the signal by hills or mountains, etc.

DAB+ Digital Radio Operation

Digital Audio Broadcasting (DAB/DAB+) is designed for delivery of high-quality digital audio programs and data services from terrestrial transmitters in the Very High Frequency (VHF) frequency bands.
For more information about (DAB/DAB+) services and to find a list of stations available in your area visit www.worlddab.org

Select a Band

Press the BAND/PTY button (3) to change between DAB+1, DAB+2 and DAB+3 band.

Service List Update

Press and hold the AS•PS/RETURN (SLU) button (5) to start service list update, The “Service List Updating” will display and start updating the service list. Press AS•PS/RETURN (SLU) button to cancel service list update.

Select a Service

Press and hold the BAND/PTY(SL) button (3) to display Service list menu. While in Service list, press or   buttons (9, 8) to navigate down or up service list respectively (list loops). Press ENTER/TIMER (6) to select desired Service label and system exits to current selected Service label screen.

Search for An Ensemble

Press and hold the     or   buttons (9, 8) to automatically search for an available ensemble, service or component to play. Press  or       buttons (9, 8) to manual select an ensemble. Press ENTER/TIMER (6) to confirm.

Store or Recall Service

Six numbered preset buttons store and recall stations.
Store a Service
Select a station, then press and hold a preset button from 1 – 6 on the number buttons for two seconds. The preset number will appear on the LCD.
Recall a Store Service
Press a preset button from 1 – 6 on the number buttons to select the corresponding stored service.

BLUETOOTH OPERATION

The JHD962BT includes built-in Bluetooth technology that allows you to connect this head unit to Bluetooth devices for streaming audio playback.

About Bluetooth Technology

Bluetooth is a short-range wireless radio connectivity technology developed as a cable replacement for various electronic devices. Bluetooth operates in 2.4 GHz frequency range and transmits voice and data at speeds up to 2.1 Mbit/s over a range of up to 10 meters.

Bluetooth Menu Options

NOTE: Please note that some BT menu options are only available while the unit is in Bluetooth Audio mode.
Press and hold the SETUP button (11) for more than 2 seconds to enter the system menu. Press the SETUP button repeatedly or      or         buttons (9, 8) to view the Bluetooth Setup Menu options. Press ENTER/TIMER button (6) to choose the highlighted option.

• Call Auto Answer : Press the or buttons (19, 20) to turn the Auto Answer function “On” or “Off”.
• Call Volume : Press the ENTER/TIMER button repeatedly to adjust the call volume from 0-40 (default volume is 30).
• BT Device List : Press the ENTER/TIMER buttons to view a list of previously paired mobile phone device Press the or         buttons to navigate devices from the list. You cannot delete a device that is actively connected.

Press the ENTER/TIMER button to select the device. Press the or buttons to choose Lock/Unlock, Disconnect or Delete for this device.

• LOCK/UNLOCK : The JHD962BT can store up to 5 devices for Bluetooth connection. The devices are stored in FIFO (First in First Out) order. To prevent a device from being bumped from the list when more than 5 devices are used, you must lock the To lock/Unlock a device, press

the ENTER/TIMER button to display/change the Locked or Unlocked icon.

• DISCONNECT : To disconnect a paired device, press the ENTER/TIMER button to temporarily remove the Bluetooth The link can be re-established through your phone menu by selecting the JHD962BT for connection.
• DELETE : To delete a device from the list, press the ENTER/ TIMER

NOTE: Device must be disconnected to be deleted.

Pairing a Bluetooth Device

Before you begin, consult the owner’s manual for the Bluetooth device you want to pair with the JHD962BT. Bluetooth Quick Pair:

1. On your personal Bluetooth device, enter the Bluetooth settings list. Make sure your device has Bluetooth turned on and is searching for new
2. Press and hold the MODE/PAIR button (2) for three seconds to make the JHD962BT available on your Bluetooth
3. On your Bluetooth device, select JHD962BT once it becomes available to pair and connect your Enter the pairing password (0000), if requested.

After connecting successfully, you will be able to listen to music stored on your Bluetooth enabled device through the radio.

BT Audio (A2DP)

The A2DP music is available for Bluetooth enabled phones when the phone is connected. To access Bluetooth mode and play songs stored on your phone, press the MODE/PAIR button. While in Bluetooth mode, the Bluetooth Audio icon will appear on the LCD.
Selecting Tracks
During playback, press the     or   buttons (9, 8) buttons to play the previous or next track.
Pausing Playback
During playback, press the      button (18) to pause the Bluetooth AUDIO player. “Pause” will appear on the LCD. Press
again to resume playback. If you change to another mode, the mobile phone audio will pause. Press the MODE/PAIR button (2) to return to Bluetooth mode and resume mobile phone audio playback.

NOTE: If a Bluetooth device is disconnected due to the power being turned off or if the device is disconnected inadvertently, the unit will automatically search for the matching Bluetooth device when the power is restored.

__ Incoming/Outgoing calls

While the mobile device is connected through Bluetooth, the phone number for incoming calls will appear on the LCD. The incoming ring will be output through the unit.
Answer Call
If the Bluetooth Auto Answer function is turned “Off”, the user must press the “ CALL ” button (7) to receive an incoming call. If the BT Auto Answer function is turned “On”, the unit will automatically receive the incoming call after 5 seconds of ringing.
While the microphone (JMICHFP) is connected to the unit, the user can answer incoming calls through the Microphone.
Transfer Call
During the call, press and hold the “ CALL ” button transfer the call between the unit and the mobile device.
End Call
Press the “ CAL L” button to end a call. The unit will return to the previous mode.
Reject Incoming Call
To reject an incoming call, press and hold the “ CALL ” button.
Outgoing Call
Press the “ CALL ” button to call last call out number.

APP OPERATION

ASA Audio App Controller is the ultimate wireless remote control for your JENSEN stereo system. Store away your old remotes and enjoy the convenience of all the primary functions of your JENSEN stereo right from your phone or tablet by transforming your mobile device into a functional stereo remote control!

Features

This app controls all of the primary functions of your stereo features including:

• Power on/ off
• Volume and mute
• Source mode selection
• Playback, tuning, switch song
• Audio menu controls- bass, treble, balance, fader, Loudness, volume and speaker

Connecting and using ASA Audio Control app The ASA Audio Control app can be found on the App Store for Apple Devices and the Google Play Store for Android Devices. After downloading and installing ASA Audio Control app on your device, pair your device to the JHD962BT as stated above for Bluetooth pairing. Once your device is paired you can open and begin using the app.

When ASA Audio Control is installed on Android operating system, close the app before Bluetooth pairing, otherwise there may be errors on Bluetooth connection.

CARE AND MAINTENANCE

• Keep the product dry. If it does get wet, wipe it dry Liquids might contain minerals that can corrode the electronic circuits.
• Keep the product away from dust and dirt, which can cause premature wear of
• Handle the product gently and Dropping it can damage circuit boards and cases, and can cause the product to work improperly.
• Wipe the product with a dampened cloth occasionally to keep it looking Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the product.
• Use and store the product only in normal temperature High temperature can shorten the life of electronic devices, damage batteries, and distort or melt plastic parts.

Ignition

| | Symptom| Cause| Solution
---|---|---
No power| The vehicle’s accessory switch is not on| If the power supply is properly connected to the vehicle’s accessory terminal, switch the ignition key to “ACC”.
Fuse is blown| Replace the fuse.
No sound| Volume too slow| Adjust volume to audible level.
Wiring is not properly connected| Check wiring connections.
The operation keys do not work| Control panel is not properly installed| Reinstall control panel.
Built-in microcomputer is not operating properly due to noise| Press the RESET

button.

Cannot tune to radio station, auto-seek does not work| Antenna cable is not connected| Insert the antenna cable firmly.
Signals are too weak.| Select a station manually.
ERROR-01

on LCD

| Database or decoder error| Change to another mode.

The most common source of noise in reception is the ignition system. This is a result of the radio being placed close to the ignition system (engine). This type of noise can be easily detected because it will vary in intensity of pitch with the speed of the engine.
Usually, the ignition noise can be suppressed considerably
by using a radio suppression type high voltage ignition wire and suppressor resistor in the ignition system. (Most vehicles employ this wire and resistor but it may be necessary to check them for correct operation.) Another method of suppression is the use of additional noise suppressors. These can be obtained from most CB radio or electronic supply shops.

Interference

Radio reception in a moving environment is very different from reception in a stationary environment (home). It is very important to understand the difference.
AM reception will deteriorate when passing under a bridge or when passing under high voltage lines. Although AM
is subject to environmental noise, it has the ability to be received at great distance. This is because broadcasting signals follow the curvature of the earth and are reflected back by the upper atmosphere.

TROUBLESHOOTING

SPECIFICATIONS

FM Radio

Frequency Coverage (USA)………………………………………………………………………………………….. 87.5 to 107.9 MHz
Frequency Coverage (Europe/ Russia/ Japan)…………………………………………………………………………………………. 87.5 to 108 MHz
Sensitivity (S/N = 30dB)…………………………………………………………………………………………… μV
Stereo Separation……………………………………………………………………………………… >25 dB

AM/MW

Frequency Range (USAl)…………………………………………………………………………………………….. .. 530-1710 kHz
Frequency Range (Europe/ Russia/ Japan)…………………………………………………………………………………………… .. 522-1629 kHz
Sensitivity (S/N=20dB)……………………………………………………………………………………… 30 dB

General

Frequency band(s) (for Bluetooth)………………………………………………………………………… 2.4~2.4835GHz
Maximum radio-frequency power transmitted (for Bluetooth)………………………………………………………………………………………… 4 dBm
Operating Voltage………………………………………………………………………………………….. DC 12 Volts
Grounding System…………………………………………………………………………………… Negative
Ground Speaker Impedance……………………………………………………………………………………… ..4-8 ohms per channel

Tone Controls:

Bass (at 100 Hz)…………………………………………………………………………………………… ±10 dB
Treble (at 10 kHz)………………………………………………………………………………………….. ±10 dB
Maximum Power Output………………………………………………………………………………………….. 9W x 2
Idle/Standby Current…………………………………………………………………………………….. <50mA
Fuse Rating…………………………………………………………………………………………… 10 Ampere
Max Dimensions……………………………………………………………………………… 131.5 (W) x 57.5 (D) x 86.1 (H)mm

FCC NOTES

WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving
• Increase the separation between the equipment and
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

ASA Electronics Corporation
www.asaelectronics.com www.jensenheavyduty.com
©2022 ASA Electronics Corporation

Read More About This Manual & Download PDF:

References

• Home - ASA Electronics
• Homepage - ASA - Jensen

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>